React Native Best Practices
vercel-labs/openreview
A prioritized rule set for React Native and Expo apps covering list performance, animation, navigation, UI patterns, state, rendering, monorepos and configuration.
新增或改写 MaaEnd 的 AutoCollect 自动采集路线说明。默认包含路线文件创建、AutoCollect 主入口接线、任务选项注册和多语言文案补充。适用于“参考现有 AutoCollect 路线新建一条采集线”“给定传送点与路径点位生成 AutoCollectRouteX.json 并注册到任务中”“用户已经写好路线文件，只需要补注册接口”等场景。注意：本 skill 仅适用于参考…
Install Autocollect Add Route
$ npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install MaaEnd/MaaEnd autocollect-add-route --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/MaaEnd/MaaEnd.git skills-src && mkdir -p .claude/skills && cp -r skills-src/.agents/skills/autocollect-add-route .claude/skills/autocollect-add-route && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "autocollect-add-route" agent skill from https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-route into .claude/skills/autocollect-add-route/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "autocollect-add-route", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-routeType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install MaaEnd/MaaEnd autocollect-add-route --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/MaaEnd/MaaEnd.git skills-src && mkdir -p .agents/skills && cp -r skills-src/.agents/skills/autocollect-add-route .agents/skills/autocollect-add-route && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "autocollect-add-route" agent skill from https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-route into .agents/skills/autocollect-add-route/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "autocollect-add-route", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install MaaEnd/MaaEnd autocollect-add-route --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/MaaEnd/MaaEnd.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/.agents/skills/autocollect-add-route .cursor/skills/autocollect-add-route && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "autocollect-add-route" agent skill from https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-route into .cursor/skills/autocollect-add-route/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "autocollect-add-route", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/MaaEnd/MaaEnd.git --path .agents/skills/autocollect-add-route--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install MaaEnd/MaaEnd autocollect-add-route --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/MaaEnd/MaaEnd.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/.agents/skills/autocollect-add-route .gemini/skills/autocollect-add-route && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "autocollect-add-route" agent skill from https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-route into .gemini/skills/autocollect-add-route/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "autocollect-add-route", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install MaaEnd/MaaEnd autocollect-add-routeInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/MaaEnd/MaaEnd.git skills-src && mkdir -p .github/skills && cp -r skills-src/.agents/skills/autocollect-add-route .github/skills/autocollect-add-route && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "autocollect-add-route" agent skill from https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-route into .github/skills/autocollect-add-route/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "autocollect-add-route", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install MaaEnd/MaaEnd autocollect-add-route --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/MaaEnd/MaaEnd.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/.agents/skills/autocollect-add-route .opencode/skills/autocollect-add-route && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "autocollect-add-route" agent skill from https://github.com/MaaEnd/MaaEnd/tree/v2/.agents/skills/autocollect-add-route into .opencode/skills/autocollect-add-route/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "autocollect-add-route", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
autocollect-add-route- GitHub stars
- 4k
- Token cost
- ~3.2k tokens
- SKILL.md length
- 783 words
- Files
- 1
- Skills in repo
- 14
- Repo updated
- First seen
- Licence
- AGPL-3.0
At a glance
新增或改写 MaaEnd 的 AutoCollect 自动采集路线说明。默认包含路线文件创建、AutoCollect 主入口接线、任务选项注册和多语言文案补充。适用于“参考现有 AutoCollect 路线新建一条采集线”“给定传送点与路径点位生成 AutoCollectRouteX.json 并注册到任务中”“用户已经写好路线文件，只需要补注册接口”等场景。注意：本 skill 仅适用于参考…
- Works in 12 steps: 新建路线文件 → 仅注册接口 → 任务名 → …
- Mobile work in your project
- SKILL.md covers 目的, 适用范围, 开始前先读什么 and 先判断任务类型, plus 5 more sections
- Calls go
What it does
Autocollect Add Route is an agent skill from MaaEnd/MaaEnd. 新增或改写 MaaEnd 的 AutoCollect 自动采集路线说明。默认包含路线文件创建、AutoCollect 主入口接线、任务选项注册和多语言文案补充。适用于“参考现有 AutoCollect 路线新建一条采集线”“给定传送点与路径点位生成 AutoCollectRouteX.json 并注册到任务中”“用户已经写好路线文件，只需要补注册接口”等场景。注意：本 skill 仅适用于参考 assets/resource/pipeline/AutoCollect/AutoCollectRoute6.json 的单段 MapNavigateAction 路线，不再处理多段 GotoFindN 路线；定位节点必须使用 MapLocateAssertLocation。
Its SKILL.md is about 3.2k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Mobile. The repository describes itself as: MaaEnd 终末地小助手：基于视觉 AI 的「明日方舟：终末地」自动化工具. The licence is AGPL-3.0.
