Security Secrets
IgorWarzocha/Opencode-Workflows
Review secret detection patterns and scanning workflows. An agent skill from IgorWarzocha/Opencode-Workflows.
Deliver formatted network reports, audit results, topology diagrams, and compliance documentation to Slack channels with rich Block Kit formatting.
Install Slack Report Delivery
$ npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install automateyournetwork/netclaw slack-report-delivery --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/automateyournetwork/netclaw.git skills-src && mkdir -p .claude/skills && cp -r skills-src/workspace/skills/slack-report-delivery .claude/skills/slack-report-delivery && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "slack-report-delivery" agent skill from https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-delivery into .claude/skills/slack-report-delivery/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "slack-report-delivery", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-deliveryType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install automateyournetwork/netclaw slack-report-delivery --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/automateyournetwork/netclaw.git skills-src && mkdir -p .agents/skills && cp -r skills-src/workspace/skills/slack-report-delivery .agents/skills/slack-report-delivery && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "slack-report-delivery" agent skill from https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-delivery into .agents/skills/slack-report-delivery/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "slack-report-delivery", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install automateyournetwork/netclaw slack-report-delivery --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/automateyournetwork/netclaw.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/workspace/skills/slack-report-delivery .cursor/skills/slack-report-delivery && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "slack-report-delivery" agent skill from https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-delivery into .cursor/skills/slack-report-delivery/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "slack-report-delivery", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/automateyournetwork/netclaw.git --path workspace/skills/slack-report-delivery--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install automateyournetwork/netclaw slack-report-delivery --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/automateyournetwork/netclaw.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/workspace/skills/slack-report-delivery .gemini/skills/slack-report-delivery && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "slack-report-delivery" agent skill from https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-delivery into .gemini/skills/slack-report-delivery/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "slack-report-delivery", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install automateyournetwork/netclaw slack-report-deliveryInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/automateyournetwork/netclaw.git skills-src && mkdir -p .github/skills && cp -r skills-src/workspace/skills/slack-report-delivery .github/skills/slack-report-delivery && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "slack-report-delivery" agent skill from https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-delivery into .github/skills/slack-report-delivery/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "slack-report-delivery", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install automateyournetwork/netclaw slack-report-delivery --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/automateyournetwork/netclaw.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/workspace/skills/slack-report-delivery .opencode/skills/slack-report-delivery && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "slack-report-delivery" agent skill from https://github.com/automateyournetwork/netclaw/tree/main/workspace/skills/slack-report-delivery into .opencode/skills/slack-report-delivery/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "slack-report-delivery", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
slack-report-delivery- GitHub stars
- 676
- Token cost
- ~2.1k tokens
- SKILL.md length
- 365 words
- Files
- 1
- Skills in repo
- 120
- Repo updated
- First seen
- Licence
- Apache-2.0
At a glance
Deliver formatted network reports, audit results, topology diagrams, and compliance documentation to Slack channels with rich Block Kit formatting.
- Works in 6 steps: Health Check Report → Security Audit Report → Topology Discovery Report → …
- Posting a health check report
- SKILL.md covers Slack OAuth Scopes Used, Report Types and Formatting, Scheduled Report Delivery and Formatting Guidelines, plus 2 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Slack Report Delivery is an agent skill from automateyournetwork/netclaw. Deliver formatted network reports, audit results, topology diagrams, and compliance documentation to Slack channels with rich Block Kit formatting. Use when posting a health check report, sharing a security audit, delivering topology diagrams, or sending scheduled network reports to Slack.
Its SKILL.md is about 2.1k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Security, covering Security review and Diagrams. It works with Slack. The repository describes itself as: An AI agent that claws through your network. The licence is Apache-2.0.
When your agent uses it
- Posting a health check report
- Sharing a security audit
- Delivering topology diagrams
- Sending scheduled network reports to Slack
Example prompts
- “/slack-report-delivery”
Workflow steps
6 steps, taken from the step headings in SKILL.md.
