Agent skill

Test Result Feedback

by Prismer-AI in Prismer-AI/PrismerCloud

Close the acceptance loop for a tested change — consume the apc test TierResult, map EACH acceptance criterion to a pass/fail outcome from structured fields (never chat text), attach an evidence…

MITAuto-check: notes

Install Test Result Feedback

skills CLI
$ npx skills add Prismer-AI/PrismerCloud --skill test-result-feedback -a claude-code

Project install by default; add -g for ~/.claude/skills/.

GitHub CLI
$ gh skill install Prismer-AI/PrismerCloud test-result-feedback --agent claude-code

Project scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).

Manual copy
$ git clone --depth 1 https://github.com/Prismer-AI/PrismerCloud.git skills-src && mkdir -p .claude/skills && cp -r skills-src/sdk/apc/skills/test-result-feedback .claude/skills/test-result-feedback && rm -rf skills-src

Use ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.

Claude Code skills documentation · loads skills from .claude/skills/

Facts

Skill name
test-result-feedback
GitHub stars
1.6k
Token cost
~2.7k tokens
SKILL.md length
755 words
Files
2
Skills in repo
88
Repo updated
First seen
Licence
MIT

At a glance

Close the acceptance loop for a tested change — consume the apc test TierResult, map EACH acceptance criterion to a pass/fail outcome from structured fields (never chat text), attach an evidence…

  • Works in 5 steps: 先落调用回执(见文末 ACK 块),再取本 task 的 criterion 清单 → 跑/取本轮 TierResult → 逐 criterion 判定 + 挂证据回写 → …
  • SKILL.md covers 工具契约(签名以此为准,先核后用), TierResult 字段(以…, Decision table(TierResult → 每条… and Workflow, plus 5 more sections
  • Calls npx and rg

What it does

Test Result Feedback is an agent skill from Prismer-AI/PrismerCloud. Close the acceptance loop for a tested change — consume the apc test TierResult, map EACH acceptance criterion to a pass/fail outcome from structured fields (never chat text), attach an evidence ref, and write it back to the task. A SUT red is a finding, never softened to green.

Its SKILL.md is about 2.7k tokens, which your agent loads only when the skill is triggered. The skill folder holds 1 other file (for example `skill.json`). Compatibility notes: ["claude-code"]

The licence is MIT.

Example prompts

  • “/test-result-feedback”

Requirements

  • Node.js
  • Compatibility (from SKILL.md): ["claude-code"]
  • Pre-approved tools (allowed-tools): Bash

Workflow steps

5 steps, taken from the step headings in SKILL.md.

  1. 先落调用回执(见文末 ACK 块),再取本 task 的 criterion 清单
  2. 跑/取本轮 TierResult
  3. 逐 criterion 判定 + 挂证据回写
  4. 回读确认落库
  5. 整轮结果回流 cockpit(apc/05 §1 C2 的另一半)

What it can do on your machine

Read from SKILL.md and the folder at commit e5d9444. It shows what the files ask for, not the result of running them.

  • Tool permissions

    Pre-approves these tools, so the agent can use them without asking each time:

    • Bash

    From allowed-tools in the SKILL.md frontmatter.

  • Runs code

    Shell commands in SKILL.md call:

    • npx
    • rg

    From the folder's file list and the shell code blocks in SKILL.md.

  • Network

    No URLs in SKILL.md. Its commands use npx, which can reach the network depending on how they are called.

    From URLs in SKILL.md, links to its own repository left out.

  • Credentials

    Names no API keys, tokens, secrets or passwords.

    From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.

  • Compatibility

    ["claude-code"]

    From compatibility in the SKILL.md frontmatter.

Context cost

Test Result Feedback loads about 2.7k tokens when it runs. Until then it costs about 75 tokens; SKILL.md has 755 words of instructions outside code blocks.

Always · name and description, kept in context so the agent knows when to use it
~75
When it runs · the whole SKILL.md, loaded when a task matches
~2.7k

Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.

Safety

Auto-check: notes

The automated check noted patterns worth knowing about, such as sudo or a known installer.

  • NotePre-approves every shell command (allowed-tools: Bash)SKILL.md
    allowed-tools: Bash

Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.

