RuView Hardware Setup
ruvnet/RuView
Brings a RuView CSI sensing node online by building ESP32-S3 or ESP32-C6 firmware, flashing the board, provisioning WiFi and checking the serial output.
Walks a user through putting an AI Desk Card e-ink device on home Wi-Fi so frames arrive in about 0.2 seconds instead of the 32 seconds USB takes.
SKILL.md written in Chinese; this summary is our English description.
Install AI Desk Card Wi-Fi Setup
$ npx skills add op7418/ai-desk-card --skill card-wifi-setup -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install op7418/ai-desk-card card-wifi-setup --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/op7418/ai-desk-card.git skills-src && mkdir -p .claude/skills && cp -r skills-src/plugin/skills/card-wifi-setup .claude/skills/card-wifi-setup && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "card-wifi-setup" agent skill from https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setup into .claude/skills/card-wifi-setup/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "card-wifi-setup", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setupType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add op7418/ai-desk-card --skill card-wifi-setup -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install op7418/ai-desk-card card-wifi-setup --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/op7418/ai-desk-card.git skills-src && mkdir -p .agents/skills && cp -r skills-src/plugin/skills/card-wifi-setup .agents/skills/card-wifi-setup && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "card-wifi-setup" agent skill from https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setup into .agents/skills/card-wifi-setup/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "card-wifi-setup", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add op7418/ai-desk-card --skill card-wifi-setup -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install op7418/ai-desk-card card-wifi-setup --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/op7418/ai-desk-card.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/plugin/skills/card-wifi-setup .cursor/skills/card-wifi-setup && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "card-wifi-setup" agent skill from https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setup into .cursor/skills/card-wifi-setup/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "card-wifi-setup", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/op7418/ai-desk-card.git --path plugin/skills/card-wifi-setup--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add op7418/ai-desk-card --skill card-wifi-setup -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install op7418/ai-desk-card card-wifi-setup --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/op7418/ai-desk-card.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/plugin/skills/card-wifi-setup .gemini/skills/card-wifi-setup && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "card-wifi-setup" agent skill from https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setup into .gemini/skills/card-wifi-setup/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "card-wifi-setup", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install op7418/ai-desk-card card-wifi-setupInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add op7418/ai-desk-card --skill card-wifi-setup -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/op7418/ai-desk-card.git skills-src && mkdir -p .github/skills && cp -r skills-src/plugin/skills/card-wifi-setup .github/skills/card-wifi-setup && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "card-wifi-setup" agent skill from https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setup into .github/skills/card-wifi-setup/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "card-wifi-setup", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add op7418/ai-desk-card --skill card-wifi-setup -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install op7418/ai-desk-card card-wifi-setup --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/op7418/ai-desk-card.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/plugin/skills/card-wifi-setup .opencode/skills/card-wifi-setup && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "card-wifi-setup" agent skill from https://github.com/op7418/ai-desk-card/tree/main/plugin/skills/card-wifi-setup into .opencode/skills/card-wifi-setup/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "card-wifi-setup", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
card-wifi-setup- GitHub stars
- 151
- Token cost
- ~680 tokens
- SKILL.md length
- 226 words
- Files
- 1
- Skills in repo
- 4
- Repo updated
- First seen
- Licence
- Custom licence
At a glance
Walks a user through putting an AI Desk Card e-ink device on home Wi-Fi so frames arrive in about 0.2 seconds instead of the 32 seconds USB takes.
- Works in 4 steps: 跟用户要 SSID + 密码 → 推送 → 等 15-20 秒看结果 → …
- Moving an AI Desk Card from USB to wireless frame updates
- SKILL.md covers 先决条件, 流程, 失败诊断 and 架构提示, plus 1 more section
- Calls bash
What it does
The skill takes the user's Wi-Fi name and password, writes them once to the device's NVS storage through the local daemon, and lets the device join the network and advertise over mDNS. After the daemon restarts and finds it, frames are pushed over Wi-Fi in about 0.2 seconds rather than USB's 32. It assumes the device already talks to the daemon over USB serial or a paired BLE link and that the daemon is running; otherwise the card-onboard flow comes first. Before asking, the agent states that the password stays local and is not written to logs or git or uploaded.
