Orca CLI
stablyai/orca
Operate Orca-managed worktrees, folder contexts, terminals, repos, automations, artifacts, skill sharing, worktree comments, and Orca's embedded browser…
A skill your agent uses when 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow。
Install Comet Hotfix
$ npx skills add rpamis/comet --skill comet-hotfix -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install rpamis/comet comet-hotfix --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/rpamis/comet.git skills-src && mkdir -p .claude/skills && cp -r skills-src/eval/local/skills/benchmarks/040-beta/comet-hotfix .claude/skills/comet-hotfix && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "comet-hotfix" agent skill from https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfix into .claude/skills/comet-hotfix/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "comet-hotfix", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfixType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add rpamis/comet --skill comet-hotfix -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install rpamis/comet comet-hotfix --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/rpamis/comet.git skills-src && mkdir -p .agents/skills && cp -r skills-src/eval/local/skills/benchmarks/040-beta/comet-hotfix .agents/skills/comet-hotfix && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "comet-hotfix" agent skill from https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfix into .agents/skills/comet-hotfix/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "comet-hotfix", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add rpamis/comet --skill comet-hotfix -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install rpamis/comet comet-hotfix --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/rpamis/comet.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/eval/local/skills/benchmarks/040-beta/comet-hotfix .cursor/skills/comet-hotfix && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "comet-hotfix" agent skill from https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfix into .cursor/skills/comet-hotfix/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "comet-hotfix", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/rpamis/comet.git --path eval/local/skills/benchmarks/040-beta/comet-hotfix--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add rpamis/comet --skill comet-hotfix -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install rpamis/comet comet-hotfix --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/rpamis/comet.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/eval/local/skills/benchmarks/040-beta/comet-hotfix .gemini/skills/comet-hotfix && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "comet-hotfix" agent skill from https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfix into .gemini/skills/comet-hotfix/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "comet-hotfix", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install rpamis/comet comet-hotfixInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add rpamis/comet --skill comet-hotfix -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/rpamis/comet.git skills-src && mkdir -p .github/skills && cp -r skills-src/eval/local/skills/benchmarks/040-beta/comet-hotfix .github/skills/comet-hotfix && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "comet-hotfix" agent skill from https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfix into .github/skills/comet-hotfix/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "comet-hotfix", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add rpamis/comet --skill comet-hotfix -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install rpamis/comet comet-hotfix --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/rpamis/comet.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/eval/local/skills/benchmarks/040-beta/comet-hotfix .opencode/skills/comet-hotfix && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "comet-hotfix" agent skill from https://github.com/rpamis/comet/tree/master/eval/local/skills/benchmarks/040-beta/comet-hotfix into .opencode/skills/comet-hotfix/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "comet-hotfix", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
comet-hotfix- GitHub stars
- 3.2k
- Token cost
- ~1.5k tokens
- SKILL.md length
- 481 words
- Files
- 1
- Skills in repo
- 52
- Repo updated
- First seen
- Licence
- MIT
At a glance
A skill your agent uses when 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow。
- Works in 6 steps: 输出语言约束 → 快速开启（预设 open） → 直接构建（预设 build） → …
- 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow
- SKILL.md covers 流程（预设流程，6 步）, 连续执行模式, 升级判定 and 退出条件, plus 1 more section
- Calls node, mvn and npm
What it does
Comet Hotfix is an agent skill from rpamis/comet. Use when 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow。
Its SKILL.md is about 1.5k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Agent Workflows. The repository describes itself as: Comet: agent skill harness for turning ideas into evaluated workflows. The licence is MIT.
When your agent uses it
- 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow
Example prompts
- “/comet-hotfix”
Workflow steps
6 steps, taken from the step headings in SKILL.md.
What it can do on your machine
Read from SKILL.md and the folder at commit c28e724. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
Shell commands in SKILL.md call:
nodemvnnpm
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md. Its commands use npm, which can reach the network depending on how they are called.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Comet Hotfix loads about 1.5k tokens when it runs. Until then it costs about 21 tokens; SKILL.md has 481 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from rpamis/comet at commit c28e724, republished under its MIT licence (© rpamis). 481 words, ~1,451 tokens.
