Configuring Horizon
coollabsio/coolify
A skill your agent uses whenever the user mentions Horizon by name in a Laravel context.
PowerX CRUD Repository 规则(BaseRepository、tenant 约束、分页). An agent skill from ArtisanCloud/PowerX.
$ npx skills add ArtisanCloud/PowerX --skill crud-repository -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install ArtisanCloud/PowerX crud-repository --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/ArtisanCloud/PowerX.git skills-src && mkdir -p .claude/skills && cp -r skills-src/.codex/skills/crud/repository .claude/skills/crud-repository && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "crud-repository" agent skill from https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repository into .claude/skills/crud-repository/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "crud-repository", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repositoryType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add ArtisanCloud/PowerX --skill crud-repository -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install ArtisanCloud/PowerX crud-repository --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/ArtisanCloud/PowerX.git skills-src && mkdir -p .agents/skills && cp -r skills-src/.codex/skills/crud/repository .agents/skills/crud-repository && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "crud-repository" agent skill from https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repository into .agents/skills/crud-repository/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "crud-repository", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add ArtisanCloud/PowerX --skill crud-repository -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install ArtisanCloud/PowerX crud-repository --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/ArtisanCloud/PowerX.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/.codex/skills/crud/repository .cursor/skills/crud-repository && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "crud-repository" agent skill from https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repository into .cursor/skills/crud-repository/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "crud-repository", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/ArtisanCloud/PowerX.git --path .codex/skills/crud/repository--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add ArtisanCloud/PowerX --skill crud-repository -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install ArtisanCloud/PowerX crud-repository --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/ArtisanCloud/PowerX.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/.codex/skills/crud/repository .gemini/skills/crud-repository && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "crud-repository" agent skill from https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repository into .gemini/skills/crud-repository/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "crud-repository", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install ArtisanCloud/PowerX crud-repositoryInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add ArtisanCloud/PowerX --skill crud-repository -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/ArtisanCloud/PowerX.git skills-src && mkdir -p .github/skills && cp -r skills-src/.codex/skills/crud/repository .github/skills/crud-repository && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "crud-repository" agent skill from https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repository into .github/skills/crud-repository/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "crud-repository", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add ArtisanCloud/PowerX --skill crud-repository -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install ArtisanCloud/PowerX crud-repository --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/ArtisanCloud/PowerX.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/.codex/skills/crud/repository .opencode/skills/crud-repository && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "crud-repository" agent skill from https://github.com/ArtisanCloud/PowerX/tree/release%2Fv1.0.0/.codex/skills/crud/repository into .opencode/skills/crud-repository/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "crud-repository", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
crud-repositoryPowerX CRUD Repository 规则(BaseRepository、tenant 约束、分页). An agent skill from ArtisanCloud/PowerX.
Crud Repository is an agent skill from ArtisanCloud/PowerX. PowerX CRUD Repository 规则(BaseRepository、tenant 约束、分页)。
Its SKILL.md is about 2k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Backend & APIs. The repository describes itself as: PowerX是一款以企业微信为基础的微信私域运营开放平台,帮助企业实现引流获客、精细运营。 The licence is Apache-2.0.
3 steps, taken from the first numbered list in SKILL.md.
Read from SKILL.md and the folder at commit 3f7619d. It shows what the files ask for, not the result of running them.
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
No scripts in the folder and no shell commands in SKILL.md (its code samples are yaml).
From the folder's file list and the shell code blocks in SKILL.md.
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Crud Repository loads about 2k tokens when it runs. Until then it costs about 18 tokens; SKILL.md has 18 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
The full file from ArtisanCloud/PowerX at commit 3f7619d, republished under its Apache-2.0 licence (© ArtisanCloud). 18 words, ~2,049 tokens.
