Telnyx Email Suppressions Curl

<!-- Auto-generated from Telnyx OpenAPI specs. Do not edit. -->

Telnyx Email Suppressions - curl

Installation

# curl is pre-installed on macOS, Linux, and Windows 10+
# jq is required for the import polling examples below:
#   macOS: brew install jq
#   Debian/Ubuntu: sudo apt-get install jq

Setup

export TELNYX_API_KEY="YOUR_API_KEY_HERE"

All examples below use $TELNYX_API_KEY for authentication and the API base URL https://api.telnyx.com/v2.

Error Handling

All API calls can fail with network errors, authentication errors (401), or framework errors (406). List-query validation failures return 400, resource lookups can return 404, and JSON body validation failures normally return 422. Inspect the HTTP status and the top-level .errors array before continuing:

response_file=$(mktemp)
status=$(curl --silent --show-error \
  --output "$response_file" \
  --write-out '%{http_code}' \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/email_blocks")

if [ "$status" -lt 200 ] || [ "$status" -ge 300 ]; then
  printf 'Telnyx API error (HTTP %s):\n' "$status" >&2
  jq . "$response_file" >&2
  rm -f "$response_file"
  exit 1
fi
jq . "$response_file"
rm -f "$response_file"

Common statuses are 400 malformed query or import, 401 invalid API key, 404 resource not found, 409 group still has active suppressions, 413 import too large, and 422 invalid request attributes. A successful delete may return 204 No Content; do not attempt to parse that response as JSON.

Important Notes

• Account isolation: Every lookup is scoped to the authenticated account. A malformed UUID or a UUID owned by another account is reported as 404.
• Normalized addresses: Recipient addresses are trimmed and lower-cased. The from address on a manual block is also normalized.
• Pagination: Most list operations use page[number] and page[size] (maximum 100). The main block list also supports opaque cursors. Do not combine offset and cursor modes.
• URL encoding: Percent-encode an email address placed in a URL path. For example, use alice%40example.com, not an untrusted raw string.
• Idempotency: Creating a block or adding a group suppression returns 200 when the matching suppression already exists and 201 when a row is created.

Operational Caveats

• POST /v2/email_blocks always creates reason: manual_block with source: manual. Customers cannot use this endpoint to create hard_bounce, spam_complaint, or invalid suppressions; caller-supplied reason and source are ignored.
• Scope is server-derived as account, domain, or address, never customer-set: no domain_id and no from gives account; domain_id without from gives domain; a from address gives address scope.
• unsubscribe and manual_block are overridable at send time with ignore_suppression: true. hard_bounce, spam_complaint, and invalid are not overridable. Bypassing an overridable suppression should be deliberate and auditable.
• Import is asynchronous. POST /v2/email_blocks/import returns 202 and a job ID; poll GET /v2/email_blocks/import/{id} until completed or failed. Import behavior for scoped suppressions may vary. Check the import result for the actual scope assigned.
• Export is synchronous and streams CSV directly. It does not create a job.
• Deleting a block is a soft delete: the row remains as a tombstone with status: removed. Recreating the same removed suppression reactivates it.
• The expires_at field is available for setting an expiration timestamp on suppressions.
• Check both error_count and skipped_count in the import response for rejected entries.
• A group suppression prevents sending to that address for every campaign that uses the unsubscribe group. It is not an account-wide unsubscribe for campaigns that do not use that group.

Reference Use Rules

Do not invent Telnyx parameters, enums, response fields, import counters, or CSV columns.

• Read references/api-details.md before building pagination, bulk migration, or delete automation.
• Before deciding whether a send may bypass a block, read suppression semantics.
• Before importing an exported list, read CSV export and import and verify the scope assigned by the import result.
• For exhaustive request fields, response fields, status codes, and operation IDs, use the operation catalog and response schemas.

Core Tasks

List suppressions

Use offset pagination for page-oriented tools or cursor pagination for sequential traversal without page-number offsets.

GET /v2/email_blocks

curl --get --silent --show-error \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  --data-urlencode 'page[size]=100' \
  --data-urlencode 'filter[reason]=hard_bounce' \
  --data-urlencode 'sort=-created_at' \
  "https://api.telnyx.com/v2/email_blocks"

Offset responses expose .meta.total_pages; cursor responses expose .meta.has_next and, when another page exists, .meta.next_cursor. Pass the returned cursor unchanged.

Create a manual suppression

POST /v2/email_blocks

curl --silent --show-error \
  -X POST \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "to": "blocked@example.com"
  }' \
  "https://api.telnyx.com/v2/email_blocks"

The response is .data with forced reason: manual_block, source: manual, a server-derived scope, and status: active. Do not send scope, group_id, bounce_category, dsn_code, or meta to this public operation.