SKILL.md

The full file from Prismer-AI/PrismerCloud at commit e5d9444, republished under its MIT licence (© Prismer-AI). 755 words, ~2,681 tokens.

Download SKILL.mdSave it as .claude/skills/test-result-feedback/SKILL.md (or your agent's skills folder). This skill also uses 1 other file; get the full folder from GitHub.
name
test-result-feedback
description
Close the acceptance loop for a tested change — consume the apc test TierResult, map EACH acceptance criterion to a pass/fail outcome from structured fields (never chat text), attach an evidence ref, and write it back to the task. A SUT red is a finding, never softened to green.
allowed-tools
Bash
compatibility
["claude-code"]
license
MIT
scope
coding
metadata.category
testing

test-result-feedback

把 apc test 的 TierResult 回流成 task 每条验收 criterion 的 结构化判定 + 证据(apc/05 C2 · S5b)。这是「测试→回流」的后半段:test-runner 负责选层跑并把新增红报回一条 criterion;本 skill 负责把一轮 TierResult 摊到 task 的每一条 criterion 上,逐条 passed/failed/n/a 落库并挂证据 ref,喂给循环级视图(cockpit 用 task metadata loopId 聚合,不建 loop 实体)。

承重纪律(本 skill 存在的唯一理由):红是一个发现,不是要修绿的对象。 TierResult 里一条 SUT 红 → 对应 criterion 必须报 failed 并附失败证据;绝不因为"就差一点"或"看起来还行"把红判成 passed。把断言放松到红能过 = 作废(CLAUDE.md 验收纪律 §3)。判定只取自 TierResult 的结构字段(exitCode/failedNames/regressions[]/pass 计数),绝不取自 agent 自己的聊天叙述——文本会冒充证据。

什么时候用:一个 coding task 跑完测试(test-runner 产出或 apc test --json),需要把这轮结果逐 criterion 落回 task 的验收账、并留下可回读的证据 ref。

工具契约(签名以此为准,先核后用)

命令作用退出码
apc test [--tier=T0,T1] [--diff] [--json]全层测试编排(包装 scripts/test203/run.ts),产出 TierResult0 绿 · 1 SUT 红/回归 · 2 用法错 · 78 env_blocked
cloud task verify-criterion <task-id> <criterion-id> --outcome <passed|failed|n/a|waived> [--evidence <ref>...] [--note <md>]把一条 criterion 的判定 + 证据报回 task0 成功
cloud task acceptance <task-id>读回 acceptance-view(回读确认 criterion 落库)0 成功
  • --outcome 合法值恰好四个:passed / failed / n/a / waived(其它值 CLI 直接报错)。
  • --evidence <ref> 可重复,取值形如 taskRun:<runId> / asset:<id> / url:...——把这轮 TierResult 的可追溯锚挂上去(典型:把 apc test --json 产物 cloud asset upload 成 asset 后引 asset:<id>,或引 dispatch 的 taskRun:<id>)。报 failed 必须带证据,否则就是空口判红。
  • --note 是自由 markdown:写清判定方法 + 失败用例名(failedNames)+ 复现指令。

TierResult 字段(以 FIELD-DICTIONARY.md 为准,别照抽象词猜)

apc test --json stdout 顶层:{ schema, doctor, envStatus, tiers:[...], regressions:[...], fixed:[...], exitCode }。

  • exitCode:整轮退出码(0 绿 / 1 SUT 红(--diff 下=新增红)/ 78 env_blocked)。
  • regressions[]:新增红 vs baseline(跨所有层并集)——判"回归"只看它,baseline 已知红不算本轮的红。
  • 每个 tiers[](TierResult):{ tier, passed, failed, skipped, total, failedNames:[...], skippedNames, regressions, envStatus, durationMs }(是 failedNames 驼峰;command/exitCode 在顶层不在每层)。

Decision table(TierResult → 每条 criterion 的 outcome)

对 task 的每一条 criterion,按它断言的对象在 TierResult 里查证:

