Fire Skills
LeoYeAI/openclaw-master-skills
Practical fire building, management, and safety skills. An agent skill from LeoYeAI/openclaw-master-skills.
为真人电影感视频编写或修改“女主点烟、抛火柴、身后RISE逐渐燃烧”的连续镜头提示词。用于RISE火焰视频、30秒点烟后拉镜头、人物与火焰文字无遮挡构图、时间轴扩展、同角色参考图一致性及这套方案的换字或换人物请求。
No licenceAuto-check passed
Install Create Rise Fire Video
$ npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install sgyno09-source/reference-video-director create-rise-fire-video --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/sgyno09-source/reference-video-director.git skills-src && mkdir -p .claude/skills && cp -r skills-src/skills/create-rise-fire-video .claude/skills/create-rise-fire-video && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "create-rise-fire-video" agent skill from https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-video into .claude/skills/create-rise-fire-video/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "create-rise-fire-video", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-videoType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install sgyno09-source/reference-video-director create-rise-fire-video --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/sgyno09-source/reference-video-director.git skills-src && mkdir -p .agents/skills && cp -r skills-src/skills/create-rise-fire-video .agents/skills/create-rise-fire-video && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "create-rise-fire-video" agent skill from https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-video into .agents/skills/create-rise-fire-video/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "create-rise-fire-video", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install sgyno09-source/reference-video-director create-rise-fire-video --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/sgyno09-source/reference-video-director.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/skills/create-rise-fire-video .cursor/skills/create-rise-fire-video && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "create-rise-fire-video" agent skill from https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-video into .cursor/skills/create-rise-fire-video/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "create-rise-fire-video", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/sgyno09-source/reference-video-director.git --path skills/create-rise-fire-video--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install sgyno09-source/reference-video-director create-rise-fire-video --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/sgyno09-source/reference-video-director.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/skills/create-rise-fire-video .gemini/skills/create-rise-fire-video && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "create-rise-fire-video" agent skill from https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-video into .gemini/skills/create-rise-fire-video/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "create-rise-fire-video", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install sgyno09-source/reference-video-director create-rise-fire-videoInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/sgyno09-source/reference-video-director.git skills-src && mkdir -p .github/skills && cp -r skills-src/skills/create-rise-fire-video .github/skills/create-rise-fire-video && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "create-rise-fire-video" agent skill from https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-video into .github/skills/create-rise-fire-video/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "create-rise-fire-video", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install sgyno09-source/reference-video-director create-rise-fire-video --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/sgyno09-source/reference-video-director.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/skills/create-rise-fire-video .opencode/skills/create-rise-fire-video && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "create-rise-fire-video" agent skill from https://github.com/sgyno09-source/reference-video-director/tree/main/skills/create-rise-fire-video into .opencode/skills/create-rise-fire-video/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "create-rise-fire-video", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
create-rise-fire-video- GitHub stars
- 136
- Token cost
- ~342 tokens
- SKILL.md length
- 26 words
- Files
- 4 (incl. references, assets)
- Skills in repo
- 2
- Repo updated
- First seen
- Licence
- None found
At a glance
为真人电影感视频编写或修改“女主点烟、抛火柴、身后RISE逐渐燃烧”的连续镜头提示词。用于RISE火焰视频、30秒点烟后拉镜头、人物与火焰文字无遮挡构图、时间轴扩展、同角色参考图一致性及这套方案的换字或换人物请求。
- Works in 6 steps: 读取 完整方案，以其中时间表和状态约束为默认基线。 → 从当前用户要求提取人物参考、文字、时长、画幅与其他明确修改。用户当前要求优先；未要… → 将当前人物图绑定为唯一身份参考。若只编写提示词且未提供图，使用“@image_1（… → …
- SKILL.md covers 执行流程, 变体处理 and 验收
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Create Rise Fire Video is an agent skill from sgyno09-source/reference-video-director. 为真人电影感视频编写或修改“女主点烟、抛火柴、身后RISE逐渐燃烧”的连续镜头提示词。用于RISE火焰视频、30秒点烟后拉镜头、人物与火焰文字无遮挡构图、时间轴扩展、同角色参考图一致性及这套方案的换字或换人物请求。
Its SKILL.md is about 340 tokens, which your agent loads only when the skill is triggered. The skill folder holds 6 other files, including reference files and assets (for example `agents/openai.yaml` and `references/rise-30s.md`).
Example prompts
- “女主点烟、抛火柴、身后RISE逐渐燃烧”
- “/create-rise-fire-video”
Workflow steps
6 steps, taken from the first numbered list in SKILL.md.
- 读取 完整方案，以其中时间表和状态约束为默认基线。
- 从当前用户要求提取人物参考、文字、时长、画幅与其他明确修改。用户当前要求优先；未要求修改的部分保留。不要沿用早期15秒版本的时间标记或VSC文字。
- 将当前人物图绑定为唯一身份参考。若只编写提示词且未提供图，使用“@image_1（请绑定你的人物参考图）”占位符继续，不假装看过图片；若用户要求根据缺失图片实际生成内容，再要求补充。不要把旧图当作当前可用附件。
- 仅将参考图用于人物身份、服装及最终视觉气质。明确排除继承参考图中的开场大火、手持香烟、提前二郎腿、裁腿或人物遮字构图。默认保留短发、黑色服饰；用户更换人物图时以该图为准，不强行把人物改成旧角色。
- 输出完整、独立可用的提示词，按基础参数、参考图职责、人物/道具状态、摄影机轨迹、逐段时间轴、火焰文字、最终构图、负面约束排列。不要只输出摘要或要求用户拼接前文。
- 输出前检查动作和时点是否一致。将重复禁止项合并，保留所有改变状态、因果或构图的关键限制。
What it can do on your machine
Read from SKILL.md and the folder at commit d782a39. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Create Rise Fire Video loads about 342 tokens when it runs, and up to ~2.8k if it reads all its reference files. Until then it costs about 33 tokens; SKILL.md has 26 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Without a licence we can't republish the file, so here is its outline and opening line. It has 26 words (~342 tokens).
- name
- create-rise-fire-video
Files
SKILL.md and 3 other files (references, assets) in skills/create-rise-fire-video of sgyno09-source/reference-video-director.
- SKILL.md
- agents/openai.yaml
- assets/icon.svg
- references/rise-30s.md
Open the folder on GitHubat commit d782a39
Compare with similar skills
Create Rise Fire Video next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Create Rise Fire Video this skillsgyno09-source/reference-video-director | 136 | — | ~342 | Automated safety check: Pass | None | |
| Fire SkillsLeoYeAI/openclaw-master-skills | 2.2k | — | ~5.1k | Automated safety check: Pass | MIT | |
| Fire Numbermohitagw15856/pm-claude-skills | 1.4k | — | ~1.1k | Automated safety check: Pass | MIT | |
| Ops Firesdavepoon/buildwithclaude | 3.6k | — | ~1.8k | Automated safety check: Notes | MIT | |
| Ops FiresLifecycle-Innovations-Limited/claude-ops | 542 | — | ~3.7k | Automated safety check: Notes | MIT | |
| Fire Paper LoaderMengTo/Skills | 6.7k | — | ~2.7k | Automated safety check: Pass | MIT |
Similar skills
Fire Number
mohitagw15856/pm-claude-skills
Compute a financial-independence (FIRE) target and years-to-reach with every assumption labeled as an assumption — plus a sensitivity table instead of a single false-precision answer.
Ops Fires
davepoon/buildwithclaude
Production incidents dashboard. An agent skill from davepoon/buildwithclaude.
Ops Fires
Lifecycle-Innovations-Limited/claude-ops
OPS on-demand: This skill should be used when the user asks to "production fires", "what is on fire"…
Fire Paper Loader
MengTo/Skills
Build a burning-paper ring loader whose GLSL flame is drawn by a Worker on an OffscreenCanvas started from the head, so a main thread blocked by the page build cannot freeze it, with a progress…
Pi Fire Science
BankrBot/skills
Pattern Integrity / Pi Fire Science — catastrophic-incident and first-responder media brand, preparedness commerce, and $PiFire on Base (Bankr / Uniswap V4).
More from sgyno09-source/reference-video-director
Reference Video Director
sgyno09-source/reference-video-director
Creates production-ready reference-driven video prompts from character, outfit, scene, relationship, story, and duration inputs.
Questions about Create Rise Fire Video
What does Create Rise Fire Video do?
为真人电影感视频编写或修改“女主点烟、抛火柴、身后RISE逐渐燃烧”的连续镜头提示词。用于RISE火焰视频、30秒点烟后拉镜头、人物与火焰文字无遮挡构图、时间轴扩展、同角色参考图一致性及这套方案的换字或换人物请求。. Create Rise Fire Video is an agent skill from sgyno09-source/reference-video-director.
How do I install Create Rise Fire Video in Claude Code?
Run `npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a claude-code`. Or copy the skill folder (skills/create-rise-fire-video in sgyno09-source/reference-video-director) into .claude/skills/create-rise-fire-video in your project. Claude Code loads it when a task matches its description.
How do I install Create Rise Fire Video in Codex?
Run `npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a codex`. Or copy the skill folder (skills/create-rise-fire-video in sgyno09-source/reference-video-director) into .agents/skills/create-rise-fire-video in your project. Codex loads it when a task matches its description.
Can I use Create Rise Fire Video in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add sgyno09-source/reference-video-director --skill create-rise-fire-video -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/create-rise-fire-video, .gemini/skills/create-rise-fire-video, .github/skills/create-rise-fire-video and .opencode/skills/create-rise-fire-video in your project.
What does Create Rise Fire Video need to run?
SKILL.md names no scripts, command-line tools or credentials: Create Rise Fire Video is instructions for the agent only.
Does Create Rise Fire Video access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Create Rise Fire Video safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Create Rise Fire Video use?
No licence was found for Create Rise Fire Video or its repository. Without one, default copyright applies: ask the author before reusing or redistributing it.
How many tokens does Create Rise Fire Video use?
About 342 tokens (SKILL.md is roughly 1.4k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full. Its references folder adds about 2.5k tokens, read only when the agent opens those files.
What are the alternatives to Create Rise Fire Video?
Skills that share tags, products or a category with Create Rise Fire Video: Fire Skills (LeoYeAI/openclaw-master-skills, 2.2k stars), Fire Number (mohitagw15856/pm-claude-skills, 1.4k stars), Ops Fires (davepoon/buildwithclaude, 3.6k stars) and Ops Fires (Lifecycle-Innovations-Limited/claude-ops, 542 stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Create Rise Fire Video?
sgyno09-source (a GitHub user) maintains it in sgyno09-source/reference-video-director, which has 136 GitHub stars. The repository holds 2 skills in this directory. The repository was last updated on October 4, 2026.
Source: sgyno09-source/reference-video-director on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.