What it can do on your machine
Read from SKILL.md and the folder at commit aa90e7d. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Slack Report Delivery loads about 2.1k tokens when it runs. Until then it costs about 78 tokens; SKILL.md has 365 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from automateyournetwork/netclaw at commit aa90e7d, republished under its Apache-2.0 licence (© automateyournetwork). 365 words, ~2,051 tokens.
Download SKILL.mdSave it as
.claude/skills/slack-report-delivery/SKILL.md (or your agent's skills folder).- name
- slack-report-delivery
- description
- Deliver formatted network reports, audit results, topology diagrams, and compliance documentation to Slack channels with rich Block Kit formatting. Use when posting a health check report, sharing a security audit, delivering topology diagrams, or sending scheduled network reports to Slack.
- license
- Apache-2.0
- user-invocable
- true
Slack Report Delivery
Slack OAuth Scopes Used
| Scope | Purpose |
|---|---|
chat:write | Post report messages to channels |
chat:write.customize | Post with "NetClaw Reports" custom identity |
files:write | Attach full reports, diagrams, spreadsheets |
files:read | Reference previously shared reports |
channels:history | Find previous reports for comparison |
pins:read | Check pinned baseline reports |
Report Types and Formatting
1. Health Check Report
Post after running the pyats-health-check skill:
:stethoscope: *Device Health Report — R1*
_2024-02-21 14:00 UTC_
*Device:* C8000V | IOS-XE 17.9.4a | Uptime: 47d 12h
┌──────────────────┬──────────┬─────────────────────────┐
│ Check │ Status │ Details │
├──────────────────┼──────────┼─────────────────────────┤
│ CPU (5min avg) │ :white_check_mark: 12% │ Normal │
│ Memory │ :warning: 78% │ 2.0G / 2.6G — elevated │
│ Interfaces │ :white_check_mark: All up │ 4/4 interfaces up/up │
│ Hardware │ :white_check_mark: OK │ All modules operational │
│ NTP │ :white_check_mark: Synced │ Offset 2ms to 10.0.0.1 │
│ Logs │ :warning: Events │ 3 OSPF adjacency flaps │
│ Connectivity │ :white_check_mark: 100% │ RTT 23ms to 8.8.8.8 │
└──────────────────┴──────────┴─────────────────────────┘
*Overall:* :warning: *WARNING* — 2 items need attention
_Full report in thread →_Thread the detailed per-section output as follow-up messages.
2. Security Audit Report
Post after running the pyats-security skill:
:shield: *Security Audit Report — R1*
_2024-02-21 | IOS-XE 17.9.4a_
*Summary:* 2 CRITICAL | 2 HIGH | 3 MEDIUM | 2 LOW
━━━ *CRITICAL* ━━━
:red_circle: *C-001:* SSHv1 enabled — vulnerable to MITM attacks
> _Remediation:_ `ip ssh version 2`
:red_circle: *C-002:* No VTY access-class — management plane exposed to any source
> _Remediation:_ Apply `access-class MGMT-ACL in` on VTY lines
━━━ *HIGH* ━━━
:orange_circle: *H-001:* No OSPF authentication on Gi1 — route injection risk
:orange_circle: *H-002:* SNMP community 'public' with no source ACL
━━━ *MEDIUM* ━━━
:large_yellow_circle: M-001: No CoPP policy configured
:large_yellow_circle: M-002: HTTP server enabled (ip http server)
:large_yellow_circle: M-003: Console exec-timeout set to 0 0 (no timeout)
_Detailed findings with remediation commands in thread →_3. Topology Discovery Report
Post after running the pyats-topology skill:
:world_map: *Topology Discovery — 2024-02-21*
*Devices Discovered:* 5 | *Links Mapped:* 12
*Discovery Sources:*
• CDP: 8 links (Cisco-to-Cisco)
• LLDP: 3 links (multi-vendor)
• OSPF: 4 routing adjacencies
• BGP: 2 peering sessions
• ARP: 23 L3 neighbors
*Adjacency Table:*R1:Gi1 ←→ R2:Gi1 (10.1.1.0/30, OSPF Area 0) R1:Gi2 ←→ SW1:Gi0/1 (10.1.2.0/24, Access VLAN 10) R2:Gi2 ←→ SW2:Gi0/1 (10.2.1.0/24, Access VLAN 20) R1:Gi3 ←→ ISP:eth0 (203.0.113.0/30, eBGP AS 65000)
_Draw.io diagram link and full topology model in thread →_4. NetBox Reconciliation Report
Post after running the netbox-reconcile skill:
:mag: *NetBox Reconciliation Report — 2024-02-21*
*Scope:* 5 devices | 47 interfaces | 12 cables
┌────────────────┬───────┬─────────────────────────────────┐
│ Category │ Count │ Details │
├────────────────┼───────┼─────────────────────────────────┤
│ :white_check_mark: DOCUMENTED │ 10 │ Links match NetBox │
│ :warning: UNDOCUMENTED │ 1 │ R1:Gi3 ↔ ISP:eth0 (not in NB) │
│ :red_circle: MISSING │ 1 │ NB cable #47 not seen by CDP │
│ :orange_circle: MISMATCH │ 0 │ — │
│ :blue_circle: IP DRIFT │ 2 │ R2:Lo0 differs from NetBox │
└────────────────┴───────┴─────────────────────────────────┘
*Actions Required:*
1. Add R1:Gi3 ↔ ISP:eth0 cable to NetBox
2. Investigate missing NB cable #47 (R2:Gi3 ↔ SW3:Gi0/2)
3. Update R2 Loopback0 IP in NetBox (10.2.2.2 → 10.2.2.3)5. Change Report
Post after running the pyats-config-mgmt skill:
:pencil: *Change Report — R1*
_2024-02-21 14:30 UTC | ServiceNow CR: CHG0012345_
*Change:* Add Loopback99 for OSPF router-id migration
*Config Applied:*interface Loopback99 ip address 99.99.99.99 255.255.255.255 description OSPF-RID-Migration no shutdown
*Verification:* :white_check_mark: *PASSED*
• Routing table: 47 → 48 routes (+1 connected 99.99.99.99/32)
• OSPF neighbors: 2 (FULL) — no change
• Connectivity: 100% to 8.8.8.8 — no change
• New log: %LINEPROTO-5-UPDOWN: Loopback99 up/up
*Rollback:* Not required
*CR Status:* Closed (successful)6. Vulnerability Scan Report
Post after running the nvd-cve skill:
:beetle: *Vulnerability Scan — Fleet Summary*
_2024-02-21 | NVD Database_
┌──────────┬───────────────────┬──────────┬──────┬──────┬────────┐
│ Device │ Software │ CRITICAL │ HIGH │ MED │ Action │
├──────────┼───────────────────┼──────────┼──────┼──────┼────────┤
│ R1 │ IOS-XE 17.9.4a │ 2 │ 3 │ 5 │ :red_circle: URGENT │
│ R2 │ IOS-XE 17.12.1 │ 0 │ 1 │ 2 │ :large_yellow_circle: PLAN │
│ SW1 │ IOS-XE 16.12.4 │ 5 │ 8 │ 12 │ :red_circle: URGENT │
└──────────┴───────────────────┴──────────┴──────┴──────┴────────┘
*Top Exposures:*
:red_circle: CVE-2023-20198 (CVSS 10.0) — Affects R1, SW1 — HTTP server exposed
:red_circle: CVE-2023-20273 (CVSS 7.2) — Affects R1 — Web UI accessible
_Detailed CVE analysis per device in thread →_Scheduled Report Delivery
NetClaw can deliver reports on a schedule when asked:
| Report | Suggested Cadence | Channel |
|---|---|---|
| Fleet health check | Daily 06:00 UTC | #netclaw-reports |
| Security audit | Weekly (Monday) | #netclaw-reports |
| NetBox reconciliation | Weekly (Wednesday) | #netclaw-reports |
| Vulnerability scan | Monthly (1st) | #netclaw-reports |
| Topology validation | Monthly (15th) | #netclaw-reports |
Show full SKILL.md (173 more words)Show less
Formatting Guidelines