TierResult 事实criterion 该报的 outcome
该 criterion 覆盖的用例全绿(不在任何 failedNames,不在 regressions[])passed(附 --evidence taskRun:...)
该 criterion 覆盖的用例进了 regressions[](新增红)failed(附 failedNames + evidence,不得软化)
该 criterion 覆盖的用例在 failedNames 但命中 baseline 已知红(非新增)failed 如实报 + note 标"baseline 已知红非本轮回归"(仍是红,不粉饰);是否 baseline 漂移另查,不放松本条
顶层 exitCode=78(env_blocked)不判 failed——环境没跑起来,报环境故障域,criterion 维持 pending,绝不把 env_blocked 计成 SUT 红
criterion 与本轮 tier 无关(未覆盖)n/a(说明为何不适用,不硬凑绿)

flaky 辨伪(字段字典 §并行 flaky):regressions[] 出现新面孔红 → 单独重跑该文件确认;单跑绿=flaky(note 记录,不判 failed);单跑仍红=真回归(如实 failed)。flaky 签名=重跑红集合漂移;真回归签名=稳定复现同一批。

Workflow

1. 先落调用回执(见文末 ACK 块),再取本 task 的 criterion 清单
bash
cloud task acceptance "$PRISMER_TASK_ID"    # 拿每条 criterion 的 id + label + 当前 status(多为 pending)
2. 跑/取本轮 TierResult

若尚无产物,按改动面选层跑(选层规则见 test-runner skill):

bash
npx tsx sdk/apc/bin/apc.ts test --tier=T0,T1 --diff --json > /tmp/apc-test.json; T=$?
echo "apc test exit=$T"

若上游已有产物,直接读它——但产物必须是本轮真跑的,不许拿旧 probe 当证据。

3. 逐 criterion 判定 + 挂证据回写

从 /tmp/apc-test.json 读结构字段,对第 1 步每条 criterion 按 Decision table 定 outcome,逐条上报(一条一命令):

bash
# 绿:附可追溯锚
cloud task verify-criterion "$PRISMER_TASK_ID" "<criterion-id>" --outcome passed \
  --evidence "taskRun:$PRISMER_TASK_RUN_ID" \
  --note "apc test T0,T1 green; covered cases not in failedNames/regressions"

# 红:附失败用例名 + 证据,绝不软化
cloud task verify-criterion "$PRISMER_TASK_ID" "<criterion-id>" --outcome failed \
  --evidence "taskRun:$PRISMER_TASK_RUN_ID" \
  --note "T1 new reds vs baseline: <failed-name-1>,<failed-name-2>"

(可选:cloud asset upload /tmp/apc-test.json 拿 asset:<id>,再 --evidence asset:<id> 把整份 TierResult 挂成 criterion 的持久证据。)

4. 回读确认落库
bash
cloud task acceptance "$PRISMER_TASK_ID"    # 每条 criterion status 应从 pending → 你报的 outcome,evidence 非空
5. 整轮结果回流 cockpit(apc/05 §1 C2 的另一半)

第 3 步是逐 criterion回流;这一步是整轮回流——把同一份 /tmp/apc-test.json 摊平成一条 test_result_feedback task-event,喂给 insights-cockpit.service.ts::getAcceptanceFeedback 的 acceptanceFeedback 面板(此前这个 reader 一直有读无写,面板恒空):

bash
cloud task test-feedback "$PRISMER_TASK_ID" /tmp/apc-test.json

不带文件参数时从 stdin 读,可以直接接编排命令的输出:

bash
npx tsx sdk/apc/bin/apc.ts test --tier=T0,T1 --diff --json | cloud task test-feedback "$PRISMER_TASK_ID"

映射规则(与第 3 步的 Decision table 保持同一条纪律——env_blocked 绝不算 SUT 红):

TierResult 事实test-feedback 上报的 status
顶层 envStatus==='env_blocked' 或 exitCode===78env_blocked(绝不映射成 failed——环境没跑起来,不是产品红)
上面都不成立且 exitCode===0passed
其余(exitCode 非 0 且非 env_blocked)failed

payload.tiers 取自顶层 tiers[],每项落 {tier, passed, failed, skipped, total};payload.failureCount 是每层 failed 的和;exitCode / regressions[] 原样透传,供 cockpit 之后细分。同样只有该 task 的 assignee 能报(非 assignee 报会 403 / CLI 退出 4),与第 1 步的 cloud skill ack 是同一条鉴权。

