Marketing Os
Yuzzyuk/marketing-os
A complete marketing department in one skill. An agent skill from Yuzzyuk/marketing-os.
Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and…
Install Matlab Compute Gnss Position
$ npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install matlab/matlab-agentic-toolkit matlab-compute-gnss-position --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/matlab/matlab-agentic-toolkit.git skills-src && mkdir -p .claude/skills && cp -r skills-src/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position .claude/skills/matlab-compute-gnss-position && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "matlab-compute-gnss-position" agent skill from https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position into .claude/skills/matlab-compute-gnss-position/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "matlab-compute-gnss-position", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-positionType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install matlab/matlab-agentic-toolkit matlab-compute-gnss-position --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/matlab/matlab-agentic-toolkit.git skills-src && mkdir -p .agents/skills && cp -r skills-src/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position .agents/skills/matlab-compute-gnss-position && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "matlab-compute-gnss-position" agent skill from https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position into .agents/skills/matlab-compute-gnss-position/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "matlab-compute-gnss-position", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install matlab/matlab-agentic-toolkit matlab-compute-gnss-position --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/matlab/matlab-agentic-toolkit.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position .cursor/skills/matlab-compute-gnss-position && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "matlab-compute-gnss-position" agent skill from https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position into .cursor/skills/matlab-compute-gnss-position/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "matlab-compute-gnss-position", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/matlab/matlab-agentic-toolkit.git --path skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install matlab/matlab-agentic-toolkit matlab-compute-gnss-position --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/matlab/matlab-agentic-toolkit.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position .gemini/skills/matlab-compute-gnss-position && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "matlab-compute-gnss-position" agent skill from https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position into .gemini/skills/matlab-compute-gnss-position/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "matlab-compute-gnss-position", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install matlab/matlab-agentic-toolkit matlab-compute-gnss-positionInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/matlab/matlab-agentic-toolkit.git skills-src && mkdir -p .github/skills && cp -r skills-src/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position .github/skills/matlab-compute-gnss-position && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "matlab-compute-gnss-position" agent skill from https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position into .github/skills/matlab-compute-gnss-position/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "matlab-compute-gnss-position", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install matlab/matlab-agentic-toolkit matlab-compute-gnss-position --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/matlab/matlab-agentic-toolkit.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position .opencode/skills/matlab-compute-gnss-position && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "matlab-compute-gnss-position" agent skill from https://github.com/matlab/matlab-agentic-toolkit/tree/main/skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position into .opencode/skills/matlab-compute-gnss-position/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "matlab-compute-gnss-position", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
matlab-compute-gnss-position- GitHub stars
- 1.1k
- Token cost
- ~5k tokens
- SKILL.md length
- 1,699 words
- Files
- 2
- Skills in repo
- 151
- Repo updated
- First seen
- Licence
- Custom licence
At a glance
Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and…
- Works in 12 steps: Inspect RINEX files — call rinexinfo on… → Resolve observation codes — confirm… → Gather processing options —… → …
- Processing GNSS data
- SKILL.md covers When to Use, When NOT to Use, Must-Follow Rules and Workflow, plus 8 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Matlab Compute Gnss Position is an agent skill from matlab/matlab-agentic-toolkit. Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions. Filters by constellation, elevation mask, C/N0, and observation code. Reports DOP, scatter RMS, and satellite count. Use when processing GNSS data, computing positions from RINEX files, analyzing accuracy, comparing constellations, or evaluating satellite geometry. Do NOT use for carrier-phase RTK/PPP, IMU…
Its SKILL.md is about 5k tokens, which your agent loads only when the skill is triggered. The skill folder holds 1 other file (for example `manifest.yaml`).
It sits in Marketing & SEO, covering Positioning and messaging. The repository describes itself as: The MATLAB Agentic Toolkit brings proven MATLAB capabilities to AI agents, making engineering and scientific workflows agent-ready.
When your agent uses it
- Processing GNSS data
- Computing positions from RINEX files
- Analyzing accuracy
- Comparing constellations
Example prompts
- “Use the matlab-compute-gnss-position skill to compute multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System…”
- “/matlab-compute-gnss-position”
Workflow steps
12 steps, taken from the first numbered list in SKILL.md.