The steps are: collect the SSID, correcting an answer that looks like a MAC address; run the plugin's wifi_setup.sh script with the SSID quoted; wait 15 to 20 seconds and confirm through a probe script or the daemon log that the device connected and reported an IP; then run card-stop and card-start so the daemon rescans mDNS and switches transport. A status table covers SSID not found, authentication failure and DHCP failure. The most common cause is a dual-band router, since the ESP32 cannot use 5GHz and needs a 2.4GHz network. Routers defaulting to WPA3 may need mixed WPA2/WPA3 mode if connections keep failing.
When your agent uses it
- Moving an AI Desk Card from USB to wireless frame updates
- A user asks how to connect the card to their home Wi-Fi
- Diagnosing a device that stays at wifi_connected false
- Switching the daemon to the Wi-Fi transport after provisioning
Example prompts
- “Set up Wi-Fi on my AI Desk Card so it stops relying on USB.”
- “The card still reports wifi_connected false after I gave it my home network password. What is wrong?”
- “我想用无线，帮我给 card 配 wifi。”
Requirements
- An AI Desk Card device the daemon can reach over USB serial or BLE
- The AI Desk Card daemon running
- A 2.4GHz Wi-Fi network
- Pre-approved tools (allowed-tools): Bash, AskUserQuestion
Workflow steps
4 steps, taken from the step headings in SKILL.md.
- 跟用户要 SSID + 密码
- 推送
- 等 15-20 秒看结果
- 重启 daemon 切到 Wi-Fi transport
What it can do on your machine
Read from SKILL.md and the folder at commit dc3b498. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves these tools, so the agent can use them without asking each time:
BashAskUserQuestion
From allowed-tools in the SKILL.md frontmatter.
Runs code
Shell commands in SKILL.md call:
bash
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
AI Desk Card Wi-Fi Setup loads about 680 tokens when it runs. Until then it costs about 89 tokens; SKILL.md has 226 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check: notes
The automated check noted patterns worth knowing about, such as sudo or a known installer.
- NotePre-approves every shell command (allowed-tools: Bash)SKILL.md
allowed-tools: Bash, AskUserQuestion
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Its licence (Custom licence) doesn't allow us to republish the file, so here is its outline and opening line. It has 226 words (~680 tokens).
“把 SSID + 密码喂到设备 NVS，设备自动连，daemon 通过 mDNS 发现 → 后续推帧 0.2 秒到位。”
- name
- card-wifi-setup
- allowed-tools
- Bash, AskUserQuestion
- trigger_keywords
- 配 wifi, 配 wi-fi, card 上 wifi, 卡片连 wifi, 无线连接, wifi setup, card wifi
Files
Just SKILL.md in plugin/skills/card-wifi-setup of op7418/ai-desk-card.
Open the folder on GitHubat commit dc3b498
Compare with similar skills
AI Desk Card Wi-Fi Setup next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| AI Desk Card Wi-Fi Setup this skillop7418/ai-desk-card | 151 | — | ~680 | Automated safety check: Notes | Custom licence | |
| RuView Hardware Setupruvnet/RuView | 97k | — | ~1.8k | Automated safety check: Notes | MIT | |
| Esp32 Firmware Engineeralxv2016/folloup-sticky | 116 | 1 repos | ~3.8k | Automated safety check: Pass | GPL-3.0 | |
| RuView mmWave Radar Setupruvnet/RuView | 97k | — | ~907 | Automated safety check: Notes | MIT | |
| Embedded DebugFastLED/FastLED | 7.5k | — | ~1.4k | Automated safety check: Pass | MIT | |
| Auto EmbeddedDunCanYounG-1/MICU-auto-embedded | 253 | — | ~1.6k | Automated safety check: Pass | CC-BY-NC-4.0 |
Similar skills
Esp32 Firmware Engineer
alxv2016/folloup-sticky
ESP32 firmware engineering for ESP-IDF projects. An agent skill from alxv2016/folloup-sticky.
RuView mmWave Radar Setup
ruvnet/RuView
Sets up and runs 60 GHz and 24 GHz mmWave radar sensing on ESP32 boards in RuView, alone or fused with WiFi CSI.
Embedded Debug
FastLED/FastLED
Firmware crash analysis, stack trace decoder, and register dump interpreter for ESP32/ARM/AVR platforms.
