Mac Fleet Maintenance
steipete/agent-scripts
Inventories and maintains a fleet of Macs from a desired-state file: package updates, repo and Xcode sync, and disk, backup and security health reports.
Design a preventive maintenance programme that keeps vehicles legal and out of the workshop at the wrong moment — intervals set by duty cycle, the inspection items that actually cause roadside…
MITAuto-check passed
Install Fleet Maintenance Programme
$ npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install mohitagw15856/pm-claude-skills fleet-maintenance-programme --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/mohitagw15856/pm-claude-skills.git skills-src && mkdir -p .claude/skills && cp -r skills-src/skills/fleet-maintenance-programme .claude/skills/fleet-maintenance-programme && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "fleet-maintenance-programme" agent skill from https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programme into .claude/skills/fleet-maintenance-programme/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "fleet-maintenance-programme", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programmeType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install mohitagw15856/pm-claude-skills fleet-maintenance-programme --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/mohitagw15856/pm-claude-skills.git skills-src && mkdir -p .agents/skills && cp -r skills-src/skills/fleet-maintenance-programme .agents/skills/fleet-maintenance-programme && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "fleet-maintenance-programme" agent skill from https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programme into .agents/skills/fleet-maintenance-programme/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "fleet-maintenance-programme", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install mohitagw15856/pm-claude-skills fleet-maintenance-programme --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/mohitagw15856/pm-claude-skills.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/skills/fleet-maintenance-programme .cursor/skills/fleet-maintenance-programme && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "fleet-maintenance-programme" agent skill from https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programme into .cursor/skills/fleet-maintenance-programme/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "fleet-maintenance-programme", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/mohitagw15856/pm-claude-skills.git --path skills/fleet-maintenance-programme--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install mohitagw15856/pm-claude-skills fleet-maintenance-programme --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/mohitagw15856/pm-claude-skills.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/skills/fleet-maintenance-programme .gemini/skills/fleet-maintenance-programme && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "fleet-maintenance-programme" agent skill from https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programme into .gemini/skills/fleet-maintenance-programme/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "fleet-maintenance-programme", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install mohitagw15856/pm-claude-skills fleet-maintenance-programmeInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/mohitagw15856/pm-claude-skills.git skills-src && mkdir -p .github/skills && cp -r skills-src/skills/fleet-maintenance-programme .github/skills/fleet-maintenance-programme && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "fleet-maintenance-programme" agent skill from https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programme into .github/skills/fleet-maintenance-programme/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "fleet-maintenance-programme", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install mohitagw15856/pm-claude-skills fleet-maintenance-programme --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/mohitagw15856/pm-claude-skills.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/skills/fleet-maintenance-programme .opencode/skills/fleet-maintenance-programme && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "fleet-maintenance-programme" agent skill from https://github.com/mohitagw15856/pm-claude-skills/tree/main/skills/fleet-maintenance-programme into .opencode/skills/fleet-maintenance-programme/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "fleet-maintenance-programme", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
fleet-maintenance-programme- GitHub stars
- 1.4k
- Token cost
- ~1.7k tokens
- SKILL.md length
- 835 words
- Files
- 1
- Skills in repo
- 1,322
- Repo updated
- First seen
- Licence
- MIT
At a glance
Design a preventive maintenance programme that keeps vehicles legal and out of the workshop at the wrong moment — intervals set by duty cycle, the inspection items that actually cause roadside…
- Works in 7 steps: Set intervals by duty cycle, not by… → Use time and distance, whichever comes… → Build the inspection list from your own… → …
- Asked to build a fleet maintenance schedule
- SKILL.md covers What This Skill Produces, Required Inputs, Framework: Intervals by Duty… and Output Format, plus 3 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Fleet Maintenance Programme is an agent skill from mohitagw15856/pm-claude-skills. Design a preventive maintenance programme that keeps vehicles legal and out of the workshop at the wrong moment — intervals set by duty cycle, the inspection items that actually cause roadside failures, and the defect-reporting loop that closes. Use when asked to build a fleet maintenance schedule, set PM intervals, reduce breakdowns or roadside violations, or design a vehicle inspection programme. Produces the interval schedule by duty cycle, the inspection checklists by level, the defect-reporting and…
Its SKILL.md is about 1.7k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
The repository describes itself as: 1255 professional Agent Skills for Claude, ChatGPT, Gemini, Cursor & Codex — PRDs, postmortems, leases, medical bills, layoffs, go-bags, new countries. Plain markdown, MIT, in… The licence is MIT.