When your agent uses it
- Mobile work in your project
Example prompts
- “参考现有 AutoCollect 路线新建一条采集线”
- “给定传送点与路径点位生成 AutoCollectRouteX.json 并注册到任务中”
- “用户已经写好路线文件，只需要补注册接口”
- “/autocollect-add-route”
Workflow steps
12 steps, taken from the step headings in SKILL.md.
What it can do on your machine
Read from SKILL.md and the folder at commit 43eb28a. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
Shell commands in SKILL.md call:
go
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Autocollect Add Route loads about 3.2k tokens when it runs. Until then it costs about 92 tokens; SKILL.md has 783 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from MaaEnd/MaaEnd at commit 43eb28a, republished under its AGPL-3.0 licence (© MaaEnd). 783 words, ~3,154 tokens.
Download SKILL.mdSave it as
.claude/skills/autocollect-add-route/SKILL.md (or your agent's skills folder).- name
- autocollect-add-route
- description
- 新增或改写 MaaEnd 的 AutoCollect 自动采集路线说明。默认包含路线文件创建、AutoCollect 主入口接线、任务选项注册和多语言文案补充。适用于“参考现有 AutoCollect 路线新建一条采集线”“给定传送点与路径点位生成 AutoCollectRouteX.json 并注册到任务中”“用户已经写好路线文件，只需要补注册接口”等场景。注意：本 skill 仅适用于参考 `assets/resource/pipeline/AutoCollect/AutoCollectRoute6.json` 的单段 `MapNavigateAction` 路线，不再处理多段 `GotoFindN` 路线；定位节点必须使用 `MapLocateAssertLocation`。
- argument-hint
- 如果是新建路线，推荐直接提供任务名（如“路线6：四号谷地-轻红柱状菌”）、第一个传送点（如 `SceneEnterWorldValleyIVTheHub2`）、断言点和完整 path 点列，以及“点击采集”或“挖掘类路线”。如果用户已经有路线文件、只需要注册接口，则只提供任务名即可。
AutoCollect 新增路线
目的
在 MaaEnd 现有的 AutoCollect 体系中，支持两类常见工作：
- 新建一条完整可用的自动采集路线，并同步完成相关注册
- 在已有
AutoCollectRouteX.json的前提下，只补齐注册接口和多语言文案
默认涉及的文件包括：
assets/resource/pipeline/AutoCollect/AutoCollectRouteX.jsonassets/resource/pipeline/AutoCollect.jsonassets/tasks/AutoCollect.jsonassets/locales/interface/*.json
这里的“新路线建立”仅指参考 AutoCollectRoute6.json 的单段路线，也就是：
- 定位节点使用
MapLocateAssertLocation - 导航节点固定为单个
AutoCollectRouteXGoto MapNavigateAction的采集点通过同一条path中的动作点控制- 最终
next直接指向AutoCollectRouteXEnd
适用范围
以下场景使用本 skill：
- 参考现有 AutoCollect 单段路线新增一条
AutoCollectRouteX.json - 用户提供传送点和路径点位，要求生成并注册一条单段 AutoCollect 路线
- 用户已经写好
