Subspace Builds
dallison/subspace
Build and test Subspace across supported platforms and build systems.
Xilinx 全工具链综合助手，覆盖从零到一的完整 FPGA/MPSoC 工程构建，包括： - Vivado：硬件设计、Block Design、IP 配置、XDC 约束、综合实现、比特流生成 - Vitis HLS：C/C++ 高层次综合，生成自定义 IP 核 - Vitis Unified IDE（2022.x+）：嵌入式软件开发，Platform/Domain/Application…
Install Xilinx Suite
$ npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install QingquanYao/xilinx-skill xilinx-suite --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/QingquanYao/xilinx-skill.git skills-src && mkdir -p .claude/skills && cp -r skills-src/plugins/xilinx-suite/skills/xilinx-suite .claude/skills/xilinx-suite && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "xilinx-suite" agent skill from https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suite into .claude/skills/xilinx-suite/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "xilinx-suite", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suiteType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install QingquanYao/xilinx-skill xilinx-suite --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/QingquanYao/xilinx-skill.git skills-src && mkdir -p .agents/skills && cp -r skills-src/plugins/xilinx-suite/skills/xilinx-suite .agents/skills/xilinx-suite && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "xilinx-suite" agent skill from https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suite into .agents/skills/xilinx-suite/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "xilinx-suite", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install QingquanYao/xilinx-skill xilinx-suite --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/QingquanYao/xilinx-skill.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/plugins/xilinx-suite/skills/xilinx-suite .cursor/skills/xilinx-suite && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "xilinx-suite" agent skill from https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suite into .cursor/skills/xilinx-suite/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "xilinx-suite", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/QingquanYao/xilinx-skill.git --path plugins/xilinx-suite/skills/xilinx-suite--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install QingquanYao/xilinx-skill xilinx-suite --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/QingquanYao/xilinx-skill.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/plugins/xilinx-suite/skills/xilinx-suite .gemini/skills/xilinx-suite && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "xilinx-suite" agent skill from https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suite into .gemini/skills/xilinx-suite/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "xilinx-suite", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install QingquanYao/xilinx-skill xilinx-suiteInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/QingquanYao/xilinx-skill.git skills-src && mkdir -p .github/skills && cp -r skills-src/plugins/xilinx-suite/skills/xilinx-suite .github/skills/xilinx-suite && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "xilinx-suite" agent skill from https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suite into .github/skills/xilinx-suite/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "xilinx-suite", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install QingquanYao/xilinx-skill xilinx-suite --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/QingquanYao/xilinx-skill.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/plugins/xilinx-suite/skills/xilinx-suite .opencode/skills/xilinx-suite && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "xilinx-suite" agent skill from https://github.com/QingquanYao/xilinx-skill/tree/main/plugins/xilinx-suite/skills/xilinx-suite into .opencode/skills/xilinx-suite/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "xilinx-suite", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
xilinx-suite- GitHub stars
- 466
- Token cost
- ~1.5k tokens
- SKILL.md length
- 253 words
- Files
- 1
- Skills in repo
- 1
- Repo updated
- First seen
- Licence
- None found
At a glance
Xilinx 全工具链综合助手，覆盖从零到一的完整 FPGA/MPSoC 工程构建，包括： - Vivado：硬件设计、Block Design、IP 配置、XDC 约束、综合实现、比特流生成 - Vitis HLS：C/C++ 高层次综合，生成自定义 IP 核 - Vitis Unified IDE（2022.x+）：嵌入式软件开发，Platform/Domain/Application…
- Works in 3 steps: 目标器件/开发板：完整 part number 或板型（由用户提供） → Vivado/Vitis 版本（如 2023.2、2024.1） → 设计目标：这个工程要实现什么功能？
- Tasks that involve gRPC and Protobuf
- SKILL.md covers 第一步：判断工具和流程, 第二步：需求确认（必须先做）, 第三步：按工具流程执行 and 输出规范, plus 3 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Xilinx Suite is an agent skill from QingquanYao/xilinx-skill. Xilinx 全工具链综合助手，覆盖从零到一的完整 FPGA/MPSoC 工程构建，包括： - Vivado：硬件设计、Block Design、IP 配置、XDC 约束、综合实现、比特流生成 - Vitis HLS：C/C++ 高层次综合，生成自定义 IP 核 - Vitis Unified IDE（2022.x+）：嵌入式软件开发，Platform/Domain/Application 创建，XSCT 脚本 - PetaLinux：嵌入式 Linux 系统构建，BSP 配置，内核/rootfs 定制，启动镜像生成 - 器件支持：Zynq UltraScale+ MPSoC（EG/EV 全系及 ZCU10x 评估板）、Versal、纯 FPGA（UltraScale+/UltraScale/7 系列） 只要用户提到以下任何内容，请立即使用本 skill： vivado、vitis、hls、高层次综合、vitishls、petalinux、zynq、ultrascale、fpga、mpsoc、xsa、比特流、 block…
Its SKILL.md is about 1.5k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Backend & APIs, covering gRPC and Protobuf. It works with gRPC, Linux and C++. The repository describes itself as: Xilinx/AMD FPGA & MPSoC Vivado design skill for Claude — covers block design, IP config, XDC constraints, synthesis, implementation and bitstream generation.