Download SKILL.mdSave it as
.claude/skills/comet-hotfix/SKILL.md (or your agent's skills folder).- name
- comet-hotfix
- description
- Use when 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow。
Comet 预设路径：Hotfix
快速 bug fix 工作流：open → build → verify → archive。跳过 brainstorming 和完整 plan，适用于行为修复、不涉及新 capability 设计的场景。
适用条件（必须全部满足）：
- 修复已有功能的 bug，不新增 capability
- 不涉及接口变更或架构调整
- 改动范围可预估（文件数仅作提示，不作为硬性升级条件，见下方升级判定）
不适用：如修复过程命中质变信号（见「升级判定」章节），由用户决定是否升级为完整 /comet 流程。
流程（预设流程，6 步）
0. 输出语言约束
精简版 OpenSpec 产物必须使用触发本次工作流的用户请求语言。
执行链路：open → build → verify → archive。Hotfix 为每个阶段提供默认决策：精简开启、直接构建、按规模验证、验证通过后进入归档前最终确认。
开始前按 comet/reference/scripts.md 定位 Comet 脚本（定位 comet-env.mjs）；从任意入口恢复时先按 comet/reference/context-recovery.md 确认 phase/workflow。
1. 快速开启（预设 open）
复用 Comet open 能力创建 change，但使用 hotfix 默认值：不执行 openspec-explore 长探索，直接进入精简 change 创建。
立即执行： 使用 Skill 工具加载 openspec-new-change 技能。禁止跳过此步骤。
技能加载后，按其指引创建精简版产物：
proposal.md— 问题描述 + 根因分析 + 修复目标（无需方案对比）design.md— 修复方案（1 个即可，无需多方案对比）tasks.md— 修复任务清单- 无需 delta spec（除非修复改变了已有 spec 的验收场景）
初始化 Comet 状态文件：
node "$COMET_STATE" init <name> hotfix初始化后验证状态：
node "$COMET_STATE" check <name> open阶段守卫完成 open → build 过渡：
node "$COMET_GUARD" <change-name> open --apply检查 auto_transition 决定是否继续：
node "$COMET_STATE" next <name>NEXT: auto→ 继续 Step 2NEXT: manual→ 暂停，按HINT提示用户手动运行/<SKILL>
2. 直接构建（预设 build）
使用 hotfix 默认值：build_mode: direct，review_mode: off（hotfix/tweak 跳过 review_mode 选择——guard 不要求预设工作流选择此项）。跳过 Superpowers brainstorming 和 writing-plans（除非任务 > 3 个；若超过 3 个任务，转入 /comet-build 的计划与执行方式选择——注意这不触发 full workflow 升级，仅切换执行方式）。
继续或开始修改前，按 comet/reference/dirty-worktree.md 协议处理未提交改动。若归因后发现修复命中质变信号或文件数 tripwire，按本文件「升级判定」处理。
立即执行： 按 tasks.md 逐个执行任务：
- 读取
openspec/changes/<name>/tasks.md，获取未完成任务列表 - 对每个未完成任务：
- 根据任务描述修改代码
- 运行项目格式化命令（如
mvn spotless:apply、npm run format等） - 运行相关测试确认通过
- 将 tasks.md 中对应
- [ ]勾选为- [x] - 提交代码，commit message 格式：
fix: <简述修复>
- 全部任务完成后，显式运行项目相关测试和构建命令
执行 hotfix 期间，只要运行程序、测试、构建或手动验证时出现崩溃、异常行为、测试失败或构建失败，必须使用 Skill 工具加载 Superpowers systematic-debugging 技能。在完成根因调查前，不得提出或实施源码修复。
具体调查、最小失败测试、修复验证和保持当前 change 验证闭环的要求，按 comet/reference/debug-gate.md 执行。
如修复影响已有 spec 验收场景：
- 在
openspec/changes/<name>/specs/<capability>/spec.md创建 delta spec - 仅包含
## MODIFIED Requirements部分
3. 根因消除检查
在运行 build guard 之前执行，确保修复确实消除了问题根因：
- 读取 proposal.md 中的 bug 描述和根因
- 搜索验证问题代码不再存在
- 如根因未消除，回到 Step 2 继续修复（此时仍在 build 阶段，无需状态回退）
升级判定信号：
- 根因消除检查发现深层架构问题 → 命中质变信号，按「升级判定」章节暂停交用户决定
- 修复需要额外接口变更 → 命中质变信号（引入新的 public API），按「升级判定」章节暂停交用户决定
根因确认消除后，运行阶段守卫完成 build → verify 过渡：
node "$COMET_GUARD" <change-name> build --apply状态文件自动更新为 phase: verify、verify_result: pending，然后进入验证。
4. 验证（预设 verify）
复用 /comet-verify，由 comet-verify 的规模评估决定轻量或完整验证。
立即执行： 使用 Skill 工具加载 comet-verify 技能。禁止跳过此步骤。