- Use emoji sparingly — severity indicators only, not decoration
- Tables for structured data — use monospace blocks for alignment
- Thread long outputs — keep top-level messages concise (< 20 lines)
- Attach files for full reports — text files for detailed output, images for diagrams
- Always include timestamps — UTC, ISO format
- Link to ServiceNow CRs — when changes are involved
- Reference GAIT sessions — for audit trail continuity
- Pin important baselines — use bookmarks for reference reports
Comparison with Previous Reports
When delivering a new report, reference the previous one:
:chart_with_upwards_trend: *Health Trend — R1*
_Compared to last check (2024-02-20 14:00 UTC)_
│ Metric │ Previous │ Current │ Trend │
│ CPU 5min │ 10% │ 12% │ :arrow_right: Stable │
│ Memory │ 71% │ 78% │ :arrow_up: +7% │
│ Interfaces │ 4/4 up │ 4/4 up │ :arrow_right: Stable │
│ Ping RTT │ 21ms │ 23ms │ :arrow_right: Stable │
:warning: Memory trending upward — investigate if continuesFailure Behavior
- On a tool error (timeout, unreachable host, malformed response), report the failure and its error message directly to the user rather than fabricating or guessing at results.
- For a confirmed read-only call, check connectivity and retry once if appropriate. For any call that changes state or sends a message, a timeout does not prove the action failed: inspect current state or delivery status before retrying, preserve the required approval/change gates, and do not repeat an action whose outcome is unknown.
© automateyournetwork, Apache-2.0. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in workspace/skills/slack-report-delivery of automateyournetwork/netclaw.
Open the folder on GitHubat commit aa90e7d
Compare with similar skills
Slack Report Delivery next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Slack Report Delivery this skillautomateyournetwork/netclaw | 676 | — | ~2.1k | Automated safety check: Pass | Apache-2.0 | |
| Security SecretsIgorWarzocha/Opencode-Workflows | 122 | — | ~1.2k | Automated safety check: Notes | None | |
| Xray Pre Auditccashwell/evm-cortex | 131 | — | ~25k | Automated safety check: Pass | MIT | |
| Crypto Protocol Diagramstrailofbits/skills | 7.5k | — | ~4.6k | Automated safety check: Pass | CC-BY-SA-4.0 | |
| Audit Flowzebbern/claude-code-guide | 4.7k | — | ~4.2k | Automated safety check: Pass | MIT | |
| Deepsec Documentation Guidevercel-labs/deepsec | 8.1k | — | ~956 | Automated safety check: Pass | Apache-2.0 |
Similar skills
Xray Pre Audit
ccashwell/evm-cortex
A skill your agent uses when preparing for a security audit, performing reconnaissance on a new codebase, or creating a protocol overview.
- Official
Crypto Protocol Diagrams
trailofbits/skills
Turns a cryptographic protocol's source code, RFC, paper or ProVerif or Tamarin model into a Mermaid sequence diagram annotated with each cryptographic operation.
Audit Flow
zebbern/claude-code-guide
Interactive system flow tracing across CODE, API, AUTH, DATA, NETWORK layers with SQLite persistence and Mermaid export.
- Official
Deepsec Documentation Guide
vercel-labs/deepsec
Points the agent at deepsec's own docs to answer questions about initializing, configuring, resuming, scanning with and extending the vulnerability scanner.
