Agent skill

Juicebox V6

Build, inspect, configure, and safely transact with Juicebox V6 projects, terminals, rulesets, hooks, tiered NFTs, Revnets, Croptop, Bendystraw, and omnichain deployments.

MITAuto-check passedBusiness, Finance & HR

Install Juicebox V6

skills CLI

$ npx skills add BankrBot/skills --skill juicebox-v6 -a claude-code

Project install by default; add -g for ~/.claude/skills/.

GitHub CLI

$ gh skill install BankrBot/skills juicebox-v6 --agent claude-code

Project scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).

Manual copy

$ git clone --depth 1 https://github.com/BankrBot/skills.git skills-src && mkdir -p .claude/skills && cp -r skills-src/juicebox-v6 .claude/skills/juicebox-v6 && rm -rf skills-src

Use ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.

Claude Code skills documentation · loads skills from .claude/skills/

Paste into Claude Code

Install the "juicebox-v6" agent skill from https://github.com/BankrBot/skills/tree/main/juicebox-v6 into .claude/skills/juicebox-v6/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "juicebox-v6", then confirm the skill loads.

Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

$skill-installer

$skill-installer install https://github.com/BankrBot/skills/tree/main/juicebox-v6

Type this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.

skills CLI

$ npx skills add BankrBot/skills --skill juicebox-v6 -a codex

Project install goes to .agents/skills/; add -g for ~/.codex/skills/.

GitHub CLI

$ gh skill install BankrBot/skills juicebox-v6 --agent codex

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/BankrBot/skills.git skills-src && mkdir -p .agents/skills && cp -r skills-src/juicebox-v6 .agents/skills/juicebox-v6 && rm -rf skills-src

Use ~/.agents/skills/ instead of .agents/skills for a personal install.

Codex skills documentation · loads skills from .agents/skills/

Paste into Codex

Install the "juicebox-v6" agent skill from https://github.com/BankrBot/skills/tree/main/juicebox-v6 into .agents/skills/juicebox-v6/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "juicebox-v6", then confirm the skill loads.

Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

skills CLI

$ npx skills add BankrBot/skills --skill juicebox-v6 -a cursor

Project install goes to .agents/skills/; add -g for ~/.cursor/skills/.

GitHub CLI

$ gh skill install BankrBot/skills juicebox-v6 --agent cursor

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/BankrBot/skills.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/juicebox-v6 .cursor/skills/juicebox-v6 && rm -rf skills-src

Use ~/.cursor/skills/ instead of .cursor/skills for a personal install.

Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/

Paste into Cursor

Install the "juicebox-v6" agent skill from https://github.com/BankrBot/skills/tree/main/juicebox-v6 into .cursor/skills/juicebox-v6/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "juicebox-v6", then confirm the skill loads.

Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

gemini skills install

$ gemini skills install https://github.com/BankrBot/skills.git --path juicebox-v6

--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.

skills CLI

$ npx skills add BankrBot/skills --skill juicebox-v6 -a gemini-cli

Project install goes to .agents/skills/; add -g for ~/.gemini/skills/.

GitHub CLI

$ gh skill install BankrBot/skills juicebox-v6 --agent gemini-cli

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/BankrBot/skills.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/juicebox-v6 .gemini/skills/juicebox-v6 && rm -rf skills-src

Use ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.

Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/

Paste into Gemini CLI

Install the "juicebox-v6" agent skill from https://github.com/BankrBot/skills/tree/main/juicebox-v6 into .gemini/skills/juicebox-v6/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "juicebox-v6", then confirm the skill loads.

Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

GitHub CLI

$ gh skill install BankrBot/skills juicebox-v6

Installs for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).

skills CLI

$ npx skills add BankrBot/skills --skill juicebox-v6 -a github-copilot

Project install goes to .agents/skills/; add -g for ~/.copilot/skills/.

Manual copy

$ git clone --depth 1 https://github.com/BankrBot/skills.git skills-src && mkdir -p .github/skills && cp -r skills-src/juicebox-v6 .github/skills/juicebox-v6 && rm -rf skills-src

Use ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.

GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/

Paste into GitHub Copilot

Install the "juicebox-v6" agent skill from https://github.com/BankrBot/skills/tree/main/juicebox-v6 into .github/skills/juicebox-v6/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "juicebox-v6", then confirm the skill loads.

GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

skills CLI

$ npx skills add BankrBot/skills --skill juicebox-v6 -a opencode

OpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.