AutoCollectRouteX.json，只要求补齐AutoCollect.json、assets/tasks/AutoCollect.json和 locale 注册 - 用户要求补齐 AutoCollect 路线的任务注册、多语言文案和主入口接线
以下场景不适用本 skill：
EnvironmentMonitoring路线AutoEssence路线AutoEcoFarm路线- Go Service 算法扩展
- 任何多段
GotoFind1/2/3...结构的 AutoCollect 路线
开始前先读什么
优先阅读并对照以下文件：
assets/resource/pipeline/AutoCollect/AutoCollectRoute6.jsondocs/zh_cn/developers/components/map-navigator.mdassets/resource/pipeline/AutoCollect.jsonassets/tasks/AutoCollect.jsonassets/locales/interface/zh_cn.json
必要时补充阅读：
assets/locales/interface/zh_tw.jsonassets/locales/interface/en_us.jsonassets/locales/interface/ja_jp.jsonassets/locales/interface/ko_kr.jsonassets/resource/pipeline/Interface/SceneValleyIV.json- 其他
SceneManager/Interface相关文件
先判断任务类型
动手前，先判断当前需求属于哪一种：
1. 新建路线文件
适用于：用户还没有 AutoCollectRouteX.json，希望你生成路线文件并完成注册。
这一类需要完整参数：
- 任务名
- 第一个传送点
- 断言点
- 完整路径点列
- 采集类型
2. 仅注册接口
适用于：用户已经有现成的 AutoCollectRouteX.json，只希望把它接入任务入口和选项。
这一类默认只需要：
- 任务名
然后直接完成以下注册：
assets/resource/pipeline/AutoCollect.jsonassets/tasks/AutoCollect.jsonassets/locales/interface/*.json
不需要再追问传送点、断言点、path 或采集类型。
必要参数
场景 A：新建路线文件
默认流程下，以下 5 类信息是必需的：
- 任务名
- 第一个传送点
- 断言点与完整路径点列
- 采集类型
场景 B：仅注册接口
默认只需要 1 项：
- 任务名
1. 任务名
- 示例：
路线6：四号谷地-轻红柱状菌 - 必须能从任务名里解析出路线编号
路线6将决定：- 文件名：
AutoCollectRoute6.json - 节点前缀：
AutoCollectRoute6... - 子入口：
AutoCollectRoute6Sub - 任务 case：
Route6 - locale 键：
option.AutoCollectRoute6.label
- 文件名：
2. 第一个传送点
- 示例：
SceneEnterWorldValleyIVTheHub2 - 它决定
Start.next中的[JumpBack]SceneEnterWorldXxx - 仅在“新建路线文件”场景需要
3. 断言点与完整路径点列
- 断言点用于生成
MapLocateAssertLocation.target - 完整路径点列用于生成单个
AutoCollectRouteXGoto.action.param.custom_action_param.path - 用户通常会把采集点标记成
[x, y, true] - 本 skill 需要在写入前把这些
true转换成具体动作字符串 - 仅在“新建路线文件”场景需要
4. 采集类型
- 点击采集路线：将
[x, y, true]转换为[x, y, "COLLECT"] - 挖掘类路线：将
[x, y, true]转换为[x, y, "DIG"] - 仅在“新建路线文件”场景需要
5. 是否需要一并注册接口
- 如果用户明确说“只写路线文件，不注册”，那就只生成路线文件
- 如果用户没有特别说明，默认同时完成注册
缺少参数时的处理
新建路线文件时
遇到以下情况时，先向用户确认，不要直接生成路线：
- 没有任务名，无法确定路线编号和文件命名
- 任务名不符合“路线X：xxx”格式，无法安全解析编号
- 没有第一个传送点，无法确定
[JumpBack]SceneEnterWorldXxx - 没有断言点，无法生成
MapLocateAssertLocation.target - 没有完整路径点列，无法生成
path - 没有采集类型，无法把
true转换成COLLECT或DIG
推荐追问方式尽量简短，例如：
- “还缺任务名，请给我类似
路线6：四号谷地-轻红柱状菌的名称。” - “还缺第一个传送点，请给我类似