Export suppressions as CSV

GET /v2/email_blocks/export

curl --get --silent --show-error \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Accept: text/csv" \
  --data-urlencode 'filter[created_after]=2026-01-01T00:00:00Z' \
  --output email_blocks_export.csv \
  "https://api.telnyx.com/v2/email_blocks/export"

The 200 response is the CSV stream itself. Filters supported by the list endpoint affect export. Although sort and page[*] are parsed and invalid values can return 400, valid values are ignored; export always streams every matching row ordered by created_at ASC, id ASC.

Start an asynchronous CSV import

POST /v2/email_blocks/import

curl --silent --show-error \
  -X POST \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Accept: application/json" \
  -F 'file=@email_blocks.csv;type=text/csv' \
  -F 'block_ttl_days=30' \
  "https://api.telnyx.com/v2/email_blocks/import"

A valid request returns 202 with .data.id and .data.status equal to pending. CSV content may not exceed 25 MiB or 250,000 rows. Provider format is auto-detected as sendgrid, mailgun, ses, or generic. block_ttl_days applies only to imported manual_block rows.

Poll an import job

GET /v2/email_blocks/import/{id}

IMPORT_ID="00000000-0000-0000-0000-000000000000"

while :; do
  body=$(curl --silent --show-error \
    -H "Authorization: Bearer $TELNYX_API_KEY" \
    "https://api.telnyx.com/v2/email_blocks/import/$IMPORT_ID") || exit 1
  state=$(printf '%s' "$body" | jq -r '.data.status')
  printf 'import status: %s\n' "$state"
  case "$state" in
    completed)
      printf '%s' "$body" | jq '.data | {
        processed_rows, created_count, existing_count,
        skipped_count, error_count, errors
      }'
      break
      ;;
    failed)
      printf '%s' "$body" | jq '.data | {status, failure_reason}' >&2
      exit 1
      ;;
    pending|processing) sleep 2 ;;
    *) printf 'unexpected import status: %s\n' "$state" >&2; exit 1 ;;
  esac
done

Completion counters are omitted until status is completed; failure_reason is only present on failure. Check both error_count and skipped_count in the import response for rejected entries, and inspect errors when present.

Retrieve a suppression

GET /v2/email_blocks/{id}

BLOCK_ID="00000000-0000-0000-0000-000000000000"
curl --silent --show-error \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/email_blocks/$BLOCK_ID"

Primary response fields are .data.id, .data.to, .data.from, .data.domain_id, .data.group_id, .data.reason, .data.source, .data.scope, .data.status, .data.expires_at, .data.created_at, and .data.updated_at.

Soft-delete a suppression

DELETE /v2/email_blocks/{id}

BLOCK_ID="00000000-0000-0000-0000-000000000000"
curl --silent --show-error \
  -X DELETE \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/email_blocks/$BLOCK_ID"

This returns 200 with the tombstone in .data; verify .data.status == "removed". Repeating the delete is idempotent and does not append another audit event.

List a suppression's audit events

GET /v2/email_blocks/{id}/events

BLOCK_ID="00000000-0000-0000-0000-000000000000"
curl --get --silent --show-error \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  --data-urlencode 'page[number]=1' \
  --data-urlencode 'page[size]=50' \
  "https://api.telnyx.com/v2/email_blocks/$BLOCK_ID/events"

Events are newest first and can be created, removed, expired, or override_used. This endpoint has offset pagination only and a default page size of 50; it has no filters, sort, or cursor parameters.

List unsubscribe groups

GET /v2/email_unsubscribe_groups

curl --get --silent --show-error \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  --data-urlencode 'page[number]=1' \
  --data-urlencode 'page[size]=25' \
  "https://api.telnyx.com/v2/email_unsubscribe_groups"

Groups use offset pagination only and fixed newest-first ordering.

Create an unsubscribe group

POST /v2/email_unsubscribe_groups

curl --silent --show-error \
  -X POST \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "name": "Product announcements",
    "description": "Optional opt-out category for product email"
  }' \
  "https://api.telnyx.com/v2/email_unsubscribe_groups"

name is required, non-empty, and at most 255 characters. A successful create returns 201 and the group in .data.

Retrieve an unsubscribe group

GET /v2/email_unsubscribe_groups/{id}

GROUP_ID="00000000-0000-0000-0000-000000000000"
curl --silent --show-error \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/email_unsubscribe_groups/$GROUP_ID"