API Connector Builder
affaan-m/ECC
Build a new API connector or provider by matching the target repo's existing integration pattern exactly.
泛微E10 ESB 中心自定义触发动作流的取模板与执行能力：先用 esb.input-format 取入参模板，确认后用 esb.trigger.prepare / esb.trigger.apply 触发动作流，通过 weaver-work-cli esb 命令执行。本技能为泛微eteams数智办公云平台连接器配套使用，CLI 安装与登录地址由连接器提供。
No licenceAuto-check passed
Install Weaver E10 Esb Connector
$ npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install infometa/workbuddyskills weaver-e10-esb-connector --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/infometa/workbuddyskills.git skills-src && mkdir -p .claude/skills && cp -r skills-src/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector .claude/skills/weaver-e10-esb-connector && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "weaver-e10-esb-connector" agent skill from https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector into .claude/skills/weaver-e10-esb-connector/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "weaver-e10-esb-connector", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connectorType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install infometa/workbuddyskills weaver-e10-esb-connector --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/infometa/workbuddyskills.git skills-src && mkdir -p .agents/skills && cp -r skills-src/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector .agents/skills/weaver-e10-esb-connector && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "weaver-e10-esb-connector" agent skill from https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector into .agents/skills/weaver-e10-esb-connector/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "weaver-e10-esb-connector", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install infometa/workbuddyskills weaver-e10-esb-connector --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/infometa/workbuddyskills.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector .cursor/skills/weaver-e10-esb-connector && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "weaver-e10-esb-connector" agent skill from https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector into .cursor/skills/weaver-e10-esb-connector/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "weaver-e10-esb-connector", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/infometa/workbuddyskills.git --path connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install infometa/workbuddyskills weaver-e10-esb-connector --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/infometa/workbuddyskills.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector .gemini/skills/weaver-e10-esb-connector && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "weaver-e10-esb-connector" agent skill from https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector into .gemini/skills/weaver-e10-esb-connector/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "weaver-e10-esb-connector", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install infometa/workbuddyskills weaver-e10-esb-connectorInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/infometa/workbuddyskills.git skills-src && mkdir -p .github/skills && cp -r skills-src/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector .github/skills/weaver-e10-esb-connector && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "weaver-e10-esb-connector" agent skill from https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector into .github/skills/weaver-e10-esb-connector/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "weaver-e10-esb-connector", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install infometa/workbuddyskills weaver-e10-esb-connector --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/infometa/workbuddyskills.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector .opencode/skills/weaver-e10-esb-connector && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "weaver-e10-esb-connector" agent skill from https://github.com/infometa/workbuddyskills/tree/main/connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector into .opencode/skills/weaver-e10-esb-connector/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "weaver-e10-esb-connector", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
weaver-e10-esb-connector- GitHub stars
- 348
- Token cost
- ~1.1k tokens
- SKILL.md length
- 218 words
- Files
- 4 (incl. references)
- Skills in repo
- 218
- Repo updated
- First seen
- Licence
- None found
At a glance
泛微E10 ESB 中心自定义触发动作流的取模板与执行能力：先用 esb.input-format 取入参模板，确认后用 esb.trigger.prepare / esb.trigger.apply 触发动作流，通过 weaver-work-cli esb 命令执行。本技能为泛微eteams数智办公云平台连接器配套使用，CLI 安装与登录地址由连接器提供。
- Works in 6 steps: 确认目标动作流：用户给的是动作流 ID。只给名称时向用户索取 ID（或… → 取模板（推荐）：esb.input-format 取回 customParams… → prepare：esb.trigger.prepare… → …
- SKILL.md covers 命令入口, 高优先级语义, Reference 路由表 and 处理链（触发动作流必须按此顺序）, plus 4 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Weaver E10 Esb Connector is an agent skill from infometa/workbuddyskills. 泛微E10 ESB 中心自定义触发动作流的取模板与执行能力：先用 esb.input-format 取入参模板，确认后用 esb.trigger.prepare / esb.trigger.apply 触发动作流，通过 weaver-work-cli esb 命令执行。本技能为泛微eteams数智办公云平台连接器配套使用，CLI 安装与登录地址由连接器提供。
Its SKILL.md is about 1.1k tokens, which your agent loads only when the skill is triggered. The skill folder holds 4 other files, including reference files (for example `references/input-format.md`, `references/source-manifest.json` and `references/trigger.md`).