SceneEnterWorldValleyIVTheHub2的入口名。” - “还缺断言点，请给我传送后用于定位的坐标。”
- “还缺完整 path 点列，请把整条单段路线的点位发我。”
- “还缺采集类型，请确认是点击采集还是挖掘路线。”
仅注册接口时
遇到以下情况时，先向用户确认，不要直接注册：
- 没有任务名，无法确定路线编号和注册键名
- 任务名不符合“路线X：xxx”格式，无法安全解析编号
只要任务名齐全，就直接执行注册，不需要追问其它路线参数。
核心判断规则
1. 先判断是“新建路线”还是“只注册”
优先观察用户给出的关键信息：
- 如果用户明确说“已经有路线文件，只注册接口”，则直接走注册流程
- 如果用户给出
AutoCollectRouteX.json文件路径并要求接入任务，也按“只注册”处理 - 如果用户要求生成
path、断言点或整条路线文件，则走“新建路线”流程
2. 只处理 Route6 风格单段路线
优先观察用户给出的关键信息：
- 如果用户明确说“参考 Route6”，通常就是本 skill 的目标场景
- 如果路线使用
MapNavigateAction + MapLocateAssertLocation + AutoCollectRouteXGoto，说明符合本 skill 范围 - 如果用户要求拆成
GotoFind1/2/3...，说明这不属于本 skill 的范围，应先澄清
本 skill 仅处理以下结构：
AutoCollectRouteXAssertLocationAutoCollectRouteXGotoAutoCollectRouteXEnd
不要在本 skill 中生成以下结构：
AutoCollectRouteXGotoFind1AutoCollectRouteXGotoFind2- 任意
anchor串联的多段节点
3. 传送入口与断言点不要混淆
用户可能会说“传送点参考某条路线”，这通常只表示：
- 复用该路线的
SceneEnterWorldXxx - 复用同一区域的大地图入口
这不一定表示复用旧路线的断言坐标。
如果用户另外提供了“第一个点用于传送后定位”或显式给出了定位坐标，则：
AutoCollectRouteXAssertLocation必须使用用户新给的坐标- 不要继续沿用参考路线原本的
target
4. 首个断言点与导航路径要分离
如果用户明确说明：
- “第一个点只是定位点”
- “使用
MapLocateAssertLocation进行判断”
则：
- 首个坐标先视为断言点
[x, y]，再换算为target: [x-10, y-10, 20, 20] - 不要把这个点再塞回
path里 MapLocateAssertLocation直接写zone_id和target，不要包一层expected数组
5. 把用户输入的 true 转换成动作字符串
根据 map-navigator.md，MapNavigator 采集语义使用动作字符串，而不是布尔值：
COLLECT: 采集点DIG: 挖掘点
因此当用户给出 [x, y, true] 时，本 skill 应按采集类型做归一化：
- 点击采集路线：
[x, y, true]->[x, y, "COLLECT"] - 挖掘类路线：
[x, y, true]->[x, y, "DIG"]
如果用户已经直接给出 [x, y, "COLLECT"] 或 [x, y, "DIG"]，则沿用原值，不要重复改写。
6. 动作点保留在单段 path 中
如果用户给出的路径中包含采集点标记，则应：
- 保留在同一个
path数组中 - 保持单个
AutoCollectRouteXGoto节点 - 不要因为出现多个采集点就拆成
GotoFindN - 不要再使用旧的
anchor + AutoCollectClickStart/AutoCollectDigStart链式写法
需要整理出的信息
新建路线文件时
动手前，尽量整理齐以下字段：
| 字段 | 说明 |
|---|---|
TaskLabel | 任务名，例如 路线6：四号谷地-轻红柱状菌 |
RouteId | 从 TaskLabel 解析出的编号，例如 6 |
RouteFile | 目标文件名，例如 AutoCollectRoute6.json |
TemplateRoute | 参考路线，例如 Route6 |
EnterWorldNode | 第一个传送点，例如 SceneEnterWorldValleyIVTheHub2 |
AssertTarget | 断言框坐标；若断言点为 [x, y]，默认换算为 [x-10, y-10, 20, 20] |
ZoneId | 通常来自 path 第一项 {"action":"ZONE","zone_id":"..."} |
ActionType | 固定为 MapNavigateAction |
