Fern Components
ai-dynamo/dynamo
Knowledge of Fern's built-in MDX component library (accordions, callouts, cards, steps, tabs, code blocks, API-reference snippets, and more) for authoring docs pages.
This skill should be used when an architect or structural designer needs to verify PDF-backed concrete slab requirements such as minimum slab thickness, minimum flexural reinforcement, and…
Install Concrete Slab Design
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-slab-design --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .claude/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design' .claude/skills/concrete-slab-design && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "concrete-slab-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-design into .claude/skills/concrete-slab-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-slab-design", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-designType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-slab-design --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .agents/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design' .agents/skills/concrete-slab-design && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "concrete-slab-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-design into .agents/skills/concrete-slab-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-slab-design", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-slab-design --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design' .cursor/skills/concrete-slab-design && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "concrete-slab-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-design into .cursor/skills/concrete-slab-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-slab-design", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git --path 'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design'--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-slab-design --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design' .gemini/skills/concrete-slab-design && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "concrete-slab-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-design into .gemini/skills/concrete-slab-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-slab-design", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-slab-designInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .github/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design' .github/skills/concrete-slab-design && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "concrete-slab-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-design into .github/skills/concrete-slab-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-slab-design", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install h30190/HJPLUS_Taiwan_Architect_KB concrete-slab-design --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/h30190/HJPLUS_Taiwan_Architect_KB.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/'raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design' .opencode/skills/concrete-slab-design && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "concrete-slab-design" agent skill from https://github.com/h30190/HJPLUS_Taiwan_Architect_KB/tree/main/raw/%E5%BB%BA%E7%AF%89%E6%96%BD%E5%B7%A5%E8%88%87%E6%9D%90%E6%96%99/%E6%B7%B7%E5%87%9D%E5%9C%9F%E7%B5%90%E6%A7%8B%E8%A8%AD%E8%A8%88/%E6%B7%B7%E5%87%9D%E5%9C%9F%E6%9D%BF%E8%A8%AD%E8%A8%88/concrete-slab-design into .opencode/skills/concrete-slab-design/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "concrete-slab-design", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
concrete-slab-design- GitHub stars
- 158
- Token cost
- ~1.6k tokens
- SKILL.md length
- 671 words
- Files
- 1
- Skills in repo
- 86
- Repo updated
- First seen
- Licence
- CC-BY-SA-4.0
At a glance
This skill should be used when an architect or structural designer needs to verify PDF-backed concrete slab requirements such as minimum slab thickness, minimum flexural reinforcement, and…
- Documents & Office work in your project
- SKILL.md covers Overview, Section 1: Code Navigation, Section 2: Minimum Slab… and Section 3: Flexural…, plus 5 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Concrete Slab Design is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. This skill should be used when an architect or structural designer needs to verify PDF-backed concrete slab requirements such as minimum slab thickness, minimum flexural reinforcement, and shrinkage/temperature reinforcement rules in Taiwan's concrete structure design code.
Its SKILL.md is about 1.6k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts. Compatibility notes: claude-code,opencode,agent-skills
It sits in Documents & Office. The repository describes itself as: 一個開源的台灣AEC產業知識庫，只要你願意共享經驗與知識就歡迎加入我們. The licence is CC-BY-SA-4.0.
When your agent uses it
- Documents & Office work in your project
Example prompts
- “/concrete-slab-design”
Requirements
- Python 3
- Compatibility (from SKILL.md): claude-code,opencode,agent-skills
What it can do on your machine
Read from SKILL.md and the folder at commit 35ed06e. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md (its code samples are python).
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Compatibility
claude-code,opencode,agent-skills
From compatibility in the SKILL.md frontmatter.
Context cost
Concrete Slab Design loads about 1.6k tokens when it runs. Until then it costs about 74 tokens; SKILL.md has 671 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from h30190/HJPLUS_Taiwan_Architect_KB at commit 35ed06e, republished under its CC-BY-SA-4.0 licence (© h30190). 671 words, ~1,649 tokens.
Download SKILL.mdSave it as
.claude/skills/concrete-slab-design/SKILL.md (or your agent's skills folder).- name
- concrete-slab-design
- description
- This skill should be used when an architect or structural designer needs to verify PDF-backed concrete slab requirements such as minimum slab thickness, minimum flexural reinforcement, and shrinkage/temperature reinforcement rules in Taiwan's concrete structure design code.