.claude/skills/crud-repository/SKILL.md (or your agent's skills folder).本文件内嵌规则。kind: ruleset
name: crud_repository
version: 1.0.0
owner: powerx
status: stable
meta:
intent: >
统一 Repository(持久化)层的接口与实现规范:只负责数据访问与映射,
不承载业务逻辑;严格多租户隔离、软删、分页筛选与一致的错误/返回语义。
CoreX 模块仓储统一采用 BaseRepository 泛型封装,便于事务注入与测试。
references:
- constitution.md
- crud_model.yaml
- crud_migration.yaml
- crud_dto.yaml
- crud_di.yaml
scope:
codebase:
repo_globs:
- "internal/repository/**/**_repo.go"
- "pkg/corex/db/persistence/repository/**/**_repo.go"
model_globs:
- "pkg/corex/db/persistence/model/**/**.go"
principles:
- 目录规范:CoreX 仓库实现放置于 `pkg/corex/db/persistence/repository/<domain>/`,目录名使用 snake_case,对应的模型位于同层级 `model/`。
- 职责单一:Repository 只做数据访问(SQL/GORM),禁止业务分支与权限判断。
- 多租户强约束:所有查询均带 TenantID 条件;默认忽略软删(GORM 默认生效)。
- 事务注入:方法接受 *gorm.DB(可为 tx),由 Service 层控制 tx 生命周期。
- 上下文贯穿:方法首参为 context.Context,用于 tracing/超时/审计钩子。
- 错误语义:不存在返回 gorm.ErrRecordNotFound(由 Service 翻译成 404);唯一冲突返回 ErrConflict(由 Service 翻译 409)。
- 可测试性:提供接口与实现;实现命名 `XxxRepoImpl`,禁止全局单例。
- 性能:列表查询必须显式选择字段/建立索引,禁止 N+1(注意 Preload 选择性)。
checks:
# 目录/文件命名
- id: repo.file.naming
level: error
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- must_package_suffix: "repo"
# BaseRepository 形态
- id: repo.base_repository.pattern
level: error
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- must_contain_regex: "type [A-Za-z0-9]+Repository struct {"
- must_contain_regex: "\\*repository.BaseRepository"
- must_contain_regex: "func New[A-Za-z0-9]+Repository\\(db \\*gorm\\.DB\\)"
- must_not_import: ["github.com/gin-gonic/gin"] # 不允许直接耦合 HTTP
# 方法签名(ctx + db)
- id: repo.method.signature
level: error
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- must_contain_regex: "func \\(r \\*.*Repository\\) .*\\(ctx context\\.Context, db \\*gorm\\.DB"
- must_import: ["context","gorm.io/gorm"]
# 多租户条件
- id: repo.must.tenant.scope
level: error
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- contains_any:
- "Where(\"tenant_id = ?\""
- "Scopes(TenantScope("
- "WithTenant("
message: "所有 CRUD 查询必须带 TenantID(直写 Where 或统一 Scopes/TenantScope)"
# 列表与分页(limit/offset 或 cursor)
- id: repo.list.pagination
level: error
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- contains_any: ["Limit(","Offset(","Scopes(Paginate("]
# 冲突与不存在的错误
- id: repo.error.mapping
level: warn
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- contains_any: ["gorm.ErrRecordNotFound","ErrDuplicate","unique"]
message: "建议把 gorm.ErrRecordNotFound 原样返回,由 Service 统一翻译为 404;唯一冲突包装为 ErrConflict"
# 软删(默认开启),如实现硬删需标注
- id: repo.soft_delete
level: warn
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- should_contain_any: ["Delete(&m)","Unscoped().Delete("]
# 性能/索引使用(建议)
- id: repo.index.hint
level: warn
when: { glob: "internal/repository/**/**_repo.go" }
assert:
- should_contain_any: ["Select(","Omit("]
acceptance:
checklist:
- "[ ] 每个仓库文件包含接口 + 实现 + New 构造函数"
- "[ ] 方法签名统一为 (ctx context.Context, db *gorm.DB, ...)"
- "[ ] 所有查询带 TenantID 条件(Where/Scopes/TenantScope)"
- "[ ] 列表查询有分页(Limit/Offset 或 Cursor)"
- "[ ] 不做业务鉴权/分支;错误语义由 Service 统一翻译"
- "[ ] 使用软删;如需硬删必须在 Service 授权并清晰标注"
- "[ ] 可被 DI 装配(由 Deps 提供 *gorm.DB 注入)"
templates:
repo_interface_impl_go: |
// pkg/corex/db/persistence/repository/{{domain}}/{{resource}}_repo.go
package {{domain}}repo
import (
"context"
"gorm.io/gorm"
m "{{module_path}}/pkg/corex/db/persistence/model/{{domain}}"
)
// {{Entity}}Repo 数据访问接口
type {{Entity}}Repo interface {
Create(ctx context.Context, db *gorm.DB, tenantID uint64, in *m.{{Entity}}) error
GetByID(ctx context.Context, db *gorm.DB, tenantID uint64, id string) (*m.{{Entity}}, error)
List(ctx context.Context, db *gorm.DB, tenantID uint64, pg Page, filters map[string]string) ([]*m.{{Entity}}, int64, error)
Update(ctx context.Context, db *gorm.DB, tenantID uint64, in *m.{{Entity}}) error
Delete(ctx context.Context, db *gorm.DB, tenantID uint64, id string, hard bool) error
// Tx 透传辅助(可选)
WithTx(ctx context.Context, db *gorm.DB, fn func(tx *gorm.DB) error) error
}
// 实现
type {{Entity}}RepoImpl struct {
db *gorm.DB
}
func New{{Entity}}Repo(db *gorm.DB) {{Entity}}Repo {
return &{{Entity}}RepoImpl{db: db}
}
// 分页结构(按项目实际放置到共用包)
type Page struct {
Page int
PageSize int
SortBy string
SortOrder string
}
func (r *{{Entity}}RepoImpl) Create(ctx context.Context, db *gorm.DB, tenantID uint64, in *m.{{Entity}}) error {
in.TenantID = tenantID
return db.WithContext(ctx).Create(in).Error
}
func (r *{{Entity}}RepoImpl) GetByID(ctx context.Context, db *gorm.DB, tenantID uint64, id string) (*m.{{Entity}}, error) {
var out m.{{Entity}}
err := db.WithContext(ctx).