Failure / escalate

  • 顶层 exitCode=78 → 环境没起来。报环境故障域(infra/toolchain),不碰 criterion,交给 env-doctor。
  • criterion 与任何已跑 tier 都对不上 → 报 n/a + 说明,别硬判绿;缺 tier 覆盖是一个发现。
  • 判据模糊到无法从结构字段确定 → 停手 escalate(留 /tmp/apc-test.json),绝不猜一个绿。
Show full SKILL.md (336 more words)Show less

输出契约(机器判据按这个复验,别自由发挥格式)

旧判据是「正文里出现过 failedNames/regressions/--json 这几个词」——一篇没跑过 apc test、字段名全靠背的报告照样满分,而且字段名记错也照绿(doc12 实测到的漂移:TierResult 根本没有 command 字段,但 doc 写了、判据也不在乎)。现在判据(cited-evidence)把报告里每条 path:line 读回磁盘复核,并要求你把消费的字段名钉到真实产出方的真实行上。

⚠️ 但 cited-evidence 管不到本 skill 最承重的那件事(2026-07-26 实测坐实):把一份逐字真实、引用全对的报告里两条真红改判 passed,其余一个字不动 —— 旧的 7 条判据给 7/7 全绿。引用真实性与 outcome 真实性是两回事,而本 skill 存在的唯一理由恰恰是后者。故新增下面的 ③(json-claim,与 test-runner 同一 checker),把「红不软化」「env_blocked 不计产品红」两条纪律从措辞检查升级为机器判据。

① 字段锚点声明(一行;符号会被复核确实出现在该文件里):

CHANGE-POINT: failedNames @ scripts/test203/run.ts

scripts/test203/run.ts 是 TierResult JSON 的真实产出方(apc test 只是包装它)。开工先取证据集:

bash
rg -n failedNames scripts/test203/run.ts     # 你的证据集;表里的引用从这份输出里抄

② 映射表(markdown 表,首列是 path:line):每行把一条 criterion 类别映射到 outcome,并用一条真实命中行把该行的依据钉住。判据要求:≥3 行带可复核引用,且**≥2 条引用所在的那一行真的含 failedNames**("真实存在的行" ≠ "真实的搜索命中")。

| path:line | criterion-class | TierResult fact | outcome | evidence ref |
| --- | --- | --- | --- | --- |
| scripts/test203/run.ts:344 | 覆盖用例全绿 | 不在 failedNames / regressions[] | passed | taskRun:<id> |
| scripts/test203/run.ts:382 | 覆盖用例进 regressions[] | 新增红 vs baseline | failed | asset:<id> |

引用写法三条(判据按这个复核,写错会把如实的报告判红):

  1. 必须 repo-root-relative:写 scripts/test203/run.ts:344,不要写简写 test203/run.ts:344,也不要写绝对路径。
  2. 计数不是行号:rg -c 输出的 path:12 是"12 个命中",要引用就写 count=12。
  3. 散文里出现的 path:line 一样会被复核——报告里任何一处 path:line 都是一次声明;贴失败堆栈时注意里面的相对 file.ts:line 也算数。

这条判据管的是「你消费的字段名是真的、你的映射依据可回溯」,不替代下面的落库 oracle——outcome 是否真落库仍以 cloud task acceptance 回读为准。

③ 原始产物 + 两行判定声明(json-claim 复核;这条是本 skill 的承重判据)

把你消费的那份 TierResult 原样贴进一个 fenced JSON 块(就是 apc test --json 的 stdout,别摘录、别改写),checker 会重新解析它,然后核对下面两行:

TIER-EXIT: 1
FEEDBACK-VERDICT: sut-red
  • TIER-EXIT 必须逐字等于产物里的 exitCode。叙述与产物对不上即红。

  • FEEDBACK-VERDICT 不是你的判断,是从 exitCode 派生的,只有三个合法值:

    exitCode唯一合法的 FEEDBACK-VERDICT它挡住的事
    0all-covered-criteria-passed—
    1sut-red把真红叙述成绿(本 skill 的头号禁令)
    78env-blocked把环境故障冤枉成 SUT 红

