Install

/slack-channel:install

Overview

CCSC lifecycle command center. One skill, eight modes — fresh install through teardown. No subcommand defaults to the full install walkthrough.

/slack-channel:install [mode]

Modes:
  install     full fresh-clone walkthrough (default)        ← new user starts here
  doctor      run a health check against an existing install
  verify      run the verification round-trip only
  repair      auto-fix common issues surfaced by doctor
  manifest    export a Slack app manifest.json (one-click import — saves 10 min of scope clicking)
  reset       wipe state and restart from Step 3 (keeps Slack app)
  tour        explain CCSC features without installing (for evaluators)
  uninstall   clean teardown — remove state dir, optionally guide Slack app deletion

This skill orchestrates. It delegates token configuration to /slack-channel:configure and pairing to /slack-channel:access pair — do not re-implement those.

Prerequisites

Three prerequisites gate a fresh install; install mode checks them as Step 0 and doctor re-checks them on demand. See references/prerequisites.md for the exact commands and recovery paths.

1. Bun ≥ 1.0 — bun --version. Node.js fallback is fine (see the prerequisites doc).
2. Claude Code ≥ v2.1.80 — claude --version. Older versions cannot load Channels.
3. claude.ai login (NOT API-key-only) — Channels is Research Preview and rejects pure API-key auth.

Doctor mode additionally shells out to curl and jq (see "Doctor dependencies" below), and every mode past Step 1 assumes a Slack workspace where you can create an app.

Instructions

1. Parse the first word of $ARGUMENTS.
2. If empty or install, run the install mode.
3. Otherwise dispatch to the matching mode described in the sections below — each Mode: section is the complete procedure for that mode.
4. Unknown modes: show the help block above and exit.

Mode: install (default)

End-to-end fresh-clone walkthrough.

┌────────────────────────────────────────────────────────┐
│ 0. Prerequisite check    (Bun, Claude Code, claude.ai) │
│ 1. Slack app creation    (or skip → /install manifest) │
│ 2. Add bot to channel    ← THE silent killer step      │
│ 3. Configure tokens      → /slack-channel:configure    │
│ 4. Start MCP server                                    │
│ 5. Pair account          → /slack-channel:access pair  │
│ 6. Verification round-trip                             │
│ 7. Offer optional next steps                           │
└────────────────────────────────────────────────────────┘

Step 0: Prerequisite check

See references/prerequisites.md for the exact commands and recovery paths. Three checks in order:

1. Bun ≥ 1.0: bun --version. If missing, show install command (Node fallback is fine — see prerequisites doc).
2. Claude Code ≥ v2.1.80: claude --version. Older versions cannot load Channels.
3. claude.ai login (NOT API-key-only): Channels is Research Preview and rejects pure API-key auth. If ANTHROPIC_API_KEY is set but no claude.ai session exists, instruct claude login.

If any check fails, give the recovery command, wait for the user to fix, then re-check. Don't proceed with broken prerequisites.

Step 1: Slack app creation

Two paths: offer the manifest path (faster) or walk the manual UI:

• Faster path — run /slack-channel:install manifest first to download a slack-app-manifest.json, then at https://api.slack.com/apps click Create New App → From an app manifest and paste it. All 8 scopes and 4 event subscriptions are pre-configured. User just clicks Install to Workspace and copies the two tokens.
• Manual path — walk the 5-step UI checklist. See references/slack-app-setup.md for the full step-by-step.

Tokens stay in a scratch buffer at this point — they're written to disk in Step 3.

Step 2: Add bot to channel (silent killer)

Most common silent failure. Slack installs apps to the workspace without joining channels. The pairing DM (Step 5) works because DMs auto-route, but a channel test message (Step 6) hits silence — the bot literally isn't in the channel to see the event.

Walk the user:

1. Open Slack → navigate to the target channel.
2. Click the channel name (top of the panel) → Integrations tab.
3. Click Add an App → select your bot.
4. Confirm: the bot appears in the channel's member list.

Private channels need explicit invitation. If multiple channels, repeat. Wait for confirmation before proceeding.

Step 3: Configure tokens

Delegate:

/slack-channel:configure <xoxb-...> <xapp-...>

That skill validates token prefixes, writes ~/.claude/channels/slack/.env with 0o600 permissions, never echoes tokens back. Do not re-implement.

Step 4: Start the MCP server

bun install                                                # if not already
claude --channels plugin:slack-channel@claude-code-plugins

Node.js or Docker alternatives: see README.md § Quick Start Options B/C.