The repository describes itself as: WorkBuddy skills / connectors / experts archive for offline study.
Example prompts
- “/weaver-e10-esb-connector”
Workflow steps
6 steps, taken from the first numbered list in SKILL.md.
- 确认目标动作流：用户给的是动作流 ID。只给名称时向用户索取 ID（或 primary_key），不要猜测。
- 取模板（推荐）：esb.input-format 取回 customParams 模板，按模板组装业务字段；模板中的 #可选 占位替换为真实值或删除。
- prepare：esb.trigger.prepare 做只读回查与请求体组装，返回 requestPreview 与 continuation（有效期 10 分钟）。此步不触发动作流。
- 向用户确认：把目标动作流、触发人员、请求体摘要和副作用风险展示给用户，取得明确确认。
- apply：esb.trigger.apply 传 continuation 与 confirm: true 执行。confirm 必须显式为 true。
- 结果判读：resultCode=200 为成功，按 followUp 与 actionData 处理页面动作、提醒与返回数据。
What it can do on your machine
Read from SKILL.md and the folder at commit 91b77ea. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md (its code samples are powershell and bash).
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Weaver E10 Esb Connector loads about 1.1k tokens when it runs, and up to ~5.1k if it reads all its reference files. Until then it costs about 51 tokens; SKILL.md has 218 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
Without a licence we can't republish the file, so here is its outline and opening line. It has 218 words (~1,118 tokens).
“CRITICAL — 开始前 MUST 先用 Read 工具读取 ../weaver-e10-shared-connector/SKILL.md，其中包含安装、E10 认证、JSON 输出和高风险写入规则。该文件由连接器随包提供，读取失败时必须停止执行；不要自行安装 CLI 或 Skill。”
- name
- weaver-e10-esb-connector
- display_name
- 泛微E10 ESB动作流执行
- display_name_en
- Weaver E10 ESB ActionFlow Execution
- description_zh
- 泛微E10 ESB 中心自定义触发动作流：取入参模板，再用 prepare → apply 确认链触发动作流，通过 weaver-work-cli esb 命令执行。本技能为泛微eteams数智办公云平台连接器配套使用，CLI 安装与登录地址由连接器提供。
- description_en
- Query custom ESB action flow input templates and trigger action flows through the weaver-work-cli esb command with a prepare/apply confirmation chain. For use…
- version
- 1.0.0
- author
- 泛微网络科技股份有限公司
- requires.bins
- weaver-work-cli
- cliHelp
- weaver-work-cli esb --help
Files
SKILL.md and 3 other files (references) in connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector of infometa/workbuddyskills.
- SKILL.md
- references/input-format.md
- references/source-manifest.json
- references/trigger.md
Open the folder on GitHubat commit 91b77ea
Compare with similar skills
Weaver E10 Esb Connector next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Weaver E10 Esb Connector this skillinfometa/workbuddyskills | 348 | — | ~1.1k | Automated safety check: Pass | None | |
| API Connector Builderaffaan-m/ECC | 276k | 2 repos | ~666 | Automated safety check: Pass | MIT | |
| Search Inputthedaviddias/Front-End-Checklist | 74k | — | ~402 | Automated safety check: Pass | MIT | |
| Input Typesthedaviddias/Front-End-Checklist | 74k | — | ~487 | Automated safety check: Pass | MIT | |
| Paste Inputsthedaviddias/Front-End-Checklist | 74k | — | ~443 | Automated safety check: Pass | MIT | |
| Validate Connectorsimstudioai/sim | 30k | — | ~5.7k | Automated safety check: Pass | Apache-2.0 |
Similar skills
Search Input
thedaviddias/Front-End-Checklist
A skill your agent uses when reviewing templates, rendered HTML, or shared components related to Make search inputs accessible.
Input Types
thedaviddias/Front-End-Checklist
A skill your agent uses when reviewing templates, rendered HTML, or shared components related to Use semantic input type attributes.