Where("tenant_id = ? AND id = ?", tenantID, id).
First(&out).Error
if err != nil {
return nil, err // 由 Service 翻译为 404
}
return &out, nil
}
// 可抽成 Scopes:TenantScope / Filters / Paginate
func (r *{{Entity}}RepoImpl) List(ctx context.Context, db *gorm.DB, tenantID uint64, pg Page, filters map[string]string) ([]*m.{{Entity}}, int64, error) {
q := db.WithContext(ctx).Model(&m.{{Entity}}{}).Where("tenant_id = ?", tenantID)
// 简化:按 filters 动态拼装(生产中建议固定白名单)
if v, ok := filters["status"]; ok { q = q.Where("status = ?", v) }
if v, ok := filters["q"]; ok { q = q.Where("name ILIKE ?", "%"+v+"%") }
// 计数
var total int64
if err := q.Count(&total).Error; err != nil { return nil, 0, err }
// 排序/分页
orderBy := "created_at desc"
if pg.SortBy != "" {
if pg.SortOrder == "" { pg.SortOrder = "desc" }
orderBy = pg.SortBy + " " + pg.SortOrder
}
if pg.Page <= 0 { pg.Page = 1 }
if pg.PageSize <= 0 { pg.PageSize = 20 }
var items []*m.{{Entity}}
err := q.Order(orderBy).
Limit(pg.PageSize).
Offset((pg.Page-1)*pg.PageSize).
Find(&items).Error
if err != nil { return nil, 0, err }
return items, total, nil
}
func (r *{{Entity}}RepoImpl) Update(ctx context.Context, db *gorm.DB, tenantID uint64, in *m.{{Entity}}) error {
return db.WithContext(ctx).
Model(&m.{{Entity}}{}).
Where("tenant_id = ? AND id = ?", tenantID, in.ID).
Updates(map[string]any{
"name": in.Name,
"meta": in.Meta,
"status": in.Status,
}).Error
}
func (r *{{Entity}}RepoImpl) Delete(ctx context.Context, db *gorm.DB, tenantID uint64, id string, hard bool) error {
q := db.WithContext(ctx).Where("tenant_id = ? AND id = ?", tenantID, id)
if hard {
return q.Unscoped().Delete(&m.{{Entity}}{}).Error
}
return q.Delete(&m.{{Entity}}{}).Error
}
func (r *{{Entity}}RepoImpl) WithTx(ctx context.Context, db *gorm.DB, fn func(tx *gorm.DB) error) error {
return db.WithContext(ctx).Transaction(func(tx *gorm.DB) error { return fn(tx) })
}
scopes_go: |
// internal/repository/scopes/scopes.go (可选:集中放置)
package scopes
import "gorm.io/gorm"
func TenantScope(tenantID uint64) func(*gorm.DB) *gorm.DB {
return func(db *gorm.DB) *gorm.DB {
return db.Where("tenant_id = ?", tenantID)
}
}
func Paginate(page, pageSize int) func(*gorm.DB) *gorm.DB {
if page <= 0 { page = 1 }
if pageSize <= 0 { pageSize = 20 }
return func(db *gorm.DB) *gorm.DB {
return db.Limit(pageSize).Offset((page-1)*pageSize)
}
}© ArtisanCloud, Apache-2.0. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Just SKILL.md in .codex/skills/crud/repository of ArtisanCloud/PowerX.
