Web Interface Guidelines Reviewer
vercel-labs/openreview
Review UI code for Web Interface Guidelines compliance. Use when asked to "review my UI", "check accessibility", "audit design", "review UX", or "check my…
A skill your agent uses when determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan.
Install Accessible Elevator Shaft Dimensions
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB accessible-elevator-shaft-dimensions --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .claude/skills && cp -r skills-src/'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions' .claude/skills/accessible-elevator-shaft-dimensions && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "accessible-elevator-shaft-dimensions" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensions into .claude/skills/accessible-elevator-shaft-dimensions/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "accessible-elevator-shaft-dimensions", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensionsType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB accessible-elevator-shaft-dimensions --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .agents/skills && cp -r skills-src/'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions' .agents/skills/accessible-elevator-shaft-dimensions && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "accessible-elevator-shaft-dimensions" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensions into .agents/skills/accessible-elevator-shaft-dimensions/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "accessible-elevator-shaft-dimensions", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB accessible-elevator-shaft-dimensions --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions' .cursor/skills/accessible-elevator-shaft-dimensions && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "accessible-elevator-shaft-dimensions" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensions into .cursor/skills/accessible-elevator-shaft-dimensions/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "accessible-elevator-shaft-dimensions", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git --path 'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions'--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB accessible-elevator-shaft-dimensions --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions' .gemini/skills/accessible-elevator-shaft-dimensions && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "accessible-elevator-shaft-dimensions" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensions into .gemini/skills/accessible-elevator-shaft-dimensions/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "accessible-elevator-shaft-dimensions", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB accessible-elevator-shaft-dimensionsInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .github/skills && cp -r skills-src/'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions' .github/skills/accessible-elevator-shaft-dimensions && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "accessible-elevator-shaft-dimensions" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensions into .github/skills/accessible-elevator-shaft-dimensions/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "accessible-elevator-shaft-dimensions", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB accessible-elevator-shaft-dimensions --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/'raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions' .opencode/skills/accessible-elevator-shaft-dimensions && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "accessible-elevator-shaft-dimensions" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%B3%95%E8%A6%8F/%E7%84%A1%E9%9A%9C%E7%A4%99%E8%A8%AD%E8%A8%88/%E7%84%A1%E9%9A%9C%E7%A4%99%E9%9B%BB%E6%A2%AF%E6%A9%9F%E9%81%93%E5%B0%BA%E5%AF%B8%E5%B0%8D%E6%87%89/accessible-elevator-shaft-dimensions into .opencode/skills/accessible-elevator-shaft-dimensions/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "accessible-elevator-shaft-dimensions", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
accessible-elevator-shaft-dimensions- GitHub stars
- 158
- Token cost
- ~1.4k tokens
- SKILL.md length
- 645 words
- Files
- 1
- Skills in repo
- 86
- Repo updated
- First seen
- Licence
- Custom licence
At a glance
A skill your agent uses when determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan.
- Determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan
- SKILL.md covers Overview, Regulatory Basis, Core Principle: Code Measures… and Shaft Dimension Table —…, plus 5 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
- Words: 無障礙電梯、機道尺寸、車廂深度
What it does
Accessible Elevator Shaft Dimensions is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. Use when determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan. Covers Taiwan Accessible Facilities Design Specification §406.1: general buildings (door clear width ≥ 90 cm, car depth ≥ 135 cm) and the H-2 residential proviso (door clear width ≥ 80 cm, car depth ≥ 125 cm). Provides pre-verified shaft dimension lookup tables for Mitsubishi, Yung Ta, and Chung Yu elevators (P8–P13), eliminating the need to cross-reference manufacturer spec sheets during floor…
Its SKILL.md is about 1.4k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Frontend & Design, covering Accessibility. The repository describes itself as: 一個開源的台灣AEC產業知識庫，只要你願意共享經驗與知識就歡迎加入我們.
When your agent uses it
- Determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan
- Words: 無障礙電梯、機道尺寸、車廂深度
Example prompts
- “/accessible-elevator-shaft-dimensions”
What it can do on your machine
Read from SKILL.md and the folder at commit 35ed06e. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
Links to these hosts (documentation or services it may open):
glrs.moi.gov.tw
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Accessible Elevator Shaft Dimensions loads about 1.4k tokens when it runs. Until then it costs about 166 tokens; SKILL.md has 645 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Its licence (Custom licence) doesn't allow us to republish the file, so here is its outline and opening line. It has 645 words (~1,443 tokens).
“Taiwan's accessibility code specifies car interior dimensions; building plans must show elevator shaft (hoistway) clear dimensions. The mapping between the two depends on the manufacturer, capacity, and door type.”
- name
- accessible-elevator-shaft-dimensions
- type
- Skill
- metadata.class
- C
Files
Just SKILL.md in raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions of h30190/HJPLUS_Taiwan_Architect_KB.
