Guition Jc3636k718c

Guition JC3636K718C - ESPHome working notes

This is the K / Knob series board. Its pinout is different from the JC3636W518

• do NOT reuse W518 pins (display, backlight, touch all differ). The values below come from the official manufacturer demo JC3636K718_knob_EN (pincfg.h + scr_st77916.h) and from making this device actually work.

Board

• ESP32-S3 (240 MHz), 8 MB octal PSRAM @ 80 MHz, 16 MB flash.
• 1.8" round 360×360, driver ST77916 (QSPI), RGB565, colors inverted.
• Touch CST816 (I²C). Rotary knob (rotation only - not pressable).
• Audio out PCM5100A I²S DAC + speaker. Mic = I²S PDM.
• WS2812 LED ring, 13 LEDs, GRB.
• Radios: Wi-Fi 2.4 GHz b/g/n + Bluetooth LE 5.0 (ESP32-S3 has no Bluetooth Classic / BR-EDR → no A2DP; the speaker/mic are I²S, not Bluetooth audio). One shared 2.4 GHz antenna for both.
• microSD (SD_MMC). USB-C; some units have Li-ion + wireless charging.

Pinout (authoritative)

Display QSPI (ST77916):  SCK=11  CS=12  D0=13 D1=14 D2=15 D3=16  RST=17  BLK=21(PWM)
Touch CST816 (I2C):      SDA=9   SCL=10  INT=7  RST=8   (internal SDA/SCL pull-ups)
Knob:                    A=GPIO2  B=GPIO1   (see gotcha - NOT quadrature)
DAC PCM5100A (I2S):      BCK=3  WS/LRCK=45  DO=42   MUTE=46 (LOW=mute, hold HIGH)  no MCK
Microphone (I2S PDM):    SD/data=4  SCK/clk=5
LED ring WS2812:         DATA=0   (13 LEDs, GRB)  -- GPIO0 = BOOT/strapping
Battery ADC:             GPIO6  (~10k/10k divider -> x2)
microSD (SD_MMC):        CLK=39 CMD=38 D0=40 D1=41 D2=48 D3=47

ESPHome component choices that work

• Display: display: platform: mipi_spi, model: CUSTOM, bus_mode: quad, data_rate: 80MHz, invert_colors: true, color_order: rgb, with the full init_sequence from base/core.yaml (ends with 3A=55 for RGB565, 21 invert, 11 sleep-out, 120 ms delay, 29 display-on). The native ST77916 model was dev-only; CUSTOM + manual init runs on stable ESPHome. (qspi_dbi was the platform before v2.2.9; it's deprecated upstream, no predefined ST77916 model exists on mipi_spi either.)
• SPI: type: quad, clk_pin: 11, data_pins: [13,14,15,16]. CS/RST go on the display: block (cs_pin: 12, reset_pin: GPIO17), not on spi:.
• Touch: touchscreen: platform: cst816, interrupt_pin: 7, reset_pin: 8, on the i2c bus sda: 9 / scl: 10.
• Backlight: output: ledc on GPIO21 → light: monochromatic.
• Audio: i2s_audio (out: bclk=3, lrclk=45; in: lrclk=5), speaker: i2s_audio (dout=42, dac_type: external), microphone: i2s_audio (din=4, pdm: true, 16 kHz). DAC MUTE on GPIO46 must be held HIGH → a switch: gpio with restore_mode: ALWAYS_ON.
• LED ring: light: esp32_rmt_led_strip, pin: GPIO0, num_leds: 13, channel_colors: GRB (ESPHome 2026.8.0+; older uses rgb_order: GRB), chipset: WS2812, rmt_symbols: 64.
• Knob: two binary_sensor: gpio (GPIO2 and GPIO1), inverted: true + pullup, act on on_press. See gotcha.
• esp32: flash_size: 16MB, partitions: partitions.csv, framework esp-idf. psram: mode: octal, speed: 80MHz.

Gotchas / lessons learned (the important part)

1. The knob is NOT a quadrature encoder. A PCNT rotary_encoder reads zero. Direction is encoded by which pin pulses: left → GPIO2, right → GPIO1, one clean LOW pulse per detent. Read two independent binary_sensor on_press instead. The knob can't be pressed (GPIO0 is BOOT) - trigger actions with a screen tap.

2. Strapping-pin warnings are expected and harmless. GPIO0 (WS2812 ring), GPIO3 (DAC BCK), GPIO45 (DAC WS/LRCK) and GPIO46 (DAC MUTE) are all ESP32-S3 strapping pins used per the vendor pinout - they work fine after boot. There IS a per-pin suppress (ignore_strapping_warning: true, needs the extended pin: {number: ..., ignore_strapping_warning: true} form, not the short pin: GPIOxx) - the config uses it on all four since 2.2.9, so the warnings no longer print. Separately, silence gfonts "missing glyphs" warnings with ignore_missing_glyphs: true (GF_Latin_Core lists combining accents the static Roboto face lacks), or list exact glyphs: for pixel/icon fonts.