When your agent uses it
- Asked to build a fleet maintenance schedule
- Set PM intervals
- Reduce breakdowns
- Roadside violations
Example prompts
- “/fleet-maintenance-programme”
Workflow steps
7 steps, taken from the first numbered list in SKILL.md.
- Set intervals by duty cycle, not by fleet average. Multi-drop brakes and clutches wear on a different clock from trunking. A single…
- Use time and distance, whichever comes first. A low-mileage vehicle still corrodes, and a time-based backstop catches it.
- Build the inspection list from your own failure data. Roadside findings and breakdown causes tell you what to inspect far better than a…
- Make the driver walkaround meaningful. A nil-defect report every day from every driver is evidence the process is not working, not…
- Close the defect loop explicitly. Report → assessed → rectified or deferred with justification → signed off. Every step named and owned…
- Plan downtime against revenue. Schedule inspections when the vehicle would be least productive, not when the workshop is quiet.
- Feed failures back. A component failing repeatedly is an interval or specification problem, not a maintenance one.
What it can do on your machine
Read from SKILL.md and the folder at commit 1cbf1f0. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Fleet Maintenance Programme loads about 1.7k tokens when it runs. Until then it costs about 157 tokens; SKILL.md has 835 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from mohitagw15856/pm-claude-skills at commit 1cbf1f0, republished under its MIT licence (© mohitagw15856). 835 words, ~1,713 tokens.
Download SKILL.mdSave it as
.claude/skills/fleet-maintenance-programme/SKILL.md (or your agent's skills folder).- name
- fleet-maintenance-programme
- description
- Design a preventive maintenance programme that keeps vehicles legal and out of the workshop at the wrong moment — intervals set by duty cycle, the inspection items that actually cause roadside failures, and the defect-reporting loop that closes. Use when asked to build a fleet maintenance schedule, set PM intervals, reduce breakdowns or roadside violations, or design a vehicle inspection programme. Produces the interval schedule by duty cycle, the inspection checklists by level, the defect-reporting and rectification loop, the parts and downtime planning, and the compliance record structure.
Fleet Maintenance Programme
Fleet maintenance fails in two directions: too little and vehicles fail at the roadside, too much and they are in the workshop instead of earning. The programme that works sets intervals by how each vehicle is actually used rather than by a single fleet-wide number, inspects the things that genuinely cause failures, and — the part most programmes get wrong — guarantees that a driver-reported defect reliably becomes a repair.
What This Skill Produces
- An interval schedule by duty cycle — because a local multi-drop vehicle and a trunking unit wear differently
- Inspection checklists by level — daily walkaround, periodic safety inspection, and full service, each with a defined scope
- The defect-reporting loop — from driver report to rectification to sign-off, with the escalation for anything safety-critical
- Parts and downtime planning — what is stocked, and when vehicles come off the road with least revenue impact
- The compliance record structure — what is retained, for how long, and in a form an inspector can follow
- The failure-analysis loop — recurring defects fed back into intervals and specification
Required Inputs
Ask for these if not provided:
- The fleet — vehicle types, ages, mileages, and how each is actually used
- The duty cycles — trunking, multi-drop, off-road, refrigerated, and their loading
- Current position — existing intervals, breakdown history, and any roadside or inspection findings
- The workshop — in-house or contracted, capacity, and lead times for parts
- Your regulatory framework — the inspection frequency, record retention, and roadworthiness duties that apply where you operate
Framework: Intervals by Duty Cycle, Inspections by Failure Data, Defects That Close
- Set intervals by duty cycle, not by fleet average. Multi-drop brakes and clutches wear on a different clock from trunking. A single fleet-wide interval over-services half the fleet and under-services the rest.
- Use time and distance, whichever comes first. A low-mileage vehicle still corrodes, and a time-based backstop catches it.
- Build the inspection list from your own failure data. Roadside findings and breakdown causes tell you what to inspect far better than a generic checklist.
- Make the driver walkaround meaningful. A nil-defect report every day from every driver is evidence the process is not working, not evidence the fleet is perfect.
- Close the defect loop explicitly. Report → assessed → rectified or deferred with justification → signed off. Every step named and owned. Safety-critical defects take the vehicle off the road, and that authority sits with a named role.
