Frontend Textbooks
onepixelaway/frontend-textbooks
Turns a manuscript into a designed US Letter HTML book with a matching PDF, original cover art and checks that the manuscript text is preserved.
This skill should be used when an architect or structural designer needs to verify PDF-backed concrete wall requirements such as minimum wall thickness, high-shear minimum reinforcement, bar…
Install Concrete Wall Design
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-wall-design --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .claude/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design' .claude/skills/concrete-wall-design && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "concrete-wall-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-design into .claude/skills/concrete-wall-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-wall-design", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-designType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-wall-design --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .agents/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design' .agents/skills/concrete-wall-design && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "concrete-wall-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-design into .agents/skills/concrete-wall-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-wall-design", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-wall-design --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design' .cursor/skills/concrete-wall-design && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "concrete-wall-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-design into .cursor/skills/concrete-wall-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-wall-design", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git --path 'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design'--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-wall-design --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design' .gemini/skills/concrete-wall-design && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "concrete-wall-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-design into .gemini/skills/concrete-wall-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-wall-design", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-wall-designInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .github/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design' .github/skills/concrete-wall-design && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "concrete-wall-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-design into .github/skills/concrete-wall-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-wall-design", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-wall-design --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design' .opencode/skills/concrete-wall-design && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "concrete-wall-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%89%86%E8%A8%AD%E8%A8%88/concrete-wall-design into .opencode/skills/concrete-wall-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-wall-design", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
concrete-wall-design- GitHub stars
- 158
- Token cost
- ~1.8k tokens
- SKILL.md length
- 746 words
- Files
- 1
- Skills in repo
- 86
- Repo updated
- First seen
- Licence
- CC-BY-SA-4.0
At a glance
This skill should be used when an architect or structural designer needs to verify PDF-backed concrete wall requirements such as minimum wall thickness, high-shear minimum reinforcement, bar…
- Works in 4 steps: Add supplementary bars around the… → Double-layer walls: add at least 2 D16… → Single-layer walls: add at least 1 D16… → …
- Tasks that involve PDF
- SKILL.md covers Overview, Section 1: Wall Classification, Section 2: Minimum Wall… and Section 3: Minimum…, plus 6 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Concrete Wall Design is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. This skill should be used when an architect or structural designer needs to verify PDF-backed concrete wall requirements such as minimum wall thickness, high-shear minimum reinforcement, bar spacing, and opening reinforcement in Taiwan's concrete structure design code.
Its SKILL.md is about 1.8k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts. Compatibility notes: claude-code,opencode,agent-skills
It sits in Documents & Office, covering PDF. The repository describes itself as: 一個開源的台灣AEC產業知識庫，只要你願意共享經驗與知識就歡迎加入我們. The licence is CC-BY-SA-4.0.
When your agent uses it
- Tasks that involve PDF
Example prompts
- “/concrete-wall-design”
Requirements
- Python 3
- Compatibility (from SKILL.md): claude-code,opencode,agent-skills
Workflow steps
4 steps, taken from the first numbered list in SKILL.md.
- Add supplementary bars around the opening so that the interrupted reinforcement is replaced
- Double-layer walls: add at least 2 D16 bars in both directions around the opening
- Single-layer walls: add at least 1 D16 bar in both directions around the opening
- Anchorage must develop fy at the opening corners
What it can do on your machine
Read from SKILL.md and the folder at commit 35ed06e. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md (its code samples are python).
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Compatibility
claude-code,opencode,agent-skills
From compatibility in the SKILL.md frontmatter.
Context cost
Concrete Wall Design loads about 1.8k tokens when it runs. Until then it costs about 73 tokens; SKILL.md has 746 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from h30190/HJPLUS_Taiwan_Architect_KB at commit 35ed06e, republished under its CC-BY-SA-4.0 licence (© h30190). 746 words, ~1,755 tokens.
Download SKILL.mdSave it as
.claude/skills/concrete-wall-design/SKILL.md (or your agent's skills folder).- name
- concrete-wall-design
- description
- This skill should be used when an architect or structural designer needs to verify PDF-backed concrete wall requirements such as minimum wall thickness, high-shear minimum reinforcement, bar spacing, and opening reinforcement in Taiwan's concrete structure design code.