GitHub CLI

$ gh skill install BankrBot/skills juicebox-v6 --agent opencode

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/BankrBot/skills.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/juicebox-v6 .opencode/skills/juicebox-v6 && rm -rf skills-src

Use ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.

OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/

Paste into OpenCode

Install the "juicebox-v6" agent skill from https://github.com/BankrBot/skills/tree/main/juicebox-v6 into .opencode/skills/juicebox-v6/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "juicebox-v6", then confirm the skill loads.

OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

Facts

Skill name: juicebox-v6
GitHub stars: 1.2k
Token cost: ~1.5k tokens
SKILL.md length: 618 words
Files: 102 (incl. scripts, references)
Skills in repo: 106
Repo updated: Oct 10, 2026
First seen: Oct 7, 2026
Licence: MIT

At a glance

Build, inspect, configure, and safely transact with Juicebox V6 projects, terminals, rulesets, hooks, tiered NFTs, Revnets, Croptop, Bendystraw, and omnichain deployments.

Works in 9 steps: Resolve chain, project ID, token, and… → Use references/shared/chain-config.json… → Use references/shared/abis/.json for… → …
Juicebox protocol questions
SKILL.md covers Operating rules, Module routing, Frontend dependency boundary and UI module adaptation, plus 1 more section
Contract addresses

What it does

Juicebox V6 is an agent skill from BankrBot/skills. Build, inspect, configure, and safely transact with Juicebox V6 projects, terminals, rulesets, hooks, tiered NFTs, Revnets, Croptop, Bendystraw, and omnichain deployments. Use for Juicebox protocol questions, contract addresses or ABIs, project creation, payments, cash-outs, tokenomics, hooks, NFT tiers, cross-chain bridges, loan queries, transaction decoding, and Juicebox app/UI development on Ethereum, Optimism, Base, Arbitrum, or their Sepolia testnets.

Its SKILL.md is about 1.5k tokens, which your agent loads only when the skill is triggered. The skill folder holds 103 other files, including scripts and reference files (for example `catalog.json`, `references/deployment-verification.md` and `references/frontend-security.md`).

It sits in Business, Finance & HR, covering Crypto and DeFi analysis and Deployment. It works with Arbitrum and Ethereum. The repository describes itself as: Bankr Skills equip builders with plug-and-play tools to build more powerful agents. The licence is MIT.

When your agent uses it

Juicebox protocol questions
Contract addresses
Project creation
Cross-chain bridges

Example prompts

“/juicebox-v6”

Workflow steps

9 steps, taken from the first numbered list in SKILL.md.

Resolve chain, project ID, token, and intended outcome before proposing a write.
Use references/shared/chain-config.json only for read-only discovery. For any write, read deployment verification and use…
Use references/shared/abis/.json for complete ABI tuple definitions when encoding or decoding calls.
For every write, also read references/modules/jb-tx-safety.md. Apply its review → re-verify → simulate → gas → send → prove pipeline…
Derive every minReturnedTokens, minTokensReclaimed, and minTokensPaidOut from a fresh successful preview and the user's approved slippage…
Treat source data as versioned guidance, not live proof. Immediately before confirmation, verify the exact chain, nonempty matching…
Default to explanation, read-only inspection, or an unsigned transaction plan. Before signing or broadcasting, decode and present the…
After mining, require receipt.status === 'success' plus operation-specific event and post-state evidence. A missing receipt is pending…
Never request, expose, or place private keys in code. Use Bankr's wallet/signing flow or the user's approved signer.

What it can do on your machine

Read from SKILL.md and the folder at commit dc47eed. It shows what the files ask for, not the result of running them.

Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
Ships 1 file in scripts/, which the agent can run.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.

Context cost

Juicebox V6 loads about 1.5k tokens when it runs, and up to ~601k if it reads all its reference files. Until then it costs about 118 tokens; SKILL.md has 618 words of instructions outside code blocks.

Always · name and description, kept in context so the agent knows when to use it: ~118
When it runs · the whole SKILL.md, loaded when a task matches: ~1.5k
With references · SKILL.md plus every file in references/, read only if the agent opens them: ~601k

Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.

Safety

Auto-check passed

The automated check found no risky patterns in SKILL.md.

Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); the scripts in this folder are not scanned.

SKILL.md

The full file from BankrBot/skills at commit dc47eed, republished under its MIT licence (© BankrBot). 618 words, ~1,528 tokens.