Kubernetes Network Security Audit
kubeshark/kubeshark
Hunts for compromised workloads and malicious traffic in a Kubernetes cluster by sweeping network data through Kubeshark MCP, mapped to MITRE ATT&CK.
More from automateyournetwork/netclaw
All 120 skills in this repoEVE-NG Lab Topology Design
automateyournetwork/netclaw
Entry point for designing EVE-NG network labs: classifies the request, gathers missing requirements, proposes options and validates the resulting topology.
ACI Policy Change Deployment
automateyournetwork/netclaw
Deploys Cisco ACI policy changes only behind an approved ServiceNow Change Request, capturing pre and post-change fault baselines and rolling back automatically on a fault delta.
Cisco ACI Fabric Health Audit
automateyournetwork/netclaw
Runs a phased health audit of a Cisco ACI fabric through MCP tools: node status, links, tenant and policy review, faults and endpoint learning.
Anta Validation
automateyournetwork/netclaw
Validate Arista EOS network state against ANTA's pre-built 208-test catalogue, with structured pass/fail verdicts.
Arista Cvp
automateyournetwork/netclaw
Arista CloudVision Portal (CVP) automation via REST API — device inventory, events, connectivity monitoring, tag management (4 tools).
AWS Cloud Monitoring
automateyournetwork/netclaw
AWS CloudWatch monitoring — metrics, alarms, log queries, VPC flow log analysis, network performance.
Related
Works with
Categories
Questions about Slack Report Delivery
What does Slack Report Delivery do?
Deliver formatted network reports, audit results, topology diagrams, and compliance documentation to Slack channels with rich Block Kit formatting. Slack Report Delivery is an agent skill from automateyournetwork/netclaw. Deliver formatted network reports, audit results, topology diagrams, and compliance documentation to Slack channels with rich Block Kit formatting.
When should I use Slack Report Delivery?
Slack Report Delivery fits situations like: posting a health check report; sharing a security audit; delivering topology diagrams; sending scheduled network reports to Slack.
How do I install Slack Report Delivery in Claude Code?
Run `npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a claude-code`. Or copy the skill folder (workspace/skills/slack-report-delivery in automateyournetwork/netclaw) into .claude/skills/slack-report-delivery in your project. Claude Code loads it when a task matches its description.
How do I install Slack Report Delivery in Codex?
Run `npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a codex`. Or copy the skill folder (workspace/skills/slack-report-delivery in automateyournetwork/netclaw) into .agents/skills/slack-report-delivery in your project. Codex loads it when a task matches its description.
Can I use Slack Report Delivery in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add automateyournetwork/netclaw --skill slack-report-delivery -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/slack-report-delivery, .gemini/skills/slack-report-delivery, .github/skills/slack-report-delivery and .opencode/skills/slack-report-delivery in your project.
What does Slack Report Delivery need to run?
SKILL.md names no scripts, command-line tools or credentials: Slack Report Delivery is instructions for the agent only.
Does Slack Report Delivery access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Slack Report Delivery safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Slack Report Delivery use?
Slack Report Delivery is published under the Apache-2.0 licence (declared in SKILL.md). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Slack Report Delivery use?
About 2.1k tokens (SKILL.md is roughly 8.2k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Slack Report Delivery?
Skills that share tags, products or a category with Slack Report Delivery: Security Secrets (IgorWarzocha/Opencode-Workflows, 122 stars), Xray Pre Audit (ccashwell/evm-cortex, 131 stars), Crypto Protocol Diagrams (trailofbits/skills, 7.5k stars) and Audit Flow (zebbern/claude-code-guide, 4.7k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Slack Report Delivery?
automateyournetwork (a GitHub user) maintains it in automateyournetwork/netclaw, which has 676 GitHub stars. The repository holds 120 skills in this directory. The repository was last updated on October 9, 2026.
Source: automateyournetwork/netclaw on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.