- compatibility
- claude-code,opencode,agent-skills
- type
- Skill
- user-invocable
- true
- license
- CC-BY-SA-4.0
- metadata.audience
- architects
- metadata.region
- taiwan
- metadata.class
- C
- metadata.regulation
- 建築物混凝土結構設計規範
Concrete Wall Design
Overview
Design requirements for reinforced concrete walls in Taiwan, limited here to clauses directly verified against the uploaded PDF: minimum wall thickness, high-shear minimum reinforcement, spacing limits, and opening reinforcement. Special seismic-wall and boundary-element checks remain chapter references only unless directly transcribed from Chapter 18. For cover and splice fundamentals, see concrete-general-requirements.
Section 1: Wall Classification
1.1 By Function
| Type | Primary Load | Design Focus |
|---|---|---|
| Bearing wall (承重牆) | Axial (gravity) loads | Axial capacity, slenderness |
| Structural wall (結構牆 / 剪力牆) | Lateral (seismic/wind) in-plane shear | Shear capacity, Chapter 11 and Chapter 18 checks |
| Retaining wall (擋土牆) | Earth pressure (out-of-plane) | Refer to foundation and retaining-wall clauses when applicable |
| Non-structural wall (非結構牆) | Self-weight only | Minimum reinforcement, crack control |
1.2 By Reinforcement Layout
| Type | Condition | Minimum Layers |
|---|---|---|
| Single layer | General wall cases per detailing layout | 1 layer when permitted by design and detailing clauses |
| Double layer | Wall thickness > 25 cm, except stated exceptions in 11.7.2.3 | 2 layers near each face |
Section 2: Minimum Wall Thickness
2.1 Bearing Wall Minimum Thickness
$$h_{wall} \geq \max\left(\frac{l_c}{25},\ 100\ \text{mm}\right)$$
Where lc = unsupported height or length (whichever is shorter).
For a wall with clear height = 3000 mm: h_min = 3000/25 = 120 mm
Source: 11.3.1.1, Table 11.3.1.1.
2.2 Shear Wall Minimum Thickness
- Non-seismic: same as bearing wall (lc/25, min 100 mm)
- Special structural walls: follow Chapter 18 requirements directly
Section 3: Minimum Reinforcement Ratios
3.1 Minimum Vertical Reinforcement (縱向鋼筋比 ρl)
$$\rho_l = \frac{A_{sv}}{A_g}$$
For general walls with low shear demand, minimum vertical reinforcement must be taken directly from Table 11.6.1.
For higher shear demand, the verified requirement is:
$$\rho_l \geq 0.0025 + 0.5(2.5 - h_w/l_w)(\rho_t - 0.0025)$$
and not less than 0.0025.
Source: 11.6.2(a).
3.2 Minimum Horizontal Reinforcement (橫向鋼筋比 ρt)
$$\rho_t = \frac{A_{sh}}{A_g}$$
For general walls with low shear demand, minimum horizontal reinforcement must be taken directly from Table 11.6.1.
For higher shear demand, the verified requirement is:
$$\rho_t \geq 0.0025$$
Note: When shear demand is high, use the Chapter 11.6.2 equation:
$\rho_l \geq 0.0025 + 0.5(2.5 - h_w/l_w)(\rho_t - 0.0025)$ and $\rho_t \geq 0.0025$.
Source: 11.6.2(b).
3.3 Maximum Bar Spacing
For cast-in-place walls:
- vertical bar spacing $s \leq \min(3h, 45\text{ cm})$
- horizontal bar spacing $s \leq \min(3h, 45\text{ cm})$
If in-plane strength requires shear reinforcement:
- vertical spacing $s \leq l_w/3$
- horizontal spacing $s \leq l_w/5$
If wall thickness is greater than 25 cm, distributed reinforcement in each direction must be in at least two layers near the wall faces, except for the exceptions listed in 11.7.2.3.
Source: 11.7.2.1, 11.7.3.1, 11.7.2.3.
Section 4: Opening Supplementary Reinforcement (開口補強)
4.1 Opening Reinforcement Rules Verified from the PDF
For each interrupted bar:
- Add supplementary bars around the opening so that the interrupted reinforcement is replaced
- Double-layer walls: add at least 2 D16 bars in both directions around the opening
- Single-layer walls: add at least 1 D16 bar in both directions around the opening
- Anchorage must develop fy at the opening corners
These requirements are taken from clause 11.7.5.1.