无 delta spec 的小范围 hotfix 通常满足轻量验证条件（≤ 3 tasks、改动文件数低于 scale 阈值），comet-verify 的规模评估会选择轻量验证路径（6 项快速检查；默认 review_mode: off 时不自动派发代码审查）。若用户希望增加审查，可在验证前运行 node "$COMET_STATE" set <name> review_mode standard 或 thorough。若 hotfix 创建了 delta spec，则根据 comet-verify 的规模评估规则进入完整验证路径。
验证通过后，按 /comet-verify 的规则将 .comet.yaml 的 verify_result 记录为 pass，归档前不得跳过该状态。验证通过后仍必须进入 /comet-archive 的归档前最终确认，不得自动运行归档脚本。
5. 归档（预设 archive）
复用 /comet-archive。归档前必须满足 .comet.yaml 中 verify_result: pass，并等待 /comet-archive 的归档前最终确认。
立即执行： 使用 Skill 工具加载 comet-archive 技能进行归档。禁止跳过此步骤。
如有 delta spec，按 comet-archive 规则同步到 main spec，并处理关联 Design Doc 与 Plan 的归档标注。
Show full SKILL.md (178 more words)Show less
连续执行模式
<IMPORTANT>
Hotfix 流程默认 **一次性连续执行**。调用 `/comet-hotfix` 后，agent 在 hotfix 自有步骤间自动推进，不主动停顿。**例外**：若 `auto_transition: false`，则在每个 phase 边界（build/verify/archive 之间）停下，由用户手动运行下一阶段命令——此时连续执行降级为逐阶段手动推进，详见下方「自动衔接下一阶段」。但无论 `auto_transition` 取何值，以下情况都必须暂停等待用户确认：- 遇到升级判定信号（见「升级判定」章节），必须使用当前平台可用的用户输入/确认机制暂停并等待用户明确选择：继续 hotfix 流程，还是升级为完整
/comet流程 - 任务超过 3 个转入
/comet-build时的工作区隔离和执行方式选择 - 验证阶段（comet-verify）的验证失败决策和分支处理决策
- 归档前最终确认（comet-archive 执行归档脚本前）
执行顺序：快速开启 → 直接构建 → 根因消除检查 → 验证 → 归档 → 完成
每个阶段完成后立即进入下一阶段。阶段内部仍必须按上文要求调用对应 Comet/OpenSpec/Superpowers skill，被调用的 skill 如有自己的用户决策点，按该 skill 规则执行。
</IMPORTANT>
升级判定
hotfix 的升级判定只决定是否从预设流程转为 full；文件数不自动升级，comet-state scale 只决定验证轻重。
若由 /comet 入口传入 intent frame，hotfix 在 build 前只复核 risk_signal 和升级信号：新增 capability、public API、schema 变更、跨模块协调或深层架构问题。命中时进入现有升级决策点；不得重新实现入口意图识别。
持续检查以下质变信号：跨模块协调修改、需要新增 capability、数据库 schema 变更、引入新的 public API、触及深层架构问题（hotfix 语境下多在根因消除检查时暴露）。命中任一信号时，agent 不得自行升级或自行判定可继续。
文件数 tripwire 仅作提示：改动文件数超过提示阈值（如 > 4 个文件）时，也交给用户决定继续 hotfix 还是升级 full；文件数多不等于质变。bug 修复通常聚焦在 1-3 个文件，超过阈值说明改动面偏大、值得让用户复核是否仍属预设范围。
命中质变信号或文件数 tripwire 时，必须按 comet/reference/decision-point.md 的协议暂停并等待用户明确选择。不得直接进入 /comet-design，不得自动补充 Design Doc。
用户选择升级（选项 B）后，使用状态机合法的升级通道，单条命令完成预设流程 → full 转换并回退到 design 阶段：
node "$COMET_STATE" transition <name> preset-escalate该命令原子地把 workflow/classic_profile 置为 full、phase 回退到 design、清空 design_doc（满足 comet-design 入口要求）。然后在当前 change 基础上补充 Design Doc：立即使用 Skill 工具加载 comet-design skill，后续正常走完整流程。
用户选择继续（选项 A）时，继续 hotfix 流程，并记录用户确认继续的原因。
退出条件
- Bug 已修复，测试通过
- change 已归档
- 如有 spec 变更，已同步到 main spec
- 阶段守卫：build → verify 前运行
node "$COMET_GUARD" <change-name> build --apply，verify → archive 前按/comet-verify规则运行node "$COMET_GUARD" <change-name> verify --apply
自动衔接下一阶段
按 comet/reference/auto-transition.md 执行。关键命令：
node "$COMET_STATE" next <name>NEXT: auto→ 调用SKILL指向的 skill 继续 hotfix 流程（phase: build返回comet-hotfix，verify返回comet-verify，archive返回comet-archive）NEXT: manual→ 不要调用下一 skill，按HINT提示用户手动运行/<SKILL>NEXT: done→ 流程已完成，无需继续
© rpamis, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in eval/local/skills/benchmarks/040-beta/comet-hotfix of rpamis/comet.