Paste Inputs
thedaviddias/Front-End-Checklist
A skill your agent uses when reviewing rendered HTML, interactive components, or design-system patterns related to Allow pasting into form inputs.
Validate Connector
simstudioai/sim
Validate an existing knowledge base connector against its service's API docs
Add Connector
simstudioai/sim
Add or update a Sim knowledge base connector for syncing documents from an external source, including auth mode, config fields, pagination, document mapping, tags, and registry wiring.
More from infometa/workbuddyskills
All 218 skills in this repoCampus Event Playbook
infometa/workbuddyskills
This skill should be used when planning, coordinating, running, or reviewing student-led campus events, including club recruitment, freshman mixers, welcome activities, small talks, competitions…
Teachany
infometa/workbuddyskills
K-12 interactive courseware creation. An agent skill from infometa/workbuddyskills.
Weight Management HTML
infometa/workbuddyskills
A skill your agent uses when the adult weight-management MCP needs to be installed/set up in WorkBuddy (connector) or its result must be rendered as a standalone Chinese HTML plan.
Agent Browser
infometa/workbuddyskills
A skill your agent uses when the user needs browser automation, including opening web pages, taking screenshots, extracting page content, clicking elements, filling forms, or testing web flows.
AI Research Radar
infometa/workbuddyskills
定时任务：每日研究简报。漏掉重要论文和行业报告？每天帮你盯着，关键信息一条不漏 This skill should be used when the user asks about 定时任务：每日研究简报.
Check Deck
infometa/workbuddyskills
Investment banking presentation quality checker. An agent skill from infometa/workbuddyskills.
Questions about Weaver E10 Esb Connector
What does Weaver E10 Esb Connector do?
泛微E10 ESB 中心自定义触发动作流的取模板与执行能力：先用 esb.input-format 取入参模板，确认后用 esb.trigger.prepare / esb.trigger.apply 触发动作流，通过 weaver-work-cli esb 命令执行。本技能为泛微eteams数智办公云平台连接器配套使用，CLI 安装与登录地址由连接器提供。. Weaver E10 Esb Connector is an agent skill from infometa/workbuddyskills.
How do I install Weaver E10 Esb Connector in Claude Code?
Run `npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a claude-code`. Or copy the skill folder (connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector in infometa/workbuddyskills) into .claude/skills/weaver-e10-esb-connector in your project. Claude Code loads it when a task matches its description.
How do I install Weaver E10 Esb Connector in Codex?
Run `npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a codex`. Or copy the skill folder (connectors/weaver-eteams-connector/skills/weaver-e10-esb-connector in infometa/workbuddyskills) into .agents/skills/weaver-e10-esb-connector in your project. Codex loads it when a task matches its description.
Can I use Weaver E10 Esb Connector in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add infometa/workbuddyskills --skill weaver-e10-esb-connector -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/weaver-e10-esb-connector, .gemini/skills/weaver-e10-esb-connector, .github/skills/weaver-e10-esb-connector and .opencode/skills/weaver-e10-esb-connector in your project.
What does Weaver E10 Esb Connector need to run?
SKILL.md names no scripts, command-line tools or credentials: Weaver E10 Esb Connector is instructions for the agent only.
Does Weaver E10 Esb Connector access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Weaver E10 Esb Connector safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Weaver E10 Esb Connector use?
No licence was found for Weaver E10 Esb Connector or its repository. Without one, default copyright applies: ask the author before reusing or redistributing it.
How many tokens does Weaver E10 Esb Connector use?
About 1.1k tokens (SKILL.md is roughly 4.5k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full. Its references folder adds about 4k tokens, read only when the agent opens those files.
What are the alternatives to Weaver E10 Esb Connector?
Skills that share tags, products or a category with Weaver E10 Esb Connector: API Connector Builder (affaan-m/ECC, 276k stars), Search Input (thedaviddias/Front-End-Checklist, 74k stars), Input Types (thedaviddias/Front-End-Checklist, 74k stars) and Paste Inputs (thedaviddias/Front-End-Checklist, 74k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Weaver E10 Esb Connector?
infometa (a GitHub user) maintains it in infometa/workbuddyskills, which has 348 GitHub stars. The repository holds 218 skills in this directory. The repository was last updated on October 9, 2026.
Source: infometa/workbuddyskills on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.