Source: 11.7.5.1.
Show full SKILL.md (264 more words)Show less
Section 5: Special Seismic Wall Requirements
Special structural walls, boundary elements, and other seismic wall detailing must be checked directly against Chapter 18. This skill intentionally does not retain unverified boundary-element trigger formulas.
Section 6: Splice and Development Checks
Wall bar development and splices must be checked directly against Chapters 25.4 and 25.5, plus Chapter 18 when the wall is part of the seismic-force-resisting system.
Section 7: AI Design Check Table — Wall
| Check | Condition | AI Action |
|---|---|---|
| Min thickness (bearing) | h < lc/25 or 100mm | ERROR: Wall too thin for bearing wall requirement. |
| Min thickness (non-bearing) | h < lc/30 or 100mm | ERROR: Wall too thin for non-bearing wall requirement. |
| Min vert. rebar ratio | High-shear wall does not satisfy 11.6.2 vertical-steel equation | ERROR: Insufficient vertical reinforcement. |
| Min horiz. rebar ratio | High-shear wall has ρt < 0.0025 | ERROR: Insufficient horizontal reinforcement. |
| Vertical spacing | Cast-in-place wall s > min(3h, 45cm) or, if shear steel required, s > lw/3 | ERROR: Vertical bar spacing exceeds code limit. |
| Horizontal spacing | Cast-in-place wall s > min(3h, 45cm) or, if shear steel required, s > lw/5 | ERROR: Horizontal bar spacing exceeds code limit. |
| Double layer required | h > 25cm and distributed steel not arranged in at least two layers near faces | ERROR: Two layers required by 11.7.2.3. |
| Opening — bars | Opening interrupts wall bars with no D16 replacement bars | ERROR: Add supplementary bars around opening. |
| Seismic wall check | Wall is part of the seismic system but Chapter 18 review not performed | WARNING: Verify special structural wall rules directly from Chapter 18. |
Section 8: MCP Tool Examples
# Search for wall minimum reinforcement requirements
taiwan-building-code_search_building_code(query="牆 最小鋼筋比 垂直 水平 牆板", limit=10)
# Search for opening supplementary reinforcement
taiwan-building-code_search_building_code(query="牆 開口 開孔 補強 對角鋼筋", limit=10)
# Search for shear wall seismic requirements
taiwan-building-code_search_building_code(query="剪力牆 耐震 邊緣構件 boundary element", limit=10)
# Search for wall thickness requirements
taiwan-building-code_search_building_code(query="牆 最小厚度 承重牆 淨高", limit=10)
# Official interpretations
taiwan-building-code_search_building_interpretations(query="剪力牆 邊緣構件 判斷 圍束")Additional Resources
- General requirements (cover, development length, splice): concrete-general-requirements
- Column confinement (referenced by boundary elements): concrete-column-design
© h30190, CC-BY-SA-4.0. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design of h30190/HJPLUS_Taiwan_Architect_KB.
Open the folder on GitHubat commit 35ed06e
Compare with similar skills
Concrete Wall Design next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Concrete Wall Design this skillh30190/HJPLUS_Taiwan_Architect_KB | 158 | — | ~1.8k | Automated safety check: Pass | CC-BY-SA-4.0 | |
| Frontend Textbooksonepixelaway/frontend-textbooks | 107 | — | ~3.5k | Automated safety check: Pass | MIT | |
| Illustrator Preflightie3jp/illustrator-mcp-server | 157 | — | ~2.2k | Automated safety check: Pass | MIT | |
| Kicadaklofas/kicad-happy | 1.4k | 1 repos | ~20k | Automated safety check: Pass | MIT | |
| Frappe Syntax PrintImpertio-Studio/Frappe_Claude_Skill_Package | 189 | — | ~3k | Automated safety check: Pass | MIT | |
| Field Service Data Capture Form Designer Configureforcedotcom/sf-skills | 1.1k | — | ~2.5k | Automated safety check: Pass | Apache-2.0 |
Similar skills
Illustrator Preflight
ie3jp/illustrator-mcp-server
Run comprehensive pre-press preflight checks on Adobe Illustrator documents using illustrator-mcp tools.
Kicad
aklofas/kicad-happy
Analyze KiCad projects and PDF schematics: schematics, PCB layouts, Gerbers, footprints, symbols, netlists, and design rules.