When your agent uses it
- Tasks that involve gRPC and Protobuf
Example prompts
- “/xilinx-suite”
Requirements
- Python 3
Workflow steps
3 steps, taken from the first numbered list in SKILL.md.
- 目标器件/开发板：完整 part number 或板型（由用户提供）
- Vivado/Vitis 版本（如 2023.2、2024.1）
- 设计目标：这个工程要实现什么功能？
What it can do on your machine
Read from SKILL.md and the folder at commit ccffd37. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Xilinx Suite loads about 1.5k tokens when it runs. Until then it costs about 187 tokens; SKILL.md has 253 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Without a licence we can't republish the file, so here is its outline and opening line. It has 253 words (~1,478 tokens).
- name
- xilinx-suite
Files
Just SKILL.md in plugins/xilinx-suite/skills/xilinx-suite of QingquanYao/xilinx-skill.
Open the folder on GitHubat commit ccffd37
Compare with similar skills
Xilinx Suite next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Xilinx Suite this skillQingquanYao/xilinx-skill | 466 | — | ~1.5k | Automated safety check: Pass | None | |
| Subspace Buildsdallison/subspace | 104 | — | ~990 | Automated safety check: Pass | Apache-2.0 | |
| Compileapache/skywalking-nodejs | 180 | — | ~1.3k | Automated safety check: Pass | Apache-2.0 | |
| Build Compiled ExtensionsA-EVO-Lab/a-evolve | 809 | — | ~416 | Automated safety check: Pass | None | |
| Doca Flow Grpc ServerNVIDIA/skills | 3.6k | — | ~4.2k | Automated safety check: Pass | Apache-2.0 | |
| Setup Cpu Proxy Serverdrawthingsai/draw-things-community | 584 | — | ~3.8k | Automated safety check: Pass | GPL-3.0 |
Similar skills
Compile
apache/skywalking-nodejs
Compile / build / type-check the skywalking-nodejs agent. An agent skill from apache/skywalking-nodejs.
Build Compiled Extensions
A-EVO-Lab/a-evolve
How to build C/C++/Cython/Fortran extensions and frameworks like Caffe, OpenCV, protobuf-dependent projects from source.
- Official
Doca Flow Grpc Server
NVIDIA/skills
PLAINTEXT-ONLY: the shipped docaflowgrpc server uses grpc::InsecureServerCredentials() with NO TLS / mTLS / token-auth knob on the binary — transport security must come from external infrastructure…
Setup Cpu Proxy Server
drawthingsai/draw-things-community
Set up and verify a new Draw Things CPU proxy and Envoy server using the scripts in Scripts/ServerManagement/CPUScript.
Use Yaak
mountain-loop/yaak
A skill your agent uses when the user mentions Yaak, a Yaak workspace, or the yaak command, or asks to call, hit, or smoke test HTTP/REST endpoints, save or organize API requests for reuse or manual…
Related
Categories
Questions about Xilinx Suite
What does Xilinx Suite do?
Xilinx 全工具链综合助手，覆盖从零到一的完整 FPGA/MPSoC 工程构建，包括： - Vivado：硬件设计、Block Design、IP 配置、XDC 约束、综合实现、比特流生成 - Vitis HLS：C/C++ 高层次综合，生成自定义 IP 核 - Vitis Unified IDE（2022.x+）：嵌入式软件开发，Platform/Domain/Application…. Xilinx Suite is an agent skill from QingquanYao/xilinx-skill.
When should I use Xilinx Suite?
Xilinx Suite fits situations like: tasks that involve gRPC and Protobuf.
How do I install Xilinx Suite in Claude Code?
Run `npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a claude-code`. Or copy the skill folder (plugins/xilinx-suite/skills/xilinx-suite in QingquanYao/xilinx-skill) into .claude/skills/xilinx-suite in your project. Claude Code loads it when a task matches its description.
How do I install Xilinx Suite in Codex?
Run `npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a codex`. Or copy the skill folder (plugins/xilinx-suite/skills/xilinx-suite in QingquanYao/xilinx-skill) into .agents/skills/xilinx-suite in your project. Codex loads it when a task matches its description.
Can I use Xilinx Suite in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add QingquanYao/xilinx-skill --skill xilinx-suite -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/xilinx-suite, .gemini/skills/xilinx-suite, .github/skills/xilinx-suite and .opencode/skills/xilinx-suite in your project.
What does Xilinx Suite need to run?
SKILL.md names no scripts, command-line tools or credentials: Xilinx Suite is instructions for the agent only. Our summary lists: Python 3.
Does Xilinx Suite access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Xilinx Suite safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Xilinx Suite use?
No licence was found for Xilinx Suite or its repository. Without one, default copyright applies: ask the author before reusing or redistributing it.
How many tokens does Xilinx Suite use?
About 1.5k tokens (SKILL.md is roughly 5.9k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Xilinx Suite?
Skills that share tags, products or a category with Xilinx Suite: Subspace Builds (dallison/subspace, 104 stars), Compile (apache/skywalking-nodejs, 180 stars), Build Compiled Extensions (A-EVO-Lab/a-evolve, 809 stars) and Doca Flow Grpc Server (NVIDIA/skills, 3.6k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Xilinx Suite?
QingquanYao (a GitHub user) maintains it in QingquanYao/xilinx-skill, which has 466 GitHub stars. The repository was last updated on April 25, 2026.
Source: QingquanYao/xilinx-skill on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.