Structured Data
thedaviddias/Front-End-Checklist
A skill your agent uses when auditing metadata, crawlability, structured data, or indexability related to Add structured data markup.
Apply forces and pressures to structures. An agent skill from Cai-aa/CAE-Agent-Hub.
MITAuto-check passed
Install Abaqus Load
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-load --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .claude/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-load .claude/skills/abaqus-load && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "abaqus-load" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-load into .claude/skills/abaqus-load/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-load", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-loadType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-load --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .agents/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-load .agents/skills/abaqus-load && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "abaqus-load" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-load into .agents/skills/abaqus-load/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-load", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-load --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-load .cursor/skills/abaqus-load && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "abaqus-load" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-load into .cursor/skills/abaqus-load/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-load", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/Cai-aa/CAE-Agent-Hub.git --path Skill/abaqus/setup/abaqus-load--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-load --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-load .gemini/skills/abaqus-load && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "abaqus-load" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-load into .gemini/skills/abaqus-load/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-load", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-loadInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .github/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-load .github/skills/abaqus-load && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "abaqus-load" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-load into .github/skills/abaqus-load/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-load", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-load --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-load .opencode/skills/abaqus-load && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "abaqus-load" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-load into .opencode/skills/abaqus-load/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-load", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
abaqus-load- GitHub stars
- 1k
- Token cost
- ~1.2k tokens
- SKILL.md length
- 486 words
- Files
- 4
- Skills in repo
- 57
- Repo updated
- First seen
- Licence
- MIT
At a glance
Apply forces and pressures to structures. An agent skill from Cai-aa/CAE-Agent-Hub.
- Works in 2 steps: Which Load Type? → When to Convert Force to Traction
- User asks to apply a force
- SKILL.md covers When to Use This Skill, Key Decisions, Sign Conventions and What to Ask User, plus 7 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Abaqus Load is an agent skill from Cai-aa/CAE-Agent-Hub. Apply forces and pressures to structures. Use when user asks to apply a force, add pressure, put a load on, or mentions gravity, point loads, or distributed forces.
Its SKILL.md is about 1.2k tokens, which your agent loads only when the skill is triggered. The skill folder holds 3 other files (for example `UPSTREAM.md` and `metadata.json`).
The licence is MIT.
When your agent uses it
- User asks to apply a force
- Mentions gravity
- Distributed forces
Example prompts
- “/abaqus-load”
Requirements
- Pre-approved tools (allowed-tools): Read, Write, Edit, Glob, Grep, Bash(abaqus:*)
Workflow steps
2 steps, taken from the step headings in SKILL.md.
What it can do on your machine
Read from SKILL.md and the folder at commit 194ef49. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves these tools, so the agent can use them without asking each time:
ReadWriteEditGlobGrepBash(abaqus:*)
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Abaqus Load loads about 1.2k tokens when it runs. Until then it costs about 44 tokens; SKILL.md has 486 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from Cai-aa/CAE-Agent-Hub at commit 194ef49, republished under its MIT licence (© Cai-aa). 486 words, ~1,173 tokens.
Download SKILL.mdSave it as
.claude/skills/abaqus-load/SKILL.md (or your agent's skills folder). This skill also uses 3 other files; get the full folder from GitHub.- name
- abaqus-load
- description
- Apply forces and pressures to structures. Use when user asks to apply a force, add pressure, put a load on, or mentions gravity, point loads, or distributed forces.
- allowed-tools
- Read, Write, Edit, Glob, Grep, Bash(abaqus:*)
Abaqus Load Skill
Apply mechanical and thermal loads to FEA models - forces, pressures, gravity, and heat flux.
When to Use This Skill
Route here when user mentions:
- "Apply a force", "add pressure", "put a load on"
- "Gravity", "self-weight", "body force"
- "Point load", "distributed load", "traction"
- "Heat flux", "thermal load"
- "Force in the X/Y/Z direction"
Route elsewhere:
- Fixed supports, displacements, symmetry →
/abaqus-bc - Contact forces between parts →
/abaqus-interaction - Initial temperature fields, pre-stress →
/abaqus-field - Time-varying load profiles →
/abaqus-amplitude
Key Decisions
1. Which Load Type?
| User Describes | Load Type | Units |
|---|---|---|
| Force at a point/vertex | ConcentratedForce | N |
| Force spread over surface | SurfaceTraction | MPa |
| Normal pressure on surface | Pressure | MPa |
| Force along edge | LineLoad | N/mm |
| Self-weight, acceleration | Gravity | mm/s² |
| Heat input to surface | SurfaceHeatFlux | mW/mm² |
| Convective cooling/heating | FilmCondition | mW/(mm²·K) |
2. When to Convert Force to Traction
If user gives total force but it must be distributed:
Traction (MPa) = Total Force (N) / Surface Area (mm²)Example: 1000 N on a 50×20mm face = 1000 / 1000 = 1.0 MPa
Sign Conventions
| Load Type | Positive (+) | Negative (-) |
|---|---|---|
| Pressure | Compression (into surface) | Tension (away from surface) |
| Force components (cf1, cf2, cf3) | Positive axis direction | Negative axis direction |
| Gravity | Positive axis acceleration | Negative axis (comp2=-9810 for -Y) |
What to Ask User
If not specified, clarify:
| Question | Why It Matters |
|---|---|
| Force magnitude? | Required for all loads |
| Direction (X, Y, Z)? | Needed for directional loads |
| Point or distributed? | Determines ConcentratedForce vs SurfaceTraction |
| Which surface/vertex? | Defines load application region |
| Constant or time-varying? | May need amplitude definition |
Direction Specification
| Load Type | How Direction Works |
|---|---|
| ConcentratedForce | cf1, cf2, cf3 = X, Y, Z components |
| SurfaceTraction | directionVector=((origin), (endpoint)) |
| Pressure | Always normal to surface (no direction needed) |
| Gravity | comp1, comp2, comp3 = acceleration components |
| LineLoad | comp1, comp2, comp3 = force/length components |
Common Scenarios
Standard Gravity Setup
- Acceleration: comp2 = -9810 mm/s² (for -Y direction)
- Requires material density defined - without it, gravity has no effect
Show full SKILL.md (195 more words)Show less
Pressure vs Traction
- Pressure: Always normal to surface, simpler to define
- Traction: Arbitrary direction, use when force isn't perpendicular
Thermal Loads
- Heat flux: Direct heat input (mW/mm²)
- Film condition: Convection with ambient temperature
Time-Varying Loads
For loads that change over time:
- First define amplitude using
/abaqus-amplitude - Reference amplitude name when creating load
Modifying Loads Across Steps
| Action | Method |
|---|---|
| Change magnitude | setValuesInStep() |
| Turn off load | deactivate() |
| Different load in each step | Create load with step name |
Troubleshooting
| Problem | Likely Cause | Solution |
|---|---|---|
| Zero reaction forces | Wrong direction or tiny magnitude | Check direction vector and units |
| Gravity has no effect | Missing density | Add density to material definition |
| Load region not found | Typo in set/surface name | Verify name matches exactly |
| Equilibrium not achieved | Load too large | Reduce magnitude or improve convergence |
| Negative eigenvalue | Structure unstable | Check BCs provide adequate support |
Validation Checklist
Before running analysis:
- Load applied to correct region (surface, vertex, edge)
- Direction matches physical scenario
- Magnitude in correct units (N, MPa, mW/mm²)
- Load assigned to correct step (not Initial)
- Density defined if using gravity
- Reactions should balance applied loads
Code Patterns
For API syntax and implementation examples, see:
© Cai-aa, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
SKILL.md and 3 other files in Skill/abaqus/setup/abaqus-load of Cai-aa/CAE-Agent-Hub.
- SKILL.md
- UPSTREAM.md
- UPSTREAM_LICENSE
- metadata.json
Open the folder on GitHubat commit 194ef49
Compare with similar skills
Abaqus Load next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Abaqus Load this skillCai-aa/CAE-Agent-Hub | 1k | — | ~1.2k | Automated safety check: Pass | MIT | |
| Structured Datathedaviddias/Front-End-Checklist | 74k | — | ~420 | Automated safety check: Pass | MIT | |
| Bio Structural Biology Modern Structure PredictionFreedomIntelligence/OpenClaw-Medical-Skills | 3.1k | 1 repos | ~2.5k | Automated safety check: Pass | None | |
| List Structurethedaviddias/Front-End-Checklist | 74k | — | ~438 | Automated safety check: Pass | MIT | |
| Bio Structural Biology Structure IoGPTomics/bioSkills | 1.2k | 1 repos | ~4k | Automated safety check: Pass | MIT | |
| Bio Structural Biology Structure NavigationGPTomics/bioSkills | 1.2k | 1 repos | ~3.7k | Automated safety check: Pass | MIT |
Similar skills
Bio Structural Biology Modern Structure Prediction
FreedomIntelligence/OpenClaw-Medical-Skills
Predict protein structures using modern ML models including AlphaFold3, ESMFold, Chai-1, and Boltz-1.