- Plan downtime against revenue. Schedule inspections when the vehicle would be least productive, not when the workshop is quiet.
- Feed failures back. A component failing repeatedly is an interval or specification problem, not a maintenance one.
Output Format
Show full SKILL.md (401 more words)Show less
Maintenance programme: [fleet] · [effective date] · v[n]
Fleet profile
| Vehicle group | Count | Duty cycle | Annual distance | Inspection interval | Service interval |
|---|---|---|---|---|---|
| Interval basis: [time or distance, whichever first] · Derived from: [duty cycle, manufacturer schedule, regulatory minimum, own failure data] |
Inspection levels
- Daily walkaround (driver): [items] · reported via [method] · nil-defect rate monitored: [target and what an implausible rate triggers]
- Periodic safety inspection (competent person, every [interval]): [scope] · [documented on what form]
- Full service (every [interval]): [scope]
Defect loop
| Step | Owner | Timescale | Record |
|---|---|---|---|
| Driver reports | Driver | Immediately | [system] |
| Assessed | [role] | [time] | Severity assigned |
| Safety-critical → vehicle off road | [named role with authority] | Immediate | Prohibition record |
| Rectified or deferred | Workshop | [time] | Deferral needs written justification |
| Signed off | [role] | Closed record |
Downtime plan: [when each group comes off the road, and the revenue logic] Parts: stocked [list] · lead-time risks [items]
Records: [what is kept · retention period · where · who can produce it on request]
Failure analysis: reviewed [frequency] · recurring defects → [interval or specification change]
Inspection frequency, competence requirements, record retention and roadworthiness duties are set by regulation and vary by jurisdiction and vehicle class. Verify against the current applicable rules and your operating licence conditions; manufacturer schedules are a minimum, not a compliance position.
Quality Checks
- Intervals differ by duty cycle rather than one fleet-wide number
- Both time and distance triggers are used
- The inspection list is informed by the fleet's own failure and roadside data
- Nil-defect reporting rates are monitored for implausibility
- Every step of the defect loop has a named owner and a timescale
- Authority to take a vehicle off the road sits with a named role
- Deferred defects require written justification
- Recurring failures feed back into intervals or specification
Anti-Patterns
- One interval for the whole fleet. Simultaneously wasteful and unsafe.
- Distance-only triggers. Low-mileage vehicles corrode and go uninspected.
- A generic checklist. Ignores what is actually failing on your vehicles.
- Celebrating a 100% nil-defect rate. It means drivers are not really looking.
- A defect loop with no sign-off. Reports vanish and the record shows compliance.
- Deferring defects without written justification. The finding that turns an audit serious.
- Scheduling maintenance for workshop convenience. Takes vehicles off the road on their best days.
Example Trigger Phrases
- "Design a preventive maintenance schedule for our fleet"
- "How often should we inspect our vehicles?"
- "We keep failing roadside inspections — what should we change?"
- "Our drivers report nil defects every day — is that a problem?"
- "Build a defect reporting process for our fleet"
© mohitagw15856, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in skills/fleet-maintenance-programme of mohitagw15856/pm-claude-skills.
Open the folder on GitHubat commit 1cbf1f0
Compare with similar skills
Fleet Maintenance Programme next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Fleet Maintenance Programme this skillmohitagw15856/pm-claude-skills | 1.4k | — | ~1.7k | Automated safety check: Pass | MIT | |
| Mac Fleet Maintenancesteipete/agent-scripts | 7.3k | — | ~4.8k | Automated safety check: Pass | MIT | |
| Doc Maintenancepaperclipai/paperclip | 99k | — | ~1.1k | Automated safety check: Pass | MIT | |
| Iot Fleetruvnet/ruflo | 74k | — | ~210 | Automated safety check: Pass | MIT | |
| Codewhale Fleet Managercodewhale-hq/Codewhale | 41k | — | ~1.2k | Automated safety check: Pass | MIT | |
| Doc Maintenancepaperclipai/paperclip | 99k | — | ~1.6k | Automated safety check: Pass | MIT |
Similar skills
Doc Maintenance
paperclipai/paperclip
Keep project docs aligned with recent code and feature changes — detect drift, update affected pages, and add release-relevant notes without rewriting unchanged sections.
Iot Fleet
ruvnet/ruflo
Create and manage Cognitum Seed device fleets with firmware policies
Codewhale Fleet Manager
codewhale-hq/Codewhale
Triages and manages Codewhale fleet runs and workers with typed commands, classifying failures and choosing a safe restart, resume or escalation.