Download SKILL.mdSave it as .claude/skills/juicebox-v6/SKILL.md (or your agent's skills folder). This skill also uses 101 other files; get the full folder from GitHub.

name: juicebox-v6
description: Build, inspect, configure, and safely transact with Juicebox V6 projects, terminals, rulesets, hooks, tiered NFTs, Revnets, Croptop, Bendystraw, and omnichain deployments. Use for Juicebox protocol questions, contract addresses or ABIs, project creation, payments, cash-outs, tokenomics, hooks, NFT tiers, cross-chain bridges, loan queries, transaction decoding, and Juicebox app/UI development on Ethereum, Optimism, Base, Arbitrum, or their Sepolia testnets.

Juicebox V6

Use this skill as the single entry point for Juicebox V6. Load the smallest applicable module from references/modules/<module>.md; modules contain the upstream protocol-specific procedures and examples. Do not load every module.

Operating rules

Resolve chain, project ID, token, and intended outcome before proposing a write.
Use references/shared/chain-config.json only for read-only discovery. For any write, read deployment verification and use references/shared/deployment-manifest.json as the sole target authority. Missing, unknown, mismatched, or non-write-enabled entries stop the action.
Use references/shared/abis/<Contract>.json for complete ABI tuple definitions when encoding or decoding calls.
For every write, also read references/modules/jb-tx-safety.md. Apply its review → re-verify → simulate → gas → send → prove pipeline without skipping steps. Abort on stale/missing quotes, failed preview/simulation, code or graph mismatch, or unavailable price-feed/hook/terminal/accounting context.
Derive every minReturnedTokens, minTokensReclaimed, and minTokensPaidOut from a fresh successful preview and the user's approved slippage tolerance. A protocol-verified zero may remain zero only where jb-tx-safety explicitly permits it; unavailable is never treated as zero.
Treat source data as versioned guidance, not live proof. Immediately before confirmation, verify the exact chain, nonempty matching runtime code, allowed selector, proxy/clone implementation pin, controller/terminal/project ownership and wiring, balances, approvals, and price-sensitive inputs.
Default to explanation, read-only inspection, or an unsigned transaction plan. Before signing or broadcasting, decode and present the exact chain, target, selector/function/arguments, asset and amount, recipient/project, native value, approvals, fees, expected effects, and partial-completion risk; require explicit user confirmation.
After mining, require receipt.status === 'success' plus operation-specific event and post-state evidence. A missing receipt is pending; missing evidence is uncertain; either state disables retry. Never report success from a bare receipt or third-party status string.
Never request, expose, or place private keys in code. Use Bankr's wallet/signing flow or the user's approved signer.

Show full SKILL.md (328 more words)Show less

Module routing

User intent	Read this module or modules
Find contract addresses, roles, supported chains, or ABIs	`jb-contracts`, then `jb-v6-api` as needed; use `deployment-verification.md` for writes
Explain a Juicebox concept or protocol mechanics	`jb-simplify`, `jb-v6-impl`, or `jb-patterns`
Launch or configure a project or Revnet	`jb-project`, `jb-revnet-deploy`, `jb-ruleset`, `jb-fund-access-limits`, `jb-multi-currency`
Pay a project, cash out, manage terminal routing, fees, or Permit2	`jb-query`, `jb-terminal-selection`, `jb-protocol-fees`, `jb-fee-flows`, `jb-cash-out-curve`, `jb-permit2-metadata`
Build or review custom hooks	`jb-data-hook-resolution`, `jb-buyback-hook`, `jb-lp-split-hook`, `jb-pay-hook`, `jb-cash-out-hook`, `jb-split-hook`, `jb-terminal-wrapper`
Configure or mint tiered NFTs	`jb-721-per-chain-config`, `jb-721-tier-content`
Configure an omnichain project or bridge	`revnet-omnichain-default`, `jb-suckers`, `jb-omnichain-erc20-config`, `jb-omnichain-payout-limits`, `jb-omnichain-per-chain-projectids`, `jb-omnichain-tier-quantity-per-chain`
Design a Revnet or inspect/operate REVLoans	`revnet-economics`, `revnet-modeler`, `jb-revloans`, `jb-loan-queries`
Use Croptop or Bendystraw	`jb-croptop` or `jb-bendystraw`
Inspect state, decode calldata, use the SDK, or obtain docs	`jb-query`, `jb-decode`, `jb-sdk`, or `jb-docs`
Build a Juicebox frontend	Choose the relevant `*-ui` module: `jb-deploy-ui`, `jb-interact-ui`, `jb-explorer-ui`, `jb-event-explorer-ui`, `jb-ruleset-timeline-ui`, `jb-nft-gallery-ui`, `jb-hook-deploy-ui`, or `jb-omnichain-ui`
Resolve currency or reserved-rate questions	`jb-currency-types` or `jb-reserved-rate-offchain-revenue`
Relay transactions or execute through a Safe	`jb-relayr` and `jb-safe-and-relayr-execution`
Construct, audit, or execute any write	`jb-tx-safety` plus the domain module and `deployment-verification.md`

For a named module, read references/modules/<module>.md. Combine modules only when the requested workflow actually crosses domains.