List Structure
thedaviddias/Front-End-Checklist
A skill your agent uses when reviewing rendered HTML, interactive components, or design-system patterns related to Use correct list structure.
Bio Structural Biology Structure Io
GPTomics/bioSkills
Reads, writes, downloads, and converts macromolecular structures with Biopython Bio.PDB.
Bio Structural Biology Structure Navigation
GPTomics/bioSkills
Navigate the Bio.PDB SMCRA hierarchy (Structure-Model-Chain-Residue-Atom) safely, surfacing the heterogeneity it hides by default.
Bio Structural Biology Structure Preparation
GPTomics/bioSkills
Prepares a deposited or predicted structure for docking, molecular dynamics, or electrostatics by adding hydrogens, assigning protonation and tautomer states, and filling missing atoms and short…
More from Cai-aa/CAE-Agent-Hub
All 57 skills in this repoAnsys Structural Workbench
Cai-aa/CAE-Agent-Hub
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and…
Cylinder O Grid
Cai-aa/CAE-Agent-Hub
Plan, create, adapt, and quality-audit coin-style five-block O-grid hexahedral meshes for cylindrical CAE models.
Comsol Motor Nvh Evidence
Cai-aa/CAE-Agent-Hub
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH.
Aedt Evidence Electromagnetics
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Electronics Desktop and PyAEDT automation for Maxwell, HFSS, Q3D, Icepak, and related electromagnetic workflows.
Ansys Mechanical Evidence Structural
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Mechanical structural automation through Workbench RunWB2 journals, Mechanical Scripting/ACT ExtAPI, or PyMechanical gRPC.
Run Fluent Autoclave
Cai-aa/CAE-Agent-Hub
Run, diagnose, reproduce, and validate ANSYS Fluent CFD simulations of forced-convection autoclaves using Fluent MCP or PyFluent.
Questions about Abaqus Load
What does Abaqus Load do?
Apply forces and pressures to structures. An agent skill from Cai-aa/CAE-Agent-Hub. Abaqus Load is an agent skill from Cai-aa/CAE-Agent-Hub. Apply forces and pressures to structures.
When should I use Abaqus Load?
Abaqus Load fits situations like: user asks to apply a force; mentions gravity; distributed forces.
How do I install Abaqus Load in Claude Code?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a claude-code`. Or copy the skill folder (Skill/abaqus/setup/abaqus-load in Cai-aa/CAE-Agent-Hub) into .claude/skills/abaqus-load in your project. Claude Code loads it when a task matches its description.
How do I install Abaqus Load in Codex?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a codex`. Or copy the skill folder (Skill/abaqus/setup/abaqus-load in Cai-aa/CAE-Agent-Hub) into .agents/skills/abaqus-load in your project. Codex loads it when a task matches its description.
Can I use Abaqus Load in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-load -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/abaqus-load, .gemini/skills/abaqus-load, .github/skills/abaqus-load and .opencode/skills/abaqus-load in your project.
What does Abaqus Load need to run?
SKILL.md names no scripts, command-line tools or credentials: Abaqus Load is instructions for the agent only. Its frontmatter pre-approves these tools: Read, Write, Edit, Glob, Grep, Bash(abaqus:*).
Does Abaqus Load access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Abaqus Load safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Abaqus Load use?
Abaqus Load is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Abaqus Load use?
About 1.2k tokens (SKILL.md is roughly 4.7k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Abaqus Load?
Skills that share tags, products or a category with Abaqus Load: Structured Data (thedaviddias/Front-End-Checklist, 74k stars), Bio Structural Biology Modern Structure Prediction (FreedomIntelligence/OpenClaw-Medical-Skills, 3.1k stars), List Structure (thedaviddias/Front-End-Checklist, 74k stars) and Bio Structural Biology Structure Io (GPTomics/bioSkills, 1.2k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Abaqus Load?
Cai-aa (a GitHub user) maintains it in Cai-aa/CAE-Agent-Hub, which has 1,003 GitHub stars. The repository holds 57 skills in this directory. The repository was last updated on September 30, 2026.
Source: Cai-aa/CAE-Agent-Hub on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.