Doc Maintenance
paperclipai/paperclip
Audit README, SPEC, and PRODUCT docs against recent git history for drift and make minimal PR-ready edits.
Fleet
asheshgoplani/agent-deck
Fan out a fleet of independent agent-deck child sessions from inside a session and check their progress non-blockingly.
More from mohitagw15856/pm-claude-skills
All 1,322 skills in this repoExit Waterfall
mohitagw15856/pm-claude-skills
Compute who gets what at each exit price from a cap table — liquidation preferences, conversion points, and where the founders' share collapses.
Feature Prioritisation
mohitagw15856/pm-claude-skills
Apply prioritisation frameworks (RICE, MoSCoW, Kano, ICE, Opportunity Scoring) to rank features and backlog items.
Freelance Rate
mohitagw15856/pm-claude-skills
Derive a freelance day/hourly rate backwards from target income, honest billable utilization, overhead, and the self-employment tax premium — the arithmetic that proves a rate is not salary÷2000.
Offer Comparison
mohitagw15856/pm-claude-skills
Compare two or more job offers as total-comp curves over four years — vesting cliffs, bonuses, 401(k) match, and the crossover year computed, not vibed.
Refinance Breakeven
mohitagw15856/pm-claude-skills
Compute the month a refinance actually starts saving money — payment delta, breakeven month, and total interest on both paths including the term-reset trap.
Rent Vs Buy
mohitagw15856/pm-claude-skills
Model rent-vs-buy honestly — year-by-year net position for both paths including the assumption everyone drops (the renter invests the difference), with a breakeven horizon instead of a verdict.
Questions about Fleet Maintenance Programme
What does Fleet Maintenance Programme do?
Design a preventive maintenance programme that keeps vehicles legal and out of the workshop at the wrong moment — intervals set by duty cycle, the inspection items that actually cause roadside…. Fleet Maintenance Programme is an agent skill from mohitagw15856/pm-claude-skills. Design a preventive maintenance programme that keeps vehicles legal and out of the workshop at the wrong moment — intervals set by duty cycle, the inspection items that actually cause roadside failures, and the defect-reporting loop that closes.
When should I use Fleet Maintenance Programme?
Fleet Maintenance Programme fits situations like: asked to build a fleet maintenance schedule; set PM intervals; reduce breakdowns; roadside violations.
How do I install Fleet Maintenance Programme in Claude Code?
Run `npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a claude-code`. Or copy the skill folder (skills/fleet-maintenance-programme in mohitagw15856/pm-claude-skills) into .claude/skills/fleet-maintenance-programme in your project. Claude Code loads it when a task matches its description.
How do I install Fleet Maintenance Programme in Codex?
Run `npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a codex`. Or copy the skill folder (skills/fleet-maintenance-programme in mohitagw15856/pm-claude-skills) into .agents/skills/fleet-maintenance-programme in your project. Codex loads it when a task matches its description.
Can I use Fleet Maintenance Programme in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add mohitagw15856/pm-claude-skills --skill fleet-maintenance-programme -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/fleet-maintenance-programme, .gemini/skills/fleet-maintenance-programme, .github/skills/fleet-maintenance-programme and .opencode/skills/fleet-maintenance-programme in your project.
What does Fleet Maintenance Programme need to run?
SKILL.md names no scripts, command-line tools or credentials: Fleet Maintenance Programme is instructions for the agent only.
Does Fleet Maintenance Programme access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Fleet Maintenance Programme safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Fleet Maintenance Programme use?
Fleet Maintenance Programme is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Fleet Maintenance Programme use?
About 1.7k tokens (SKILL.md is roughly 6.9k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Fleet Maintenance Programme?
Skills that share tags, products or a category with Fleet Maintenance Programme: Mac Fleet Maintenance (steipete/agent-scripts, 7.3k stars), Doc Maintenance (paperclipai/paperclip, 99k stars), Iot Fleet (ruvnet/ruflo, 74k stars) and Codewhale Fleet Manager (codewhale-hq/Codewhale, 41k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Fleet Maintenance Programme?
mohitagw15856 (a GitHub user) maintains it in mohitagw15856/pm-claude-skills, which has 1,431 GitHub stars. The repository holds 1,322 skills in this directory. The repository was last updated on October 7, 2026.
Source: mohitagw15856/pm-claude-skills on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.