Verify
asgeirtj/system_prompts_leaks
Verify that a code change actually does what it's supposed to by exercising it end-to-end and observing behavior — drive the affected flow, not just tests or typecheck.
This skill should be used when verifying indoor plumbing designs in Taiwan, including water tank capacities, pipe sizing, trap seals, drainage slopes, and ventilation pipes.
Custom licenceAuto-check passed
Install Taiwan Plumbing Design Codes
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB taiwan-plumbing-design-codes --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .claude/skills && cp -r skills-src/'raw/專業複委託/機電系統/taiwan-plumbing-design-codes' .claude/skills/taiwan-plumbing-design-codes && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "taiwan-plumbing-design-codes" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codes into .claude/skills/taiwan-plumbing-design-codes/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "taiwan-plumbing-design-codes", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codesType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB taiwan-plumbing-design-codes --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .agents/skills && cp -r skills-src/'raw/專業複委託/機電系統/taiwan-plumbing-design-codes' .agents/skills/taiwan-plumbing-design-codes && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "taiwan-plumbing-design-codes" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codes into .agents/skills/taiwan-plumbing-design-codes/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "taiwan-plumbing-design-codes", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB taiwan-plumbing-design-codes --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/'raw/專業複委託/機電系統/taiwan-plumbing-design-codes' .cursor/skills/taiwan-plumbing-design-codes && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "taiwan-plumbing-design-codes" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codes into .cursor/skills/taiwan-plumbing-design-codes/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "taiwan-plumbing-design-codes", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git --path 'raw/專業複委託/機電系統/taiwan-plumbing-design-codes'--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB taiwan-plumbing-design-codes --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/'raw/專業複委託/機電系統/taiwan-plumbing-design-codes' .gemini/skills/taiwan-plumbing-design-codes && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "taiwan-plumbing-design-codes" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codes into .gemini/skills/taiwan-plumbing-design-codes/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "taiwan-plumbing-design-codes", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB taiwan-plumbing-design-codesInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .github/skills && cp -r skills-src/'raw/專業複委託/機電系統/taiwan-plumbing-design-codes' .github/skills/taiwan-plumbing-design-codes && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "taiwan-plumbing-design-codes" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codes into .github/skills/taiwan-plumbing-design-codes/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "taiwan-plumbing-design-codes", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB taiwan-plumbing-design-codes --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/'raw/專業複委託/機電系統/taiwan-plumbing-design-codes' .opencode/skills/taiwan-plumbing-design-codes && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "taiwan-plumbing-design-codes" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%B0%88%E6%A5%AD%E8%A4%87%E5%A7%94%E8%A8%97/%E6%A9%9F%E9%9B%BB%E7%B3%BB%E7%B5%B1/taiwan-plumbing-design-codes into .opencode/skills/taiwan-plumbing-design-codes/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "taiwan-plumbing-design-codes", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
taiwan-plumbing-design-codes- GitHub stars
- 158
- Token cost
- ~523 tokens
- SKILL.md length
- 242 words
- Files
- 2
- Skills in repo
- 86
- Repo updated
- First seen
- Licence
- Custom licence
At a glance
This skill should be used when verifying indoor plumbing designs in Taiwan, including water tank capacities, pipe sizing, trap seals, drainage slopes, and ventilation pipes.
- Works in 5 steps: Water Tank Capacity (水箱/水塔容量) → Water Supply Pipe Sizing (給水管徑計算) → Traps & Water Seals (存水彎與水封) → …
- SKILL.md covers Context & Purpose, Design Parameters & Constraints and Execution Logic for AI
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Taiwan Plumbing Design Codes is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. This skill should be used when verifying indoor plumbing designs in Taiwan, including water tank capacities, pipe sizing, trap seals, drainage slopes, and ventilation pipes. Note: overlaps with plumbing-drainage-design-code, which is verified and more complete (WSFU, grease interceptors, 同層排水) — prefer that skill for statutory numbers; use this one only as a quick checklist (給排水快速檢核).
Its SKILL.md is about 520 tokens, which your agent loads only when the skill is triggered. The skill folder holds 1 other file (for example `domain.md`).
The repository describes itself as: 一個開源的台灣AEC產業知識庫，只要你願意共享經驗與知識就歡迎加入我們.
Example prompts
- “/taiwan-plumbing-design-codes”
Workflow steps
5 steps, taken from the step headings in SKILL.md.
- Water Tank Capacity (水箱/水塔容量)
- Water Supply Pipe Sizing (給水管徑計算)
- Traps & Water Seals (存水彎與水封)
- Drainage Pipe Slopes (排水管洩水坡度)
- Vent Pipe Systems (通氣管路)
What it can do on your machine
Read from SKILL.md and the folder at commit 35ed06e. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Taiwan Plumbing Design Codes loads about 523 tokens when it runs. Until then it costs about 104 tokens; SKILL.md has 242 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Its licence (Custom licence) doesn't allow us to republish the file, so here is its outline and opening line. It has 242 words (~523 tokens).
“This skill encodes the Taiwan "Building Water Supply and Drainage Equipment Design Technical Specifications" (建築物給水排水設備設計技術規範). Use it to validate MEP plumbing drawings.”
- name
- taiwan-plumbing-design-codes
- type
- Skill
- metadata.class
- C
Files
SKILL.md and 1 other file in raw/專業複委託/機電系統/taiwan-plumbing-design-codes of h30190/HJPLUS_Taiwan_Architect_KB.