3. 16 MB partitions → first flash MUST be over USB. partitions.csv uses big app slots (~7.9 MB). A partition-table change can't be applied via OTA; flash once over USB, then OTA works.

4. LVGL performance is tight on this S3 + QSPI panel.

   • Keep lvgl: buffer_size: 24% (puts the draw buffer in fast internal RAM instead of slow PSRAM at the default 100%).
   • Keep display: data_rate: 80MHz.
   • A rotating full-screen HUD image and an animated radial equalizer were both tried and removed as too laggy. Add heavy full-screen redraws only very carefully.
   • logger: level: INFO - DEBUG is very noisy during voice and adds overhead.

5. Lambda string/symbol pitfalls (LVGL labels):

   • For MDI/Unicode glyphs in C++ lambdas use the actual UTF-8 bytes or chr(0xF....) style - declare each glyph in the font: glyphs: list or it renders as tofu.
   • \n inside a lambda works inline ('...\n...'); inside a block scalar (|-) a literal newline breaks YAML. Keep multi-line label text on one quoted line.
   • Montserrat has no -; guard "no data yet" cases with an empty string, not a dash.

6. Album art (online_image) decodes fine but the LVGL widget won't redraw by itself - you must call lvgl.image.update in on_download_finished. Use http_request: verify_ssl: false for self-signed HA. Skip reloading the same URL to cut flicker. Cover URL comes from the player entity's entity_picture.

7. Fonts, icons and game sprites are fetched at compile time (Google Fonts + MaterialDesign TTF, plus the PNGs under assets/sprites/cool-cars/ and space-wars/ from the GitHub repo), so the build host needs internet. They are baked into the firmware, so at runtime nothing depends on any server.

8. Battery is a heuristic. ADC on GPIO6 (×2), 64-sample oversampling + moving average to fight ETA6003 ripple (no cap on BAT_ADC). Voltage→% is a calibrated lookup (vt[]/st[]) - start ~4.10 V, brownout ~3.20 V - not finished, tune per unit. No STAT pin, so charging detection is "voltage rising or ≥4.13 V".

9. Voice timers: use voice_assistant: on_timer_started/updated/finished/ cancelled. There is no on_timer_tick - do smooth local countdown in an interval and let HA fire finished.

10. Wake word (micro_wake_word) only runs while connected to HA. Start/stop it in on_client_connected/on_client_disconnected and around the VA lifecycle.

11. Debugging: API has no encryption here → stream logs with python scripts/esplog.py <seconds> (set the device host in the script). Don't reflash blind - check logs / HA state first.

12. Timezone resets to UTC at runtime. The homeassistant time platform syncs the epoch but not the zone, so set timezone: explicitly (IANA, e.g. Europe/Warsaw). Worse, ESPHome can reset the device TZ back to UTC mid-run (on a menu restart, or when a log/API client reconnects), so the clock reads UTC until the next sync. Self-heal: capture the resolved POSIX zone at boot via getenv("TZ") into a global, then re-apply it every second with setenv("TZ", g.c_str(), 1); tzset();. Note RealTimeClock has set_timezone() but no get_timezone(), and passing the IANA name at runtime won't work (newlib needs the POSIX string) - which is why you read it back from the env.

13. OTA rollback reverts to the OLD firmware after a quick restart. On esp-idf the bootloader keeps a freshly-OTA'd image only once the boot is marked "good" (safe_mode, default ~1 min). Restarting (e.g. from the on-screen menu) before that rolls back to the previous build - which looks exactly like "my changes didn't stick". Fix: add a safe_mode: block and call safe_mode.mark_successful once the device is clearly up (this repo does it when the boot splash ends), and/or lower boot_is_good_after.

14. ${substitution} inside a flow-mapping { } breaks the YAML parse. The } that closes ${...} is read as the end of the flow map, e.g. image: { id: x, src: avatar${n} } fails with "expected ',' or '}'". Use block style for any line whose value contains a ${...}.

15. Bluetooth is BLE-only and competes hard with voice/LVGL. The S3 has Bluetooth LE 5.0 and no Classic - so no Bluetooth audio (A2DP needs Classic; playback stays on the I²S DAC). What ESPHome can do here is BLE: bluetooth_proxy (relay BLE devices to Home Assistant) or esp32_ble_tracker (beacons / BLE sensors), optionally esp32_improv (BLE Wi-Fi provisioning). It is not enabled in this repo, and it is not free: the BLE stack + Wi-Fi/BLE coexistence share the single 2.4 GHz radio and CPU with micro_wake_word, the voice pipeline and the QSPI/LVGL redraws, and the BLE stack wants internal RAM that is already squeezed (LVGL draw buffer at 24% internal). Expect audio/display hitches, higher heap pressure and possible OOM/brownouts. If you add it: prefer passive scanning, keep active connections to a minimum (bluetooth_proxy raises the BLE connection slots), test heap headroom (logger + free-heap sensor), and consider dropping heavy screens. Treat it as untested on this exact build - validate on-device before relying on it.