- compatibility
- claude-code,opencode,agent-skills
- type
- Skill
- user-invocable
- true
- license
- CC-BY-SA-4.0
- metadata.audience
- architects
- metadata.region
- taiwan
- metadata.class
- C
- metadata.regulation
- 建築物混凝土結構設計規範
Concrete Slab Design
Overview
Design requirements for reinforced concrete slabs in Taiwan, limited here to items directly verified against the uploaded PDF: minimum slab thickness, minimum flexural steel, and shrinkage/temperature reinforcement rules. Slab-step, opening, and splice details are preserved only as chapter references unless directly transcribed from the source. For cover and splice fundamentals, see concrete-general-requirements.
Section 1: Code Navigation
| Topic | Governing Clause |
|---|---|
| One-way slab minimum thickness | 7.3.1.1 |
| One-way slab minimum flexural steel | 7.6.1.1 |
| One-way shrinkage and temperature steel | 7.6.4, 7.7.6 |
| Two-way slab minimum thickness | 8.3.1.1 |
| Slab cover | 20.5.1.3.1 |
Structural classification between one-way and two-way slab systems should follow the designer's analysis model and the applicable chapter, rather than an unverified shorthand rule.
Section 2: Minimum Slab Thickness
2.1 One-Way Slab Minimum Thickness (Deflection Control)
For non-prestressed one-way slabs with fy = 420 MPa:
| Support Condition | Minimum h |
|---|---|
| Simply supported | L/20 |
| One end continuous | L/24 |
| Both ends continuous | L/28 |
| Cantilever | L/10 |
Multiply by (0.4 + fy/700) for fy ≠ 420 MPa. L = clear span length.
Source: 7.3.1.1, Table 7.3.1.1, 7.3.1.1.1.
2.2 Two-Way Slab Minimum Thickness
For non-prestressed two-way slabs, the minimum thickness depends on panel position and column head condition.
| Condition | fy = 420 MPa |
|---|---|
| No column head, outer panel, no edge beam | ln/30 |
| No column head, outer panel, with edge beam | ln/33 |
| No column head, inner panel | ln/33 |
| With column head, outer panel | ln/36 |
| With column head, inner panel | ln/36 |
Minimum absolute thickness:
- No column head: 125 mm
- With column head: 100 mm
Source: 8.3.1.1, Table 8.3.1.1.
2.3 Practical Minimum for Fire Resistance
Fire-resistance thickness may be governed by 建築技術規則 rather than slab-structure clauses alone. This skill does not restate fire-thickness numbers not transcribed from the governing fire code.
Section 3: Flexural Reinforcement
3.1 Minimum Flexural Reinforcement
For non-prestressed slabs, minimum flexural steel is:
$$A_{s,min} = 0.0018A_g$$
This is the same base ratio used for slab shrinkage and temperature reinforcement.
Source: 7.6.1.1.
3.2 Maximum Bar Spacing
Maximum bar spacing for slab flexural reinforcement:
- Critical sections: min(3h, 450 mm)
- Other sections: min(3h, 450 mm)
Where h = total slab thickness.
Section 4: Temperature and Shrinkage Reinforcement (溫度收縮筋)
4.1 Purpose
Temperature and shrinkage reinforcement controls cracking due to:
- Concrete drying shrinkage (乾縮)
- Seasonal temperature changes
- Creep effects
It is placed perpendicular to the flexural reinforcement in one-way slabs, and in both directions in slabs with equal reinforcement.
Key concept: Temperature/shrinkage steel is NOT structural — it does not increase load capacity. Its sole purpose is crack width control.
Show full SKILL.md (271 more words)Show less
4.2 Minimum Temperature/Shrinkage Reinforcement Ratio
$$\rho_{t&s} = \frac{A_s}{b \cdot h}$$ (gross slab area)
| Bar Type | Minimum ρt&s |
|---|---|
| Deformed bars and welded wire reinforcement | 0.0018 (0.18%) |
| Prestressed slab steel used for shrinkage/temperature control | See Chapter 24.4.3 |
Source: 7.6.4.1, 7.7.6.2.1.