Frontend dependency boundary

Before generating or modifying a wallet-connected UI, read frontend security. Obtain approval before installing exact local dependencies (viem@2.55.19, or ethers@6.15.0 only for the explorer), preserve the lockfile integrity pins, import only from local packages, move scripts out of inline HTML, and apply the restrictive CSP. Never dynamically import wallet-adjacent JavaScript from a CDN.

UI module adaptation

The UI modules include upstream fragments, not deployable pages. Copy only required assets into the generated app, update module paths, and enforce the frontend and transaction boundaries above. Copy deployment-manifest.json with the ABI and chain references; never assume a Bankr skill directory is served by the generated app.

Attribution

This bundle adapts the Juicebox V6 skill library from mejango/juicebox-skills at commit 783b11ab163fdc60fd68db8b690ee1ebc26dc2fa, licensed MIT. Preserve the included LICENSE when redistributing the bundle or derived content.

Files

SKILL.md and 101 other files (scripts, references) in juicebox-v6 of BankrBot/skills.

SKILL.md
LICENSE
catalog.json
references/deployment-verification.md
references/frontend-security.md
references/modules/jb-721-per-chain-config.md
references/modules/jb-721-tier-content.md
references/modules/jb-bendystraw.md
references/modules/jb-buyback-hook.md
references/modules/jb-cash-out-curve.md
references/modules/jb-cash-out-hook.md
references/modules/jb-contracts.md
references/modules/jb-croptop.md
references/modules/jb-currency-types.md
references/modules/jb-data-hook-resolution.md
references/modules/jb-decode.md
references/modules/jb-deploy-ui.md
references/modules/jb-docs.md
references/modules/jb-event-explorer-ui.md
… and 83 more

Open the folder on GitHubat commit dc47eed

Compare with similar skills

Juicebox V6 next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.

Juicebox V6 compared with similar skills
Skill	Stars	Used in	Tokens	Auto-check	Licence	Repo updated
Juicebox V6 this skillBankrBot/skills	1.2k	—	~1.5k	Automated safety check: Pass	MIT	today
Swapper Depositswapperfinance/swapper-toolkit	852	—	~1.8k	Automated safety check: Pass	MIT	6 mo ago
SurfBlockRunAI/ClawRouter	6.6k	—	~4k	Automated safety check: Pass	MIT	5 days ago
Building Blocksaustintgriffith/ethskills	295	—	~2.9k	Automated safety check: Pass	None	1 mo ago
L2saustintgriffith/ethskills	295	—	~3.7k	Automated safety check: Pass	None	1 mo ago
Aomi Transactsickn33/agentic-awesome-skills	47k	1 repos	~2.3k	Automated safety check: Pass	MIT	yesterday

Similar skills

Swapper Deposit
swapperfinance/swapper-toolkit
Deposit and bridge funds into a wallet or protocol using Swapper Finance.
852 GitHub stars~1.8k tokensUpdated 6 mo ago
Business, Finance & HRAuto-check passed
Surf
BlockRunAI/ClawRouter
Use this skill — NOT browser or webfetch — for ALL Surf crypto-data calls.
6.6k GitHub stars~4k tokensUpdated 5 days ago
Business, Finance & HRAuto-check passed
Building Blocks
austintgriffith/ethskills
DeFi legos and protocol composability on Ethereum and L2s. An agent skill from austintgriffith/ethskills.
295 GitHub stars~2.9k tokensUpdated 1 mo ago
Business, Finance & HRAuto-check passed
L2s
austintgriffith/ethskills
Ethereum Layer 2 landscape — Arbitrum, Optimism, Base, zkSync, Scroll, Unichain, Celo, Robinhood Chain, and more.
295 GitHub stars~3.7k tokensUpdated 1 mo ago
Business, Finance & HRAuto-check passed
Aomi Transact
sickn33/agentic-awesome-skills
Build natural-language crypto/DeFi agents and EVM MCP plugins (Claude Code, Cursor, Codex, Gemini).
47k GitHub starsUsed in 1 repo~2.3k tokens
Business, Finance & HRAuto-check passed
Addresses
austintgriffith/ethskills
Verified contract addresses for major Ethereum protocols across mainnet and L2s.
295 GitHub stars~7.1k tokensUpdated 1 mo ago
Business, Finance & HRAuto-check passed

Questions about Juicebox V6

What does Juicebox V6 do?