    写 1 却声明 all-covered-criteria-passed ⇒ 红。写 78 却声明 sut-red ⇒ 红。这两条以前只是正文里有没有出现「不软化」「env_blocked」这些词,现在是算术。

同时被复核的还有:schema 必须是 test203.run/v1;exitCode ∈ {0,1,78}、envStatus ∈ {ok,env_blocked};每层 passed+failed+skipped == total 且 failedNames.length == failed(per-tier 算术);exitCode=78 ⇒ envStatus='env_blocked'、exitCode=0 ⇒ regressions 为空(exit-code 契约)。

诚实边界(沿用 json-claim 自己的声明):一个肯读 baseline 与 tier 清单的伪造者,仍能手工拼出一份自洽产物——没有任何本地工件是不可伪造的。这条判据杀掉的是廉价伪造(编数字、叙述压过产物、拿旧产物冒充本轮),与其余 checker 同一档次。逐 criterion 是否真落库,仍以 cloud task acceptance 回读为准,判据不替代它。

产出(副作用 oracle,报告里必须给)

  1. 每条 criterion 的落库 outcome 行:cloud task acceptance 回读,status 从 pending → 上报值(passed/failed/n/a),这是真值——不是 agent 说"我报了"。
  2. 证据 ref 已挂:每条报出的 criterion 带非空 evidence(taskRun: / asset:),可回溯到本轮 TierResult。
  3. 红如实落红:TierResult 里的 SUT 红对应的 criterion 是 failed(不是被软化成 passed)。

不许:把 SUT 红判成 passed(红是发现)· 把 env_blocked(exit 78)计成 SUT 红 · 断言聊天文本而非 TierResult 结构字段 · 空口判绿(passed 无证据 ref)· 拿旧 probe/上一轮产物冒充本轮证据。

PKF 直写(研发回环 · doc07 §B2 写入点①)

产出时机:逐 criterion 回流落库后,把这轮 TierResult 的结论直写成一张 PKF 记忆页(pageType=decision)——同一页既是回用户侧的富报告,也是可召回的记忆页。这与经验抽取(durable 教训走 memory skill 的 CONSTRUCT→PLACE→WRITE)是并存的两条边,不互相取代(doc07 §B1)。这条直写不改上面逐 criterion 回流的任何一步,是回流之后的一次投影。

语法照 pkf-writing skill——本 skill 不再内嵌语法骨架(frontmatter / typed link / 数据块写法都在那边)。写入面不新造:code agent 走 prismer memory write(SS-14 §4.3 appendix;hermes 侧是 native memory_write)。

声明(doc10 §2.5 格式,报告末尾一行):

PKF: prismer://workspace/<ws>/memory/<path>

写入面不可达时如实声明 PKF: none — 写入面不可达(<哪一条>),绝不允许为了满足规则而假装写了。

回读:声明后必须回读该页(pkf_read / memory read),确认真实存在、正文非空且与结论一致(contradicts 只在本轮结论推翻了某条既有决策时才加,指向那条决策页);typed link 的 prismer:// 目标必须真实存在(validator 规则 2c/4 挡 invalid-prismer-host),无对应页就删该 link 行、宁缺勿造伪目标;写入自动挂 INDEX 反孤儿锚(SS-14 §4.2),优先 edit 既有页而非 dump 新叶(PLACE 治理照走)。

<!-- APC-ACK:v1 -->

调用回执(APC 平台方运营纪律 · 自动注入,勿手改)

执行本 skill 的第一步,先落一条调用回执:

bash
cloud skill ack test-result-feedback --task "$PRISMER_TASK_ID"

按退出码分流(这条命令的退出码是承重信息,禁止用 || 兜底、; true、 set +e 或重定向把它抹掉):

exit含义你要做的
0回执已落库(im_task_logs.action='skill_ack')继续执行本 skill
3无 task 上下文——本次运行没有 task,产不出回执继续执行本 skill;但本次运行没有回执,任何报告里都不得声称已 ack
4你不是该 task 的 assignee,服务端拒绝停下并上报:回执只能由执行该 task 的 agent 产生
1其它失败(网络 / 服务端)重试一次;仍失败则继续执行,并在结果里显式标注「回执缺失」