CollectType | Click 或 Dig，决定 true 转成 COLLECT 还是 DIG |
GotoNode | 固定为 AutoCollectRouteXGoto |
Path | 完整单段路径；采集动作通过 "COLLECT" / "DIG" 标记表达 |
其中以下 4 项应优先确认：
TaskLabelEnterWorldNodeAssertTarget- 原始完整路径点列
仅注册接口时
动手前至少确认：
TaskLabelRouteIdRouteFileRouteSubRouteCaseLocaleKey
标准实施步骤
场景 A：新建路线文件
第一步：从任务名解析路线编号
任务名必须形如：
路线6：四号谷地-轻红柱状菌路线12：武陵城-某某资源
解析规则：
- 从任务名开头提取
路线X - 得到
RouteId = X - 用
RouteId推导以下命名：AutoCollectRouteX.jsonAutoCollectRouteXStartAutoCollectRouteXEndAutoCollectRouteXAssertLocationAutoCollectRouteXGotoAutoCollectRouteXSubRouteXoption.AutoCollectRouteX.label
如果任务名不满足上述格式，先让用户补一个合规名称，再继续。
Show full SKILL.md (320 more words)Show less
第二步：归一化用户给出的路径点
在生成 JSON 前，先按以下规则整理原始 path：
- 保留首个
ZONE节点不变 - 保留普通坐标点
[x, y]不变 - 如果用户给的是
[x, y, true]：- 点击采集路线改成
[x, y, "COLLECT"] - 挖掘类路线改成
[x, y, "DIG"]
- 点击采集路线改成
- 如果用户给的是
[x, y, "COLLECT"]或[x, y, "DIG"]，直接保留 - 不要把
true原样写进最终path
第三步：生成 AutoCollectRouteX.json
文件骨架固定如下：
{
"AutoCollectRouteXStart": { ... },
"AutoCollectRouteXEnd": { ... },
"AutoCollectRouteXAssertLocation": { ... },
"AutoCollectRouteXGoto": { ... }
}不要生成任何 GotoFindN 节点。
Start 节点规则
next第一个目标是AutoCollectRouteXAssertLocationnext第二个目标是对应的[JumpBack]SceneEnterWorldXxxfocus.Node.Recognition.Succeeded使用中文，例如：开始路线X
End 节点规则
保持：
"pre_delay": 0,
"post_delay": 0AssertLocation 节点规则
- 必须使用
MapLocateAssertLocation desc使用中文，例如：传送到采集点recognition固定写成字符串："Custom"custom_recognition固定写成："MapLocateAssertLocation"zone_id不作为独立入参单独向用户追问，优先从path的第一个ZONE推导- 如果用户给的是断言点
[x, y]，默认换算为[x-10, y-10, 20, 20] - 仅当用户明确给出其它容差矩形时，才不要使用上述默认换算
action固定为"DoNothing"- 不要写
expected数组 - 不要写
map_name next固定指向AutoCollectRouteXGoto
标准结构参考当前 Route6：
{
"AutoCollectRouteXAssertLocation": {
"desc": "传送到采集点",
"recognition": "Custom",
"custom_recognition": "MapLocateAssertLocation",
"custom_recognition_param": {
"zone_id": "ValleyIV_Base",
"target": [
520,
687,
20,
20
]
},
"action": "DoNothing",
"next": [
"AutoCollectRouteXGoto"
]
}
}Goto 节点规则
本 skill 新建路线固定使用 MapNavigateAction：
action.type = "Custom"action.param.custom_action = "MapNavigateAction"action.param.custom_action_param.path第一项必须是：
{
"action": "ZONE",
"zone_id": "..."
