Commerce B2b Open Code Components Replace

Replacing OOTB B2B Commerce Components with Open Code

This skill replaces OOTB (out-of-the-box) B2B Commerce component definitions in site metadata content.json files with their open source site: equivalents, or looks up the equivalent open code component for given OOTB definitions without making changes. It uses an authoritative mapping loaded from assets/ootb-to-open-code-mapping.json.

Scope

Modes: Full replace runs the scan (Step 1), user selection if needed, then content.json updates (Step 2–3). Lookup only (user asks for equivalents but not to change files): apply the mapping-authority rule and report OOTB → site: for the named components or for definitions found in the scoped content.json — do not call Write unless the user confirms replacement. View-scoped work: limit file discovery and reads to sfdc_cms__view/<ViewName>/ (or the path the user gives) instead of all views.

Prerequisites

Resolve <package-dir>

Read sfdx-project.json and pick the active package directory. Extract packageDirectories[] and use the entry with "default": true; if no entry is flagged default, use the first entry. Use this value as <package-dir> everywhere below. If sfdx-project.json is missing or has no packageDirectories, tell the user and abort.

Delegate setup

Before replacing components, delegate to the commerce-b2b-open-code-components-integrate skill to ensure:

1. Open source repository is cloned at .tmp/b2b-commerce-open-source-components
2. Store is selected and site metadata is retrieved locally
3. Open code components are copied to the store's site metadata

The integrating skill owns the .tmp/ clone lifecycle (it prompts the user to reuse or re-clone an existing checkout); this skill assumes the clone is already present.

Send a plain-text chat reply to the user (per Rule 1): "Before replacing components, I need to verify that the open code components are set up in your store. Let me check..."

If any prerequisite is not met, the integrating skill will handle it. Once all checks pass, proceed to the replacement workflow.

Required state after prerequisites:

• Package dir — the value resolved above (e.g., force-app)
• Store name — e.g., My_B2B_Store1
• Site metadata path — <package-dir>/main/default/digitalExperiences/site/<store-name>/

Replacement Workflow

Step 1: Scan Site and Cross-Reference Mapping

This step is MANDATORY. Always scan the site first before attempting any replacements.

Send a plain-text chat reply to the user (per Rule 1): "I'm scanning your store's site metadata to find all OOTB commerce components currently in use and checking which have open code equivalents."

Step 1a — Find affected files (one command, simple literal match):

grep -rl '"commerce' \
  <package-dir>/main/default/digitalExperiences/site/<store-name>/sfdc_cms__view/ \
  <package-dir>/main/default/digitalExperiences/site/<store-name>/sfdc_cms__themeLayout/ \
  --include="content.json"

Step 1b — Read the mapping and parse the matched files. Read assets/ootb-to-open-code-mapping.json once into memory. Then, using the Read tool, parse each matched file and extract all "definition" values that start with commerce (e.g., commerce_builder:cartBadge). Collect a deduplicated list of OOTB components across all files.

Step 1c — List repo components (one command):

ls .tmp/b2b-commerce-open-source-components/force-app/main/default/sfdc_cms__lwc/

Using the parsed definitions, the ls output, and the mapping table, categorize every discovered OOTB component into three groups:

Show the user a breakdown and