回执只证明本 skill 被调度,不证明执行正确——效果证明由本 skill 自己的 acceptanceCriteria 副作用断言承担(apc/04 §2 层 1 诚实标注)。

<!-- /APC-ACK:v1 -->

© Prismer-AI, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file

Files

SKILL.md and 1 other file in sdk/apc/skills/test-result-feedback of Prismer-AI/PrismerCloud.

  • SKILL.md
  • skill.json

Open the folder on GitHubat commit e5d9444

Compare with similar skills

Test Result Feedback next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.

Test Result Feedback compared with similar skills
SkillStarsUsed inTokensAuto-checkLicenceRepo updated
Test Result Feedback this skillPrismer-AI/PrismerCloud1.6k—~2.7kAutomated safety check: NotesMIT
Fsharp Testingaffaan-m/ECC276k1 repos~2kAutomated safety check: PassMIT
Csharp Testingaffaan-m/ECC276k1 repos~2.2kAutomated safety check: PassMIT
React Testingaffaan-m/ECC276k1 repos~3.3kAutomated safety check: PassMIT
Studio Testingsupabase/supabase111k—~2.2kAutomated safety check: PassApache-2.0
LobeHub Testing Guidelobehub/lobehub83k—~1.6kAutomated safety check: PassCustom licence

Similar skills

  • Fsharp Testing

    affaan-m/ECC

    F testing patterns with xUnit, FsUnit, Unquote, FsCheck property-based testing, integration tests, and test organization best practices.

    276k GitHub starsUsed in 1 repo~2k tokens
    Testing & QAAuto-check passed
  • Csharp Testing

    affaan-m/ECC

    C and .NET testing patterns with xUnit, FluentAssertions, mocking, integration tests, and test organization best practices.

    276k GitHub starsUsed in 1 repo~2.2k tokens
    Testing & QAAuto-check passed
  • React Testing

    affaan-m/ECC

    React component testing with React Testing Library, Vitest/Jest, MSW for network mocking, accessibility assertions with axe, and the decision boundary between component tests and Playwright/Cypress…

    276k GitHub starsUsed in 1 repo~3.3k tokens
    Testing & QAAuto-check passed
  • Studio Testing

    supabase/supabase

    Official

    Testing strategy for Supabase Studio. An agent skill from supabase/supabase.

    111k GitHub stars~2.2k tokensUpdated today
    Testing & QAAuto-check passed
  • LobeHub Testing Guide

    lobehub/lobehub

    Explains how to write and run Vitest tests in the LobeHub monorepo: single-file commands, mocking rules, database model tests and regression tests for fixes.

    83k GitHub stars~1.6k tokensUpdated today
    Testing & QAAuto-check passed
  • Testing

    redis/RedisInsight

    Official

    Unit/integration testing standards for RedisInsight using Jest and Testing Library: test structure, the renderComponent helper, faker for test data, mocking patterns, and waitFor instead of fixed…

    8.9k GitHub stars~3.3k tokensUpdated 5 days ago
    Testing & QAAuto-check passed

More from Prismer-AI/PrismerCloud

All 88 skills in this repo
  • Prismer Google Workspace

    Prismer-AI/PrismerCloud

    Gives an agent account-scoped access to Gmail, Calendar, Drive, Contacts, Docs and Sheets through the gws CLI or a bundled Python client.

    1.6k GitHub starsUsed in 3 repos~4.2k tokens
    Auto-check passed
  • Prismer Skill Creator

    Prismer-AI/PrismerCloud

    Walks an agent through creating, importing, editing, validating, testing and publishing Prismer Skills with a fixed workflow and bundled scripts.

    1.6k GitHub stars~2.6k tokensUpdated 10 days ago
    Auto-check: notes
  • Himalaya Email CLI

    Prismer-AI/PrismerCloud

    Operates a mailbox from the terminal with the external Himalaya CLI over IMAP, SMTP, Notmuch or Sendmail, separate from any built-in email gateway adapter.