}节点内容规则：
- 节点名固定为
AutoCollectRouteXGoto desc使用中文，例如：前往采集点path为完整单段路线- 路径内的采集点应使用
"COLLECT"或"DIG" next直接指向AutoCollectRouteXEnd- 不要写
anchor - 不要拆分为多个导航节点
- 不要把
[x, y, true]直接保留到最终 JSON 中
第四步：按需注册接口
如果用户未明确要求“只生成路线文件”，则默认继续完成注册：
assets/resource/pipeline/AutoCollect.jsonassets/tasks/AutoCollect.jsonassets/locales/interface/*.json
场景 B：仅注册接口
第一步：从任务名解析注册命名
从任务名推导：
RouteFile:AutoCollectRouteX.jsonRouteSub:AutoCollectRouteXSubRouteCase:RouteXLocaleKey:option.AutoCollectRouteX.label
第二步：注册到 assets/resource/pipeline/AutoCollect.json
必须同步修改两处：
- 在
AutoCollectStart.next中加入"[JumpBack]AutoCollectRouteXSub" - 新增
AutoCollectRouteXSub节点并指向AutoCollectRouteXStart
第三步：注册到 assets/tasks/AutoCollect.json
必须同步修改两处：
- 如项目默认勾选所有路线，则把
RouteX追加到default_case - 在
cases中新增RouteX对应项
第四步：补充 assets/locales/interface/*.json
至少新增以下语言：
zh_cnzh_twen_usja_jpko_kr
统一新增键：
"option.AutoCollectRouteX.label": "..."文案规范
路线文件内的提示文案应遵守以下规则：
focus.Node.Recognition.Succeeded用中文desc用中文AssertLocation必须使用MapLocateAssertLocationGoto使用单段命名和单段文案
推荐写法：
Start.focus:开始路线XAssertLocation.desc:传送到采集点Goto.desc:前往采集点
不要写英文内部提示，例如：
Start Route XArrive at collection pointGo to collection point
检查清单
提交前检查：
新建路线文件时
- 任务名满足“路线X：xxx”格式
-
RouteId是从任务名解析得到的 - 新路线文件名、节点名、选项名、文案键一致
-
Start使用了正确的[JumpBack]SceneEnterWorldXxx - 新路线使用的是
MapNavigateAction -
AssertLocation使用了新的断言点，没有误复用旧坐标 -
AssertLocation使用的是MapLocateAssertLocation的扁平结构 - 若首个点仅用于断言，则没有混入
path - 路线只有一个
AutoCollectRouteXGoto - 用户给出的
[x, y, true]已按采集类型转换成"COLLECT"或"DIG" - 最终
path中不再残留布尔true作为采集标记 - 没有出现
GotoFindN或anchor
需要注册接口时
-
AutoCollect.json已接入AutoCollectRouteXSub -
assets/tasks/AutoCollect.json已注册RouteX - 5 份 locale 已新增
option.AutoCollectRouteX.label -
focus/desc使用中文 - 文档和文件均为 UTF-8，无乱码
验证建议
新建路线文件时
至少做以下验证：
- 检查路线执行顺序是否为：传送 -> 位置断言 -> 单段导航/采集 -> 结束
- 检查
path中的采集点都已从true正确转换为"COLLECT"或"DIG" - 检查最终结束链路是否正确
只注册接口时
至少做以下验证：
- 检查新增路线是否能在
AutoCollectRoutes中显示 - 检查勾选
RouteX后是否能启用AutoCollectRouteXSub
静态验证时，优先确认以下文件能被正常解析：
assets/resource/pipeline/AutoCollect.jsonassets/tasks/AutoCollect.jsonassets/locales/interface/*.json
如果同时新建路线文件，再额外确认：
assets/resource/pipeline/AutoCollect/AutoCollectRouteX.json
输出模板
完成后，优先按以下结构汇报：
## 已完成
- 新增或复用路线文件：`AutoCollectRouteX.json`
- 已接入 `assets/resource/pipeline/AutoCollect.json`
- 已接入 `assets/tasks/AutoCollect.json`
- 已补充 `assets/locales/interface/*.json`
## 关键实现
- 从任务名 `路线X：...` 解析出路线编号并推导命名
- 如果需要新建路线：复用 `SceneEnterWorld...` 作为传送入口
- 如果需要新建路线：使用 `MapLocateAssertLocation` 校验断言点换算得到的 `[x-10, y-10, 20, 20]`
- 如果需要新建路线：将用户输入的 `[x, y, true]` 按采集类型转换为 `"COLLECT"` 或 `"DIG"`
- 已完成 `AutoCollect.json` / `assets/tasks/AutoCollect.json` / locale 注册
## 校验
- 核心 JSON 解析通过 / 未通过
- 已确认 `RouteX` 注册链路存在约束
- 不要对现有
RouteX做无关重构 - 不要为了“更通用”而提前抽象自动生成器，除非用户明确要求
- 不要把点击采集路线改成挖掘路线，或反过来