Open the folder on GitHubat commit 3f7619d
Crud Repository next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Crud Repository this skillArtisanCloud/PowerX | 379 | — | ~2k | Automated safety check: Pass | Apache-2.0 | |
| Configuring Horizoncoollabsio/coolify | 63k | 4 repos | ~898 | Automated safety check: Pass | MIT | |
| Nestjs Best Practicesrolling-scopes/rsschool-app | 10k | 6 repos | ~1.2k | Automated safety check: Pass | MIT | |
| Sub2API AdminWei-Shaw/sub2api | 44k | 1 repos | ~717 | Automated safety check: Pass | LGPL-3.0 | |
| Firecrawl Build Onboardingfirecrawl/firecrawl | 190k | 1 repos | ~1.4k | Automated safety check: Notes | ISC | |
| Obsidian BasesAtmosphere/atmosphere | 3.8k | 22 repos | ~3.2k | Automated safety check: Pass | Apache-2.0 |
coollabsio/coolify
A skill your agent uses whenever the user mentions Horizon by name in a Laravel context.
rolling-scopes/rsschool-app
NestJS best practices and architecture patterns for building production-ready applications.
Wei-Shaw/sub2api
Manages a Sub2API deployment from the command line: accounts, redeem and invitation codes, groups, proxies, imports, exports and raw admin API calls.
firecrawl/firecrawl
Gets Firecrawl working in a project: signs you in through the browser, saves FIRECRAWL_API_KEY to .env and picks the first SDK or REST path.
Atmosphere/atmosphere
Create and edit Obsidian Bases (.base files) with views, filters, formulas, and summaries.
coollabsio/coolify
ACTIVATE when the user works on authentication in Laravel. An agent skill from coollabsio/coolify.
ArtisanCloud/PowerX
PowerX API 命名与访问规范(/api/v1、/admin、/internal 边界). An agent skill from ArtisanCloud/PowerX.
ArtisanCloud/PowerX
PowerX 底座 Capability 治理与发布准入规则。用于审计 REST/OpenAPI/gRPC/Gin 生成的能力候选、正式 platformcapabilities 目录、Capability Registry 登记、agentusable/permissioncode/risklevel 元数据、ignore…
ArtisanCloud/PowerX
PowerX CRUD 依赖注入规则(Deps 单入口、构造注入、跨传输复用). An agent skill from ArtisanCloud/PowerX.
ArtisanCloud/PowerX
PowerX CRUD gRPC 开发规范(proto、server、拦截器、错误映射). An agent skill from ArtisanCloud/PowerX.
ArtisanCloud/PowerX
PowerX HTTP Handler 规则(绑定校验、统一回包、无 DB IO). An agent skill from ArtisanCloud/PowerX.
ArtisanCloud/PowerX
PowerX CRUD HTTP 开发规范(管理端路由、绑定、错误桥接、多租户). An agent skill from ArtisanCloud/PowerX.
Categories
PowerX CRUD Repository 规则(BaseRepository、tenant 约束、分页). An agent skill from ArtisanCloud/PowerX. Crud Repository is an agent skill from ArtisanCloud/PowerX.
Crud Repository fits situations like: backend & APIs work in your project.
Run `npx skills add ArtisanCloud/PowerX --skill crud-repository -a claude-code`. Or copy the skill folder (.codex/skills/crud/repository in ArtisanCloud/PowerX) into .claude/skills/crud-repository in your project. Claude Code loads it when a task matches its description.
Run `npx skills add ArtisanCloud/PowerX --skill crud-repository -a codex`. Or copy the skill folder (.codex/skills/crud/repository in ArtisanCloud/PowerX) into .agents/skills/crud-repository in your project. Codex loads it when a task matches its description.
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add ArtisanCloud/PowerX --skill crud-repository -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/crud-repository, .gemini/skills/crud-repository, .github/skills/crud-repository and .opencode/skills/crud-repository in your project.
SKILL.md names no scripts, command-line tools or credentials: Crud Repository is instructions for the agent only.
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
Crud Repository is published under the Apache-2.0 licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
About 2k tokens (SKILL.md is roughly 8.2k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
Skills that share tags, products or a category with Crud Repository: Configuring Horizon (coollabsio/coolify, 63k stars), Nestjs Best Practices (rolling-scopes/rsschool-app, 10k stars), Sub2API Admin (Wei-Shaw/sub2api, 44k stars) and Firecrawl Build Onboarding (firecrawl/firecrawl, 190k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
ArtisanCloud (a GitHub organization) maintains it in ArtisanCloud/PowerX, which has 379 GitHub stars. The repository holds 21 skills in this directory. The repository was last updated on October 9, 2026.
Source: ArtisanCloud/PowerX on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.