    1.6k GitHub starsUsed in 2 repos~2.3k tokens
    Auto-check passed
  • Prismer Image Generation

    Prismer-AI/PrismerCloud

    Generates one image from a text prompt with a bundled Node.js helper and delivers it once as the attachment to the current Prismer reply.

    1.6k GitHub stars~1.4k tokensUpdated 10 days ago
    Auto-check passed
  • Manim Explainer Videos

    Prismer-AI/PrismerCloud

    Produces 3Blue1Brown-style explainer animations with Manim Community Edition for math, algorithms, equations and architecture diagrams, with planning and rendering references.

    1.6k GitHub starsUsed in 2 repos~3.1k tokens
    Auto-check passed
  • Prismer Role Builder

    Prismer-AI/PrismerCloud

    Creates or updates Prismer role templates from a persona, SOP or job description, and turns a role into a working agent that runs its first task through a bundled script.

    1.6k GitHub stars~2.3k tokensUpdated 10 days ago
    Auto-check: notes

Questions about Test Result Feedback

What does Test Result Feedback do?

Close the acceptance loop for a tested change — consume the apc test TierResult, map EACH acceptance criterion to a pass/fail outcome from structured fields (never chat text), attach an evidence…. Test Result Feedback is an agent skill from Prismer-AI/PrismerCloud. Close the acceptance loop for a tested change — consume the apc test TierResult, map EACH acceptance criterion to a pass/fail outcome from structured fields (never chat text), attach an evidence ref, and write it back to the task.

How do I install Test Result Feedback in Claude Code?

Run `npx skills add Prismer-AI/PrismerCloud --skill test-result-feedback -a claude-code`. Or copy the skill folder (sdk/apc/skills/test-result-feedback in Prismer-AI/PrismerCloud) into .claude/skills/test-result-feedback in your project. Claude Code loads it when a task matches its description.

How do I install Test Result Feedback in Codex?

Run `npx skills add Prismer-AI/PrismerCloud --skill test-result-feedback -a codex`. Or copy the skill folder (sdk/apc/skills/test-result-feedback in Prismer-AI/PrismerCloud) into .agents/skills/test-result-feedback in your project. Codex loads it when a task matches its description.

Can I use Test Result Feedback in Cursor, Gemini CLI or GitHub Copilot?

Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Prismer-AI/PrismerCloud --skill test-result-feedback -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/test-result-feedback, .gemini/skills/test-result-feedback, .github/skills/test-result-feedback and .opencode/skills/test-result-feedback in your project.

What does Test Result Feedback need to run?

Going by SKILL.md and its folder, Test Result Feedback needs the command-line tools its instructions call (npx and rg). Our summary lists: Node.js. Its frontmatter pre-approves these tools: Bash. Compatibility (from SKILL.md): ["claude-code"].

Does Test Result Feedback access the network?

SKILL.md contains no URLs. Its commands use npx, which can reach the network depending on how they are called. This is read from the text; nothing was executed.

Is Test Result Feedback safe to install?

Our automated static check of SKILL.md found notes only (pre-approves every shell command (allowed-tools: bash)), nothing it rates as a warning. It is not a guarantee. Review the folder before installing.

What licence does Test Result Feedback use?

Test Result Feedback is published under the MIT licence (declared in SKILL.md). It allows redistribution, so the full SKILL.md is shown on this page.

How many tokens does Test Result Feedback use?

About 2.7k tokens (SKILL.md is roughly 11k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.

What are the alternatives to Test Result Feedback?

Skills that share tags, products or a category with Test Result Feedback: Fsharp Testing (affaan-m/ECC, 276k stars), Csharp Testing (affaan-m/ECC, 276k stars), React Testing (affaan-m/ECC, 276k stars) and Studio Testing (supabase/supabase, 111k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.

Who maintains Test Result Feedback?

Prismer-AI (a GitHub organization) maintains it in Prismer-AI/PrismerCloud, which has 1,555 GitHub stars. The repository holds 88 skills in this directory. The repository was last updated on September 30, 2026.

Source: Prismer-AI/PrismerCloud on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.