Open the folder on GitHubat commit 35ed06e
Compare with similar skills
Accessible Elevator Shaft Dimensions next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Accessible Elevator Shaft Dimensions this skillh30190/HJPLUS_Taiwan_Architect_KB | 158 | — | ~1.4k | Automated safety check: Pass | Custom licence | |
| Web Interface Guidelines Reviewervercel-labs/openreview | 1.7k | 97 repos | ~308 | Automated safety check: Pass | None | |
| Accessibility Reviewmarkmead/hyperui | 12k | 1 repos | ~1.1k | Automated safety check: Pass | MIT | |
| Web Animation DesignbaptisteArno/typebot.io | 11k | 2 repos | ~2.7k | Automated safety check: Pass | Custom licence | |
| Accessibility Fixeribelick/ui-skills | 9.5k | 4 repos | ~1.2k | Automated safety check: Pass | MIT | |
| Wcag Audit PatternsvmDeshpande/ai-agent-automation | 178 | 11 repos | ~610 | Automated safety check: Pass | Apache-2.0 |
Similar skills
- Official
Accessibility Review
markmead/hyperui
Run a WCAG 2.1 AA accessibility audit on a design or page. An agent skill from markmead/hyperui.
Web Animation Design
baptisteArno/typebot.io
Guides easing, timing and animation choices for UI motion, based on a web animation course, and reviews existing animations in a before-and-after table.
Accessibility Fixer
ibelick/ui-skills
Audits and fixes HTML accessibility problems such as ARIA labels, keyboard navigation, focus management, contrast and form errors with minimal changes.
Wcag Audit Patterns
vmDeshpande/ai-agent-automation
Conduct WCAG 2.2 accessibility audits with automated testing, manual verification, and remediation guidance.
Baseline UI
ibelick/ui-skills
Applies a fixed set of UI rules for stack, components, interaction, animation, typography and layout, or reviews a file against them with concrete fixes.
More from h30190/HJPLUS_Taiwan_Architect_KB
All 86 skills in this repoGreen Material Search Toolkit
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect or consultant needs to search Taiwan's TABC (財團法人臺灣建築中心) green building material certification database, assemble a set of qualified materials for a…
Skill Name Hyphenated
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when [specific trigger scenarios].
Taichung Land Parcel Query
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect receives just an address or lot number (地號) for a site in Taichung City, Taiwan, and needs the land's basic data — zoning, registered land area, land…
Permit Report Data Mapping
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when mapping a legacy CPAMI permit report identifier to its actual BMS data groups, computed display fields, or unresolved template dependencies.
Revit AI Targeting And Safe Execution
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an AI agent, MCP tool, Revit add-in, or automation must inspect or change a live Revit model and needs to prove its target set, choose bounded read-only context…
Smoke Exhaust Review
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when evaluating smoke exhaust compliance for buildings in Taiwan, including windowless floor determination, smoke compartment partitioning, smoke exhaust window effective…
Related
Categories
Questions about Accessible Elevator Shaft Dimensions
What does Accessible Elevator Shaft Dimensions do?
A skill your agent uses when determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan. Accessible Elevator Shaft Dimensions is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. Use when determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan.
When should I use Accessible Elevator Shaft Dimensions?
Accessible Elevator Shaft Dimensions fits situations like: determining the minimum elevator shaft (hoistway) dimensions required for accessibility compliance in Taiwan; words: 無障礙電梯、機道尺寸、車廂深度.
How do I install Accessible Elevator Shaft Dimensions in Claude Code?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a claude-code`. Or copy the skill folder (raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions in h30190/HJPLUS_Taiwan_Architect_KB) into .claude/skills/accessible-elevator-shaft-dimensions in your project. Claude Code loads it when a task matches its description.
How do I install Accessible Elevator Shaft Dimensions in Codex?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a codex`. Or copy the skill folder (raw/建築法規/無障礙設計/無障礙電梯機道尺寸對應/accessible-elevator-shaft-dimensions in h30190/HJPLUS_Taiwan_Architect_KB) into .agents/skills/accessible-elevator-shaft-dimensions in your project. Codex loads it when a task matches its description.
Can I use Accessible Elevator Shaft Dimensions in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill accessible-elevator-shaft-dimensions -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/accessible-elevator-shaft-dimensions, .gemini/skills/accessible-elevator-shaft-dimensions, .github/skills/accessible-elevator-shaft-dimensions and .opencode/skills/accessible-elevator-shaft-dimensions in your project.
What does Accessible Elevator Shaft Dimensions need to run?
SKILL.md names no scripts, command-line tools or credentials: Accessible Elevator Shaft Dimensions is instructions for the agent only.
Does Accessible Elevator Shaft Dimensions access the network?
SKILL.md names 1 domain. As links in the text: glrs.moi.gov.tw. This is read from the text; nothing was executed.
Is Accessible Elevator Shaft Dimensions safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Accessible Elevator Shaft Dimensions use?
Accessible Elevator Shaft Dimensions has a licence file (the repository's licence) that doesn't match a standard licence. Read it on GitHub before reusing the skill.
How many tokens does Accessible Elevator Shaft Dimensions use?
About 1.4k tokens (SKILL.md is roughly 5.8k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Accessible Elevator Shaft Dimensions?
Skills that share tags, products or a category with Accessible Elevator Shaft Dimensions: Web Interface Guidelines Reviewer (vercel-labs/openreview, 1.7k stars), Accessibility Review (markmead/hyperui, 12k stars), Web Animation Design (baptisteArno/typebot.io, 11k stars) and Accessibility Fixer (ibelick/ui-skills, 9.5k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Accessible Elevator Shaft Dimensions?
h30190 (a GitHub user) maintains it in h30190/HJPLUS_Taiwan_Architect_KB, which has 158 GitHub stars. The repository holds 86 skills in this directory. The repository was last updated on October 8, 2026.
Source: h30190/HJPLUS_Taiwan_Architect_KB on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.