Frappe Syntax Print
Impertio-Studio/Frappe_Claude_Skill_Package
A skill your agent uses when creating print formats or generating PDFs in Frappe v14-v16.
Field Service Data Capture Form Designer Configure
forcedotcom/sf-skills
Design a Field Service Mobile Data Capture Flow from either a natural-language description OR a PDF/image of an existing paper form.
Instagram Post Downloader
mohitagw15856/pm-claude-skills
Download and save Instagram posts as high-resolution files. An agent skill from mohitagw15856/pm-claude-skills.
More from h30190/HJPLUS_Taiwan_Architect_KB
All 86 skills in this repoGreen Material Search Toolkit
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect or consultant needs to search Taiwan's TABC (財團法人臺灣建築中心) green building material certification database, assemble a set of qualified materials for a…
Skill Name Hyphenated
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when [specific trigger scenarios].
Taichung Land Parcel Query
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect receives just an address or lot number (地號) for a site in Taichung City, Taiwan, and needs the land's basic data — zoning, registered land area, land…
Permit Report Data Mapping
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when mapping a legacy CPAMI permit report identifier to its actual BMS data groups, computed display fields, or unresolved template dependencies.
Revit AI Targeting And Safe Execution
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an AI agent, MCP tool, Revit add-in, or automation must inspect or change a live Revit model and needs to prove its target set, choose bounded read-only context…
Smoke Exhaust Review
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when evaluating smoke exhaust compliance for buildings in Taiwan, including windowless floor determination, smoke compartment partitioning, smoke exhaust window effective…
Related
Categories
Questions about Concrete Wall Design
What does Concrete Wall Design do?
This skill should be used when an architect or structural designer needs to verify PDF-backed concrete wall requirements such as minimum wall thickness, high-shear minimum reinforcement, bar…. Concrete Wall Design is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. This skill should be used when an architect or structural designer needs to verify PDF-backed concrete wall requirements such as minimum wall thickness, high-shear minimum reinforcement, bar spacing, and opening reinforcement in Taiwan's concrete structure design code.
When should I use Concrete Wall Design?
Concrete Wall Design fits situations like: tasks that involve PDF.
How do I install Concrete Wall Design in Claude Code?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a claude-code`. Or copy the skill folder (raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design in h30190/HJPLUS_Taiwan_Architect_KB) into .claude/skills/concrete-wall-design in your project. Claude Code loads it when a task matches its description.
How do I install Concrete Wall Design in Codex?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a codex`. Or copy the skill folder (raw/建築施工與材料/混凝土結構設計/混凝土牆設計/concrete-wall-design in h30190/HJPLUS_Taiwan_Architect_KB) into .agents/skills/concrete-wall-design in your project. Codex loads it when a task matches its description.
Can I use Concrete Wall Design in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-wall-design -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/concrete-wall-design, .gemini/skills/concrete-wall-design, .github/skills/concrete-wall-design and .opencode/skills/concrete-wall-design in your project.
What does Concrete Wall Design need to run?
SKILL.md names no scripts, command-line tools or credentials: Concrete Wall Design is instructions for the agent only. Our summary lists: Python 3. Compatibility (from SKILL.md): claude-code,opencode,agent-skills.
Does Concrete Wall Design access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Concrete Wall Design safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Concrete Wall Design use?
Concrete Wall Design is published under the CC-BY-SA-4.0 licence (declared in SKILL.md). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Concrete Wall Design use?
About 1.8k tokens (SKILL.md is roughly 7k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Concrete Wall Design?
Skills that share tags, products or a category with Concrete Wall Design: Frontend Textbooks (onepixelaway/frontend-textbooks, 107 stars), Illustrator Preflight (ie3jp/illustrator-mcp-server, 157 stars), Kicad (aklofas/kicad-happy, 1.4k stars) and Frappe Syntax Print (Impertio-Studio/Frappe_Claude_Skill_Package, 189 stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Concrete Wall Design?
h30190 (a GitHub user) maintains it in h30190/HJPLUS_Taiwan_Architect_KB, which has 158 GitHub stars. The repository holds 86 skills in this directory. The repository was last updated on October 8, 2026.
Source: h30190/HJPLUS_Taiwan_Architect_KB on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.