Step 5: Pair account

1. User DMs the bot in Slack (any short message).
2. Bot replies with a 6-character pairing code.
3. Delegate: /slack-channel:access pair <code>.
4. Bot confirms: "Approved! You can now reach this session."

Step 6: Verification round-trip

User sends @<bot> hello in the channel from Step 2.

• Reply within 10s → success. Move to Step 7.
• Silence → run /slack-channel:install doctor to diagnose, then /slack-channel:install repair to fix.

Step 7: Optional next steps

Ask the user if they want any of these:

Mode: doctor

Health check an existing install. Reports a structured pass/fail per check, no mutations. Suggests /slack-channel:install repair if fixable issues are found.

Doctor dependencies

The doctor checks below shell out to curl and jq. curl is preinstalled on virtually every dev system; jq may not be. Verify before running:

command -v curl >/dev/null && command -v jq >/dev/null || echo "Install jq: brew install jq  (macOS)  |  sudo apt install jq  (Debian/Ubuntu)"

The checks also need $SLACK_BOT_TOKEN and $SLACK_APP_TOKEN in the environment. Load them from the user's .env before running any check that references them:

set -a; . ~/.claude/channels/slack/.env; set +a

If the user prefers not to export the tokens (some shells leak env to child processes / process listings), substitute the literal token values inline — the doctor commands tolerate either form.

Checks

Run all in order:

1. State directory exists: ~/.claude/channels/slack/ is a directory with mode 0700.
2. .env exists, is mode 0600, owned by current user.
3. .env contains both tokens with valid prefixes (xoxb- and xapp-).
4. Bot token is live: curl -s -H "Authorization: Bearer $SLACK_BOT_TOKEN" https://slack.com/api/auth.test | jq -e '.ok == true'. Reports the bot_id and team if live; "invalid_auth" / "token_revoked" / "account_inactive" if not.
5. App token has connections:write: curl -s -X POST -H "Authorization: Bearer $SLACK_APP_TOKEN" https://slack.com/api/apps.connections.open | jq -e '.ok == true and (.url | startswith("wss://"))'. Expects ok: true and a wss:// URL. Failure modes: "not_authed" (token missing), "missing_scope" (token lacks connections:write), "token_revoked" (regenerate).
6. access.json exists, is mode 0600, parses as valid JSON: [ -f ~/.claude/channels/slack/access.json ] && jq empty ~/.claude/channels/slack/access.json.
7. allowFrom is non-empty: jq -e '.allowFrom | length > 0' ~/.claude/channels/slack/access.json. If empty, user has not completed Step 5.
8. Audit log integrity: if audit.log exists, run bun server.ts --verify-audit-log ~/.claude/channels/slack/audit.log. Report hash-chain status.
9. Claude Code version ≥ v2.1.80 and claude.ai login present: claude --version and claude auth status.
10. Bot is in channel(s) configured in access.json.channels: for each opted-in channel, curl -s -H "Authorization: Bearer $SLACK_BOT_TOKEN" "https://slack.com/api/conversations.members?channel=$CHANNEL_ID" | jq -e --arg bot "$BOT_USER_ID" '.members | index($bot) != null'. THIS catches the silent-killer Step 2 omission.

Report format:

✅ State directory       /home/.../slack (0700)
✅ Token file            .env (0600)
✅ Bot token             active — team=acme, bot_id=U0123
✅ App token             active — connections:write
✅ Access file           access.json (0600, valid JSON)
⚠️  Paired users          0 (run pairing flow — Step 5)
✅ Audit chain           verified — 1247 events, no breaks   # event count is an example
✅ Claude Code           v2.4.1, claude.ai session active
❌ Bot in channel        C_OPS opted-in but bot is NOT a member  ← silent killer
                         Fix: open #ops → Integrations → Add an App

Exit code: 0 if all green, 1 if any ⚠️ or ❌. Print Suggested next: /slack-channel:install repair if any fixable issue.

Mode: verify

Just the Step 6 verification round-trip. Useful after repair or after restarting Claude. Tells the user:

Send @<bot> hello in any channel where the bot is added. I'll wait up to 30 seconds for a reply event in the journal.

Tail audit.log for the next 30s looking for gate.allowed followed by reply.sent. Report success or timeout. On timeout, suggest doctor.

Mode: repair

Auto-fix the issues doctor found that are safely fixable:

NEVER auto-modify access.json content beyond the corrupt-restart case above. NEVER auto-modify the audit log. Both are append-only / engineer-edit-only.

After repair, re-run doctor and show before/after.