- SKILL.md
- domain.md
Open the folder on GitHubat commit 35ed06e
Compare with similar skills
Taiwan Plumbing Design Codes next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Taiwan Plumbing Design Codes this skillh30190/HJPLUS_Taiwan_Architect_KB | 158 | — | ~523 | Automated safety check: Pass | Custom licence | |
| Verifyasgeirtj/system_prompts_leaks | 69k | — | ~3k | Automated safety check: Pass | CC0-1.0 | |
| Code Reviewflutter/flutter | 180k | — | ~1.4k | Automated safety check: Pass | BSD-3-Clause | |
| Simplify CodeNousResearch/hermes-agent | 252k | — | ~3.7k | Automated safety check: Pass | MIT | |
| Architectural Code ReviewDonchitos/Claude-Code-Game-Studios | 26k | — | ~3.5k | Automated safety check: Pass | MIT | |
| Coding Agentopenclaw/openclaw | 392k | 1 repos | ~2.7k | Automated safety check: Pass | MIT |
Similar skills
Code Review
flutter/flutter
Performs a comprehensive, multi-step code review of pull requests or local code changes, using iterative refinement (generation, critique, synthesis) to ensure high-quality, actionable feedback.
Simplify Code
NousResearch/hermes-agent
Parallel 4-agent cleanup of recent code changes. An agent skill from NousResearch/hermes-agent.
Architectural Code Review
Donchitos/Claude-Code-Game-Studios
Performs an architectural review of code against coding standards, SOLID, testability and performance, and reports no verdict when the inputs are missing.
Coding Agent
openclaw/openclaw
Delegate coding work to Codex, Claude Code, or OpenCode as background workers; not simple edits or read-only code lookup.
Review Code
penpot/penpot
Code review flow — review a diff, PR, or code change, delegating the review to a subagent that follows the code-review-criteria skill.
More from h30190/HJPLUS_Taiwan_Architect_KB
All 86 skills in this repoGreen Material Search Toolkit
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect or consultant needs to search Taiwan's TABC (財團法人臺灣建築中心) green building material certification database, assemble a set of qualified materials for a…
Skill Name Hyphenated
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when [specific trigger scenarios].
Taichung Land Parcel Query
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect receives just an address or lot number (地號) for a site in Taichung City, Taiwan, and needs the land's basic data — zoning, registered land area, land…
Permit Report Data Mapping
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when mapping a legacy CPAMI permit report identifier to its actual BMS data groups, computed display fields, or unresolved template dependencies.
Revit AI Targeting And Safe Execution
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an AI agent, MCP tool, Revit add-in, or automation must inspect or change a live Revit model and needs to prove its target set, choose bounded read-only context…
Smoke Exhaust Review
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when evaluating smoke exhaust compliance for buildings in Taiwan, including windowless floor determination, smoke compartment partitioning, smoke exhaust window effective…
Questions about Taiwan Plumbing Design Codes
What does Taiwan Plumbing Design Codes do?
This skill should be used when verifying indoor plumbing designs in Taiwan, including water tank capacities, pipe sizing, trap seals, drainage slopes, and ventilation pipes. Taiwan Plumbing Design Codes is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. This skill should be used when verifying indoor plumbing designs in Taiwan, including water tank capacities, pipe sizing, trap seals, drainage slopes, and ventilation pipes.
How do I install Taiwan Plumbing Design Codes in Claude Code?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a claude-code`. Or copy the skill folder (raw/專業複委託/機電系統/taiwan-plumbing-design-codes in h30190/HJPLUS_Taiwan_Architect_KB) into .claude/skills/taiwan-plumbing-design-codes in your project. Claude Code loads it when a task matches its description.
How do I install Taiwan Plumbing Design Codes in Codex?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a codex`. Or copy the skill folder (raw/專業複委託/機電系統/taiwan-plumbing-design-codes in h30190/HJPLUS_Taiwan_Architect_KB) into .agents/skills/taiwan-plumbing-design-codes in your project. Codex loads it when a task matches its description.
Can I use Taiwan Plumbing Design Codes in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill taiwan-plumbing-design-codes -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/taiwan-plumbing-design-codes, .gemini/skills/taiwan-plumbing-design-codes, .github/skills/taiwan-plumbing-design-codes and .opencode/skills/taiwan-plumbing-design-codes in your project.
What does Taiwan Plumbing Design Codes need to run?
SKILL.md names no scripts, command-line tools or credentials: Taiwan Plumbing Design Codes is instructions for the agent only.
Does Taiwan Plumbing Design Codes access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Taiwan Plumbing Design Codes safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Taiwan Plumbing Design Codes use?
Taiwan Plumbing Design Codes has a licence file (the repository's licence) that doesn't match a standard licence. Read it on GitHub before reusing the skill.
How many tokens does Taiwan Plumbing Design Codes use?
About 523 tokens (SKILL.md is roughly 2.1k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Taiwan Plumbing Design Codes?
Skills that share tags, products or a category with Taiwan Plumbing Design Codes: Verify (asgeirtj/system_prompts_leaks, 69k stars), Code Review (flutter/flutter, 180k stars), Simplify Code (NousResearch/hermes-agent, 252k stars) and Architectural Code Review (Donchitos/Claude-Code-Game-Studios, 26k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Taiwan Plumbing Design Codes?
h30190 (a GitHub user) maintains it in h30190/HJPLUS_Taiwan_Architect_KB, which has 158 GitHub stars. The repository holds 86 skills in this directory. The repository was last updated on October 8, 2026.
Source: h30190/HJPLUS_Taiwan_Architect_KB on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.