Build, inspect, configure, and safely transact with Juicebox V6 projects, terminals, rulesets, hooks, tiered NFTs, Revnets, Croptop, Bendystraw, and omnichain deployments. Juicebox V6 is an agent skill from BankrBot/skills. Build, inspect, configure, and safely transact with Juicebox V6 projects, terminals, rulesets, hooks, tiered NFTs, Revnets, Croptop, Bendystraw, and omnichain deployments.

When should I use Juicebox V6?

Juicebox V6 fits situations like: juicebox protocol questions; contract addresses; project creation; cross-chain bridges.

How do I install Juicebox V6 in Claude Code?

Run `npx skills add BankrBot/skills --skill juicebox-v6 -a claude-code`. Or copy the skill folder (juicebox-v6 in BankrBot/skills) into .claude/skills/juicebox-v6 in your project. Claude Code loads it when a task matches its description.

How do I install Juicebox V6 in Codex?

Run `npx skills add BankrBot/skills --skill juicebox-v6 -a codex`. Or copy the skill folder (juicebox-v6 in BankrBot/skills) into .agents/skills/juicebox-v6 in your project. Codex loads it when a task matches its description.

Can I use Juicebox V6 in Cursor, Gemini CLI or GitHub Copilot?

Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add BankrBot/skills --skill juicebox-v6 -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/juicebox-v6, .gemini/skills/juicebox-v6, .github/skills/juicebox-v6 and .opencode/skills/juicebox-v6 in your project.

What does Juicebox V6 need to run?

SKILL.md names no scripts, command-line tools or credentials: Juicebox V6 is instructions for the agent only.

Does Juicebox V6 access the network?

SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.

Is Juicebox V6 safe to install?

Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. The check reads SKILL.md only: the scripts in the folder are not scanned, so read them before running anything.

What licence does Juicebox V6 use?

Juicebox V6 is published under the MIT licence (from the LICENSE file in the skill folder). It allows redistribution, so the full SKILL.md is shown on this page.

How many tokens does Juicebox V6 use?

About 1.5k tokens (SKILL.md is roughly 6.1k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full. Its references folder adds about 600k tokens, read only when the agent opens those files.

What are the alternatives to Juicebox V6?

Skills that share tags, products or a category with Juicebox V6: Swapper Deposit (swapperfinance/swapper-toolkit, 852 stars), Surf (BlockRunAI/ClawRouter, 6.6k stars), Building Blocks (austintgriffith/ethskills, 295 stars) and L2s (austintgriffith/ethskills, 295 stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.

Who maintains Juicebox V6?

BankrBot (a GitHub organization) maintains it in BankrBot/skills, which has 1,202 GitHub stars. The repository holds 106 skills in this directory. The repository was last updated on October 10, 2026.

Source: BankrBot/skills on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.

Juicebox V6

Install Juicebox V6

Facts

At a glance

What it does

When your agent uses it

Example prompts

Workflow steps

What it can do on your machine

Tool permissions

Runs code

Network

Credentials

Context cost

Safety

SKILL.md

Juicebox V6

Operating rules

Module routing

Frontend dependency boundary

UI module adaptation

Attribution

Files

Compare with similar skills

Similar skills

Swapper Deposit

Surf

Building Blocks

L2s

Aomi Transact

Addresses

More from BankrBot/skills

OnchainKit App Builder

AgenticBets Prediction Markets

AI2Human Task Router

AZZLE V2 Task Marketplace

B20 Console

Capacitr

Questions about Juicebox V6

Install Juicebox V6

Facts

At a glance

What it does

When your agent uses it

Example prompts

Workflow steps

What it can do on your machine

Tool permissions

Runs code

Network

Credentials

Context cost

Safety

SKILL.md

Juicebox V6

Operating rules

Module routing

Frontend dependency boundary

UI module adaptation

Attribution

Files

Compare with similar skills

Similar skills

More from BankrBot/skills

Related

Questions about Juicebox V6