4.3 Maximum Spacing for Temperature/Shrinkage Bars
Maximum spacing: min(5h, 450 mm)
Section 5: Development, Splice, and Opening Checks
This audit pass did not verify any slab-specific high-low-slab rule, opening-reinforcement rule, or numeric splice-length rule directly from the PDF. Therefore, this skill intentionally does not preserve those items as technical requirements.
When a project needs those checks, the AI should:
- resolve the applicable slab clause from the PDF if one exists,
- otherwise fall back to the general rebar development and splice clauses in Chapters 25.4 and 25.5,
- and avoid inventing slab-step or opening details not explicitly supported by the source.
Section 7: AI Design Check Table — Slab
| Check | Condition | AI Action |
|---|---|---|
| Min thickness (one-way) | h < L/20 (simply supported) | ERROR: Slab may not control deflection — verify thickness |
| Min thickness (two-way) | h below table 8.3.1.1 or 100/125mm minimum | ERROR: Two-way slab below minimum thickness |
| Temp/shrinkage ratio | ρt&s < 0.0018 | ERROR: Insufficient temperature/shrinkage reinforcement |
| Temp/shrinkage spacing | Bar spacing > min(5h, 450mm) | ERROR: Temperature/shrinkage bars too widely spaced |
| Flexural spacing | Bar spacing > min(3h, 450mm) at critical section | ERROR: Flexural bar spacing exceeds limit |
| Development / splice | Numeric ld or lap check required | WARNING: Resolve Chapter 25.4 and 25.5 from the PDF before checking. |
| Cover — interior slab | C < 20mm for slabs not exposed | ERROR: Insufficient cover for interior slab |
Section 8: MCP Tool Examples
# Search for slab minimum thickness
taiwan-building-code_search_building_code(query="版 最小厚度 撓度 one-way two-way", limit=10)
# Search for temperature/shrinkage reinforcement
taiwan-building-code_search_building_code(query="溫度收縮鋼筋比 版 最小量", limit=10)
# Search for slab opening requirements
taiwan-building-code_search_building_code(query="版 開口 開孔 補強 鋼筋", limit=10)
# Search for high-low slab (if referenced specifically in Taiwan code)
taiwan-building-code_search_building_code(query="高低版 搭接 版高差 段差", limit=10)
# Official interpretations
taiwan-building-code_search_building_interpretations(query="版 高低差 搭接 斜筋補強")Additional Resources
- General requirements (cover, development length, lap splice fundamentals): concrete-general-requirements
- Beam design (connected to slab as T-beam): concrete-beam-design
© h30190, CC-BY-SA-4.0. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design of h30190/HJPLUS_Taiwan_Architect_KB.
Open the folder on GitHubat commit 35ed06e
Compare with similar skills
Concrete Slab Design next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Concrete Slab Design this skillh30190/HJPLUS_Taiwan_Architect_KB | 158 | — | ~1.6k | Automated safety check: Pass | CC-BY-SA-4.0 | |
| Fern Componentsai-dynamo/dynamo | 8.3k | — | ~2.8k | Automated safety check: Pass | Apache-2.0 | |
| Fireworks Open Eli5yizhiyanhua-ai/fireworks-open-eli5 | 188 | — | ~2.2k | Automated safety check: Pass | Apache-2.0 | |
| Human Reviewpetergyang/human-review | 1.4k | — | ~2.1k | Automated safety check: Pass | MIT | |
| Frontend Textbooksonepixelaway/frontend-textbooks | 107 | — | ~3.5k | Automated safety check: Pass | MIT | |
| Illustrator Preflightie3jp/illustrator-mcp-server | 157 | — | ~2.2k | Automated safety check: Pass | MIT |
Similar skills
Fireworks Open Eli5
yizhiyanhua-ai/fireworks-open-eli5
Create evidence-aware, interactive visual explainers as self-contained offline HTML.
Human Review
petergyang/human-review
Open an HTML file, Markdown file, or localhost page in the browser so the user can edit text directly and leave comments on specific parts, then send all edits and comments back to you.
Frontend Textbooks
onepixelaway/frontend-textbooks
Turns a manuscript into a designed US Letter HTML book with a matching PDF, original cover art and checks that the manuscript text is preserved.
Illustrator Preflight
ie3jp/illustrator-mcp-server
Run comprehensive pre-press preflight checks on Adobe Illustrator documents using illustrator-mcp tools.