- 不要省略任务注册与多语言注册，除非用户明确说不需要
- 不要把内部提示文案写成英文
- 不要生成任何多段
GotoFindN结构 - 不要把用户输入的
[x, y, true]原样写入最终path - 如果用户已经有路线文件且只要求注册接口，不要继续追问传送点、断言点、path 或采集类型
© MaaEnd, AGPL-3.0. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in .agents/skills/autocollect-add-route of MaaEnd/MaaEnd.
Open the folder on GitHubat commit 43eb28a
Compare with similar skills
Autocollect Add Route next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Autocollect Add Route this skillMaaEnd/MaaEnd | 4k | — | ~3.2k | Automated safety check: Pass | AGPL-3.0 | |
| React Native Best Practicesvercel-labs/openreview | 1.7k | 17 repos | ~1.1k | Automated safety check: Pass | MIT | |
| Swiftui Protwostraws/SwiftUI-Agent-Skill | 5.2k | 2 repos | ~1.5k | Automated safety check: Pass | MIT | |
| Kortix Brandkortix-ai/suna | 20k | — | ~4k | Automated safety check: Pass | Custom licence | |
| Ip As LogoKartikLabhshetwar/better-shot | 2.4k | 1 repos | ~4.3k | Automated safety check: Pass | MIT | |
| Compose Multiplatform Patternsmonta-app/ocpp-emulator | 180 | 5 repos | ~2k | Automated safety check: Pass | Apache-2.0 |
Similar skills
- Official
Swiftui Pro
twostraws/SwiftUI-Agent-Skill
Comprehensively reviews SwiftUI code for best practices on modern APIs, maintainability, and performance.
Kortix Brand
kortix-ai/suna
Load FIRST for anything that carries the Kortix look or voice: product or mobile UI, copy of any kind, decks, social, images, email, CLI output, anything with the logo, and reviews of these.
Ip As Logo
KartikLabhshetwar/better-shot
Generate extremely simple, cute, personified square character images with rounded heavy forms, two purposeful character colors, one solid background color, and a dominant lower-corner composition.
Compose Multiplatform Patterns
monta-app/ocpp-emulator
Compose Multiplatform and Jetpack Compose patterns for KMP projects — state management, navigation, theming, performance, and platform-specific UI.
Aso Appstore Screenshots
adamlyttleapps/claude-skill-aso-appstore-screenshots
Generate high-converting App Store screenshots by analyzing your app's codebase, discovering core benefits, and creating ASO-optimized screenshot images using Nano Banana Pro.
More from MaaEnd/MaaEnd
All 14 skills in this repoMaa Logging
MaaEnd/MaaEnd
MaaFramework 日志宏用法指南，适用于 MaaEnd cpp-algo。Use when writing logging code, using LogInfo/LogError/LogWarn/LogDebug/LogTrace, outputting containers or custom types to logs, or when the user asks about…
Maaend Test Image
MaaEnd/MaaEnd
为 MaaEnd 添加、导入或补充节点识别测试截图，并按仓库约定脱敏图片、放入 tests/MaaEndTestset、维护 tests//test.json 和运行 pnpm check/pnpm test 验证。用户提到“添加测试图片/截图”“把截图加入 ADB 或 Win32 测试集”“给节点补正例或反例”“更新 hits/box”“UID…
Meojson
MaaEnd/MaaEnd
Guide for using the meojson C++ JSON library in MaaEnd cpp-algo.