- Inspect RINEX files — call rinexinfo on each file to confirm v3, identify constellations, and list available observation codes. Use…
- Resolve observation codes — confirm default codes exist in the RINEX data; if not, suggest alternatives from the header
- Gather processing options — constellation selection, elevation mask (degrees, default 10), C/N0 threshold (dB-Hz, default 0), observation…
- Read data — call rinexread for observation and navigation files
- Extract measurements — call gnssmeasurements per constellation with the confirmed observation code; pre-filter observation data to remove…
- Filter by C/N0 — remove rows from observation timetable where signal strength column falls below threshold before calling gnssmeasurements
- Validate constellations — solve each constellation independently first; if any produces wildly wrong positions (>1 km error, extreme…
- Combine constellations — vertically concatenate validated measurement timetables: combinedMeas = [gpsMeas; galMeas; ...]
- Apply elevation mask — compute initial position from one epoch, use lookangles to get satellite elevations, remove satellites below mask
- Solve position — call receiverposition with gnssoptions for atmospheric corrections
- Report metrics — per-epoch (HDOP, VDOP, satellite count) and aggregate (scatter RMS, mean DOP)
- Visualize — skyplot, position time series, DOP and satellite count panels
What it can do on your machine
Read from SKILL.md and the folder at commit 69e71df. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md (its code samples are matlab).
From the folder's file list and the shell code blocks in SKILL.md.
Network
Links to these hosts (documentation or services it may open):
igs.orggeodesy.noaa.gov
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Matlab Compute Gnss Position loads about 5k tokens when it runs. Until then it costs about 149 tokens; SKILL.md has 1,699 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Its licence (Custom licence) doesn't allow us to republish the file, so here is its outline and opening line. It has 1,699 words (~4,990 tokens).
“Pseudorange-based single-point positioning (SPP) from RINEX v3 data. Supports GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC/IRNSS, and SBAS.”
- name
- matlab-compute-gnss-position
- metadata.author
- MathWorks
- metadata.version
- 1.1
- license
- https://www.mathworks.com/content/dam/mathworks/license/pmrl/license.md
Files
SKILL.md and 1 other file in skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position of matlab/matlab-agentic-toolkit.
- SKILL.md
- manifest.yaml
Open the folder on GitHubat commit 69e71df
Compare with similar skills
Matlab Compute Gnss Position next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Matlab Compute Gnss Position this skillmatlab/matlab-agentic-toolkit | 1.1k | — | ~5k | Automated safety check: Pass | Custom licence | |
| Marketing OsYuzzyuk/marketing-os | 538 | — | ~2.5k | Automated safety check: Pass | MIT | |
| Revenue Centric Designheliocosta-dev/revenue-centric-design | 740 | — | ~1.6k | Automated safety check: Pass | Custom licence | |
| Startup Positioningferdinandobons/startup-skill | 1.2k | — | ~4.6k | Automated safety check: Pass | MIT | |
| Stanley Druckenmiller Investmenttradermonty/claude-trading-skills | 3k | 1 repos | ~2k | Automated safety check: Pass | MIT | |
| B2b Playbookweilun88313/B2B-Playbook | 203 | — | ~3.1k | Automated safety check: Pass | Proprietary |
Similar skills
Revenue Centric Design
heliocosta-dev/revenue-centric-design
Playbook for designing SaaS and startup products that convert, retain, and monetize — landing pages & CRO, checkout & forms, onboarding/activation, churn reduction, pricing psychology, dashboards…
Startup Positioning
ferdinandobons/startup-skill
Market positioning strategy using the April Dunford framework, enriched with JTBD discovery, Moore positioning statement, and Neumeier's Onliness Test.
Stanley Druckenmiller Investment
tradermonty/claude-trading-skills
Druckenmiller Strategy Synthesizer - Integrates 8 upstream skill outputs (Market Breadth, Uptrend Analysis, Market Top, Macro Regime, FTD Detector, VCP Screener, Theme Detector, CANSLIM Screener)…
B2b Playbook
weilun88313/B2B-Playbook
Turn B2B marketing work into evidence-aware outputs using market, positioning, demand, account-program, lifecycle, and tool-selection guidance.
Research Brand
onvoyage-ai/gtm-engineer-skills
Researches a company from its URL and produces a Brand DNA file covering positioning, audience, competitors, voice, and messaging.