Auto Embedded
DunCanYounG-1/MICU-auto-embedded
全平台嵌入式 AI 开发框架（对标 Trellis）：把 RIPER-5 五阶段协议 + 四文件记忆 + 分层架构门禁 + Scout/Builder/Verifier 多 Agent + 24 个工具调用技能（build/flash/debug/serial/can/modbus/visa/static/memory/rtos/scons），做成『装进工程、项目级 hook…
Embedded Cpp14 Misra
BlueAndi/Pixelix
A skill your agent uses when writing, reviewing, or refactoring C/C++ firmware code in this repository (src/, lib/, test/) — creating or editing .h/.hpp/.cpp files, applying MISRA-oriented and…
More from op7418/ai-desk-card
AI Desk Card
op7418/ai-desk-card
Drives an M5Paper e-ink desk display from an agent: probes device state, guides first-time setup, and pushes widgets such as calendar, todos and weather.
AI Desk Card Onboarding
op7418/ai-desk-card
Walks a user through first-time setup of an AI Desk Card e-ink device, probing daemon, USB, BLE, Wi-Fi and firmware state and fixing whatever is missing.
M5Paper Card Widgets
op7418/ai-desk-card
Pushes glanceable info such as todos, calendar, weather and AI status to an M5Paper e-ink desk card through a local daemon, picking slots and widget types.
Related
Works with
Categories
Questions about AI Desk Card Wi-Fi Setup
What does AI Desk Card Wi-Fi Setup do?
Walks a user through putting an AI Desk Card e-ink device on home Wi-Fi so frames arrive in about 0.2 seconds instead of the 32 seconds USB takes. The skill takes the user's Wi-Fi name and password, writes them once to the device's NVS storage through the local daemon, and lets the device join the network and advertise over mDNS.2 seconds rather than USB's 32.
When should I use AI Desk Card Wi-Fi Setup?
AI Desk Card Wi-Fi Setup fits situations like: moving an AI Desk Card from USB to wireless frame updates; A user asks how to connect the card to their home Wi-Fi; diagnosing a device that stays at wifi_connected false; switching the daemon to the Wi-Fi transport after provisioning.
How do I install AI Desk Card Wi-Fi Setup in Claude Code?
Run `npx skills add op7418/ai-desk-card --skill card-wifi-setup -a claude-code`. Or copy the skill folder (plugin/skills/card-wifi-setup in op7418/ai-desk-card) into .claude/skills/card-wifi-setup in your project. Claude Code loads it when a task matches its description.
How do I install AI Desk Card Wi-Fi Setup in Codex?
Run `npx skills add op7418/ai-desk-card --skill card-wifi-setup -a codex`. Or copy the skill folder (plugin/skills/card-wifi-setup in op7418/ai-desk-card) into .agents/skills/card-wifi-setup in your project. Codex loads it when a task matches its description.
Can I use AI Desk Card Wi-Fi Setup in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add op7418/ai-desk-card --skill card-wifi-setup -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/card-wifi-setup, .gemini/skills/card-wifi-setup, .github/skills/card-wifi-setup and .opencode/skills/card-wifi-setup in your project.
What does AI Desk Card Wi-Fi Setup need to run?
Going by SKILL.md and its folder, AI Desk Card Wi-Fi Setup needs the command-line tools its instructions call (bash). Our summary lists: An AI Desk Card device the daemon can reach over USB serial or BLE; The AI Desk Card daemon running; A 2.4GHz Wi-Fi network. Its frontmatter pre-approves these tools: Bash, AskUserQuestion.
Does AI Desk Card Wi-Fi Setup access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is AI Desk Card Wi-Fi Setup safe to install?
Our automated static check of SKILL.md found notes only (pre-approves every shell command (allowed-tools: bash)), nothing it rates as a warning. It is not a guarantee. Review the folder before installing.
What licence does AI Desk Card Wi-Fi Setup use?
AI Desk Card Wi-Fi Setup has a licence file (the repository's licence) that doesn't match a standard licence. Read it on GitHub before reusing the skill.
How many tokens does AI Desk Card Wi-Fi Setup use?
About 680 tokens (SKILL.md is roughly 2.7k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to AI Desk Card Wi-Fi Setup?
Skills that share tags, products or a category with AI Desk Card Wi-Fi Setup: RuView Hardware Setup (ruvnet/RuView, 97k stars), Esp32 Firmware Engineer (alxv2016/folloup-sticky, 116 stars), RuView mmWave Radar Setup (ruvnet/RuView, 97k stars) and Embedded Debug (FastLED/FastLED, 7.5k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains AI Desk Card Wi-Fi Setup?
op7418 (a GitHub user) maintains it in op7418/ai-desk-card, which has 151 GitHub stars. The repository holds 4 skills in this directory. The repository was last updated on May 22, 2026.
Source: op7418/ai-desk-card on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.