Planners Ppt Hell
thePlannerIvan/planners-ppt-hell
制作与持续修改 SVG 页面工作台，从逐页内容稿或 video-idea-system 的 visual-plan.json 与素材出发，输出可编辑 PPT 或固定版本的视频画面快照。用于页面返修、视觉参考复用及需人工确认的模板提炼入库；复杂原始材料先交 planners-bypage 展开。
More from h30190/HJPLUS_Taiwan_Architect_KB
All 86 skills in this repoGreen Material Search Toolkit
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect or consultant needs to search Taiwan's TABC (財團法人臺灣建築中心) green building material certification database, assemble a set of qualified materials for a…
Skill Name Hyphenated
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when [specific trigger scenarios].
Taichung Land Parcel Query
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an architect receives just an address or lot number (地號) for a site in Taichung City, Taiwan, and needs the land's basic data — zoning, registered land area, land…
Permit Report Data Mapping
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when mapping a legacy CPAMI permit report identifier to its actual BMS data groups, computed display fields, or unresolved template dependencies.
Revit AI Targeting And Safe Execution
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when an AI agent, MCP tool, Revit add-in, or automation must inspect or change a live Revit model and needs to prove its target set, choose bounded read-only context…
Smoke Exhaust Review
h30190/HJPLUS_Taiwan_Architect_KB
This skill should be used when evaluating smoke exhaust compliance for buildings in Taiwan, including windowless floor determination, smoke compartment partitioning, smoke exhaust window effective…
Related
Categories
Questions about Concrete Slab Design
What does Concrete Slab Design do?
This skill should be used when an architect or structural designer needs to verify PDF-backed concrete slab requirements such as minimum slab thickness, minimum flexural reinforcement, and…. Concrete Slab Design is an agent skill from h30190/HJPLUS_Taiwan_Architect_KB. This skill should be used when an architect or structural designer needs to verify PDF-backed concrete slab requirements such as minimum slab thickness, minimum flexural reinforcement, and shrinkage/temperature reinforcement rules in Taiwan's concrete structure design code.
When should I use Concrete Slab Design?
Concrete Slab Design fits situations like: documents & Office work in your project.
How do I install Concrete Slab Design in Claude Code?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a claude-code`. Or copy the skill folder (raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design in h30190/HJPLUS_Taiwan_Architect_KB) into .claude/skills/concrete-slab-design in your project. Claude Code loads it when a task matches its description.
How do I install Concrete Slab Design in Codex?
Run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a codex`. Or copy the skill folder (raw/建築施工與材料/混凝土結構設計/混凝土板設計/concrete-slab-design in h30190/HJPLUS_Taiwan_Architect_KB) into .agents/skills/concrete-slab-design in your project. Codex loads it when a task matches its description.
Can I use Concrete Slab Design in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add h30190/HJPLUS_Taiwan_Architect_KB --skill concrete-slab-design -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/concrete-slab-design, .gemini/skills/concrete-slab-design, .github/skills/concrete-slab-design and .opencode/skills/concrete-slab-design in your project.
What does Concrete Slab Design need to run?
SKILL.md names no scripts, command-line tools or credentials: Concrete Slab Design is instructions for the agent only. Our summary lists: Python 3. Compatibility (from SKILL.md): claude-code,opencode,agent-skills.
Does Concrete Slab Design access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Concrete Slab Design safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Concrete Slab Design use?
Concrete Slab Design is published under the CC-BY-SA-4.0 licence (declared in SKILL.md). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Concrete Slab Design use?
About 1.6k tokens (SKILL.md is roughly 6.6k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Concrete Slab Design?
Skills that share tags, products or a category with Concrete Slab Design: Fern Components (ai-dynamo/dynamo, 8.3k stars), Fireworks Open Eli5 (yizhiyanhua-ai/fireworks-open-eli5, 188 stars), Human Review (petergyang/human-review, 1.4k stars) and Frontend Textbooks (onepixelaway/frontend-textbooks, 107 stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Concrete Slab Design?
h30190 (a GitHub user) maintains it in h30190/HJPLUS_Taiwan_Architect_KB, which has 158 GitHub stars. The repository holds 86 skills in this directory. The repository was last updated on October 8, 2026.
Source: h30190/HJPLUS_Taiwan_Architect_KB on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.