Autostockstaple Log Analysis
MaaEnd/MaaEnd
仅分析 AutoStockStapleMain 的 MaaEnd 日志。用于还原该任务实际购买了什么、购买所对应的证据、逐步剩余账单（券/账单）数值时间线，以及在 pipeline 或 go-service 中应当加日志/埋点的位置。适用于用户询问 AutoStockStapleMain、AutoStockStaple、武陵/四号谷地的稳定需求物资购买，或该任务内账单数值变化原因等场景。
Cpp Algo Style
MaaEnd/MaaEnd
MaaEnd cpp-algo C++ 编码风格与工程规范指南。参考 MaaFramework 的优秀实践，规范命名、头文件、公共工具、错误处理、日志、CMake 等方面。在编写、修改或审查 agent/cpp-algo/ 下的 C++ 代码时使用。
Credit Shopping Log Analysis
MaaEnd/MaaEnd
分析 MaaEnd CreditShoppingMain 的日志。用于还原信用购物任务中实际购买了什么商品、每件商品的折扣力度、是否触发过刷新（或刷新次数已用尽）、稳健刷新是否触发、以及信用点的消耗状况。货架槽位必须以日志中的 CreditIcon（TemplateMatcher）为锚，有无 BuyFirstOCR/Priority2OCR…
Related
Categories
Questions about Autocollect Add Route
What does Autocollect Add Route do?
新增或改写 MaaEnd 的 AutoCollect 自动采集路线说明。默认包含路线文件创建、AutoCollect 主入口接线、任务选项注册和多语言文案补充。适用于“参考现有 AutoCollect 路线新建一条采集线”“给定传送点与路径点位生成 AutoCollectRouteX.json 并注册到任务中”“用户已经写好路线文件，只需要补注册接口”等场景。注意：本 skill 仅适用于参考…. Autocollect Add Route is an agent skill from MaaEnd/MaaEnd.
When should I use Autocollect Add Route?
Autocollect Add Route fits situations like: mobile work in your project.
How do I install Autocollect Add Route in Claude Code?
Run `npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a claude-code`. Or copy the skill folder (.agents/skills/autocollect-add-route in MaaEnd/MaaEnd) into .claude/skills/autocollect-add-route in your project. Claude Code loads it when a task matches its description.
How do I install Autocollect Add Route in Codex?
Run `npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a codex`. Or copy the skill folder (.agents/skills/autocollect-add-route in MaaEnd/MaaEnd) into .agents/skills/autocollect-add-route in your project. Codex loads it when a task matches its description.
Can I use Autocollect Add Route in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add MaaEnd/MaaEnd --skill autocollect-add-route -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/autocollect-add-route, .gemini/skills/autocollect-add-route, .github/skills/autocollect-add-route and .opencode/skills/autocollect-add-route in your project.
What does Autocollect Add Route need to run?
Going by SKILL.md and its folder, Autocollect Add Route needs the command-line tools its instructions call (go).
Does Autocollect Add Route access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Autocollect Add Route safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Autocollect Add Route use?
Autocollect Add Route is published under the AGPL-3.0 licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Autocollect Add Route use?
About 3.2k tokens (SKILL.md is roughly 13k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Autocollect Add Route?
Skills that share tags, products or a category with Autocollect Add Route: React Native Best Practices (vercel-labs/openreview, 1.7k stars), Swiftui Pro (twostraws/SwiftUI-Agent-Skill, 5.2k stars), Kortix Brand (kortix-ai/suna, 20k stars) and Ip As Logo (KartikLabhshetwar/better-shot, 2.4k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Autocollect Add Route?
MaaEnd (a GitHub organization) maintains it in MaaEnd/MaaEnd, which has 3,995 GitHub stars. The repository holds 14 skills in this directory. The repository was last updated on October 8, 2026.
Source: MaaEnd/MaaEnd on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.