More from matlab/matlab-agentic-toolkit
All 151 skills in this repoMatlab Analyze Time Frequency Content
matlab/matlab-agentic-toolkit
Perform time-frequency analysis in MATLAB using CWT, STFT, synchrosqueezing, reassignment, wavelet coherence, cross spectrogram, EMD/VMD, multiresolution analysis, and time-frequency filtering.
Matlab Design Radar
matlab/matlab-agentic-toolkit
Launch and control the MATLAB Radar Designer app programmatically via MCP.
Matlab Engineer Tabular Features
matlab/matlab-agentic-toolkit
A skill your agent uses when engineering or selecting the best features for single-response classification or regression in MATLAB, whatever the data's modality — for non-tabular data it routes…
Matlab Enhance Camera Image
matlab/matlab-agentic-toolkit
Read BEFORE troubleshooting or enhancing camera image quality.
Matlab Import External AI Model
matlab/matlab-agentic-toolkit
Import PyTorch, ONNX, or Keras 3 / TensorFlow 2.16+ deep learning models into MATLAB as dlnetwork objects.
Matlab Modernize Daq
matlab/matlab-agentic-toolkit
Port MATLAB Data Acquisition Toolbox code from the discouraged (legacy) session-based interface (daq.createSession, addAnalogInputChannel, startBackground, DataAvailable listeners, queueOutputData…
Related
Categories
Questions about Matlab Compute Gnss Position
What does Matlab Compute Gnss Position do?
Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and…. Matlab Compute Gnss Position is an agent skill from matlab/matlab-agentic-toolkit. Computes multi-constellation Global Positioning System (GPS) or Global Navigation Satellite System (GNSS) positions from RINEX v3 data using rinexread, gnssmeasurements, receiverposition, and gnssoptions.
When should I use Matlab Compute Gnss Position?
Matlab Compute Gnss Position fits situations like: processing GNSS data; computing positions from RINEX files; analyzing accuracy; comparing constellations.
How do I install Matlab Compute Gnss Position in Claude Code?
Run `npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a claude-code`. Or copy the skill folder (skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position in matlab/matlab-agentic-toolkit) into .claude/skills/matlab-compute-gnss-position in your project. Claude Code loads it when a task matches its description.
How do I install Matlab Compute Gnss Position in Codex?
Run `npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a codex`. Or copy the skill folder (skills-catalog/robotics-and-autonomous-systems/matlab-compute-gnss-position in matlab/matlab-agentic-toolkit) into .agents/skills/matlab-compute-gnss-position in your project. Codex loads it when a task matches its description.
Can I use Matlab Compute Gnss Position in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add matlab/matlab-agentic-toolkit --skill matlab-compute-gnss-position -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/matlab-compute-gnss-position, .gemini/skills/matlab-compute-gnss-position, .github/skills/matlab-compute-gnss-position and .opencode/skills/matlab-compute-gnss-position in your project.
What does Matlab Compute Gnss Position need to run?
SKILL.md names no scripts, command-line tools or credentials: Matlab Compute Gnss Position is instructions for the agent only.
Does Matlab Compute Gnss Position access the network?
SKILL.md names 2 domains. As links in the text: igs.org and geodesy.noaa.gov. This is read from the text; nothing was executed.
Is Matlab Compute Gnss Position safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Matlab Compute Gnss Position use?
Matlab Compute Gnss Position has a licence file (the repository's licence) that doesn't match a standard licence. Read it on GitHub before reusing the skill.
How many tokens does Matlab Compute Gnss Position use?
About 5k tokens (SKILL.md is roughly 20k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Matlab Compute Gnss Position?
Skills that share tags, products or a category with Matlab Compute Gnss Position: Marketing Os (Yuzzyuk/marketing-os, 538 stars), Revenue Centric Design (heliocosta-dev/revenue-centric-design, 740 stars), Startup Positioning (ferdinandobons/startup-skill, 1.2k stars) and Stanley Druckenmiller Investment (tradermonty/claude-trading-skills, 3k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Matlab Compute Gnss Position?
matlab (a GitHub organization) maintains it in matlab/matlab-agentic-toolkit, which has 1,144 GitHub stars. The repository holds 151 skills in this directory. The repository was last updated on October 8, 2026.
Source: matlab/matlab-agentic-toolkit on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.