Open the folder on GitHubat commit c28e724
Compare with similar skills
Comet Hotfix next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Comet Hotfix this skillrpamis/comet | 3.2k | — | ~1.5k | Automated safety check: Pass | MIT | |
| Orca CLIstablyai/orca | 89k | 2 repos | ~593 | Automated safety check: Pass | MIT | |
| OpenSpec Guided OnboardingFission-AI/OpenSpec | 72k | 1 repos | ~4.5k | Automated safety check: Pass | MIT | |
| Brainstormingobra/superpowers | 297k | 1 repos | ~2.5k | Automated safety check: Pass | MIT | |
| Claude Code Plugin Structureanthropics/claude-plugins-official | 38k | 10 repos | ~3.4k | Automated safety check: Pass | Apache-2.0 | |
| Neat-Freak Knowledge CloseoutKKKKhazix/khazix-skills | 21k | — | ~1.9k | Automated safety check: Pass | MIT |
Similar skills
OpenSpec Guided Onboarding
Fission-AI/OpenSpec
Walks you through a complete OpenSpec workflow cycle with narration while doing real work in your codebase.
Brainstorming
obra/superpowers
Makes the agent clarify intent and agree on a design with you before writing any code, scaling the process from a quick spike to a written spec.
- Official
Claude Code Plugin Structure
anthropics/claude-plugins-official
Explains the directory layout, plugin.json manifest and component organization of a Claude Code plugin, including auto-discovery and portable paths.
Neat-Freak Knowledge Closeout
KKKKhazix/khazix-skills
Brings project docs, agent rule files, authorized memory and leftover workspace files back in line with what the code and runtime actually do at the end of a work session.
O2 Review Loop
openobserve/openobserve
Splits a change into planner, coder and independent reviewer roles: you confirm a spec, a subagent implements it, and a separate reviewer checks each round's local WIP commit.
More from rpamis/comet
All 52 skills in this repoComet
rpamis/comet
A skill your agent uses when 用户要启动或恢复 Comet 工作流，需要根据 active change、.comet.yaml、hotfix/tweak 意图路由到对应阶段 Skill。
Comet
rpamis/comet
Comet workflow entry. An agent skill from rpamis/comet.
Comet
rpamis/comet
Comet — OpenSpec + Superpowers dual-star development workflow.
Comet Archive
rpamis/comet
Archive and deliver a Classic change. An agent skill from rpamis/comet.
Comet Classic
rpamis/comet
Comet Classic workflow entry. An agent skill from rpamis/comet.
Comet Design
rpamis/comet
Complete the Classic technical design and obtain user confirmation.
Related
Categories
Questions about Comet Hotfix
What does Comet Hotfix do?
A skill your agent uses when 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow。. Comet Hotfix is an agent skill from rpamis/comet.
When should I use Comet Hotfix?
Comet Hotfix fits situations like: 用户要修复已有行为 bug，且不新增 capability、不需要完整设计；也用于恢复 hotfix workflow.
How do I install Comet Hotfix in Claude Code?
Run `npx skills add rpamis/comet --skill comet-hotfix -a claude-code`. Or copy the skill folder (eval/local/skills/benchmarks/040-beta/comet-hotfix in rpamis/comet) into .claude/skills/comet-hotfix in your project. Claude Code loads it when a task matches its description.
How do I install Comet Hotfix in Codex?
Run `npx skills add rpamis/comet --skill comet-hotfix -a codex`. Or copy the skill folder (eval/local/skills/benchmarks/040-beta/comet-hotfix in rpamis/comet) into .agents/skills/comet-hotfix in your project. Codex loads it when a task matches its description.
Can I use Comet Hotfix in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add rpamis/comet --skill comet-hotfix -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/comet-hotfix, .gemini/skills/comet-hotfix, .github/skills/comet-hotfix and .opencode/skills/comet-hotfix in your project.
What does Comet Hotfix need to run?
Going by SKILL.md and its folder, Comet Hotfix needs the command-line tools its instructions call (node, mvn and npm).
Does Comet Hotfix access the network?
SKILL.md contains no URLs. Its commands use npm, which can reach the network depending on how they are called. This is read from the text; nothing was executed.
Is Comet Hotfix safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Comet Hotfix use?
Comet Hotfix is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Comet Hotfix use?
About 1.5k tokens (SKILL.md is roughly 5.8k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Comet Hotfix?
Skills that share tags, products or a category with Comet Hotfix: Orca CLI (stablyai/orca, 89k stars), OpenSpec Guided Onboarding (Fission-AI/OpenSpec, 72k stars), Brainstorming (obra/superpowers, 297k stars) and Claude Code Plugin Structure (anthropics/claude-plugins-official, 38k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Comet Hotfix?
rpamis (a GitHub organization) maintains it in rpamis/comet, which has 3,172 GitHub stars. The repository holds 52 skills in this directory. The repository was last updated on October 9, 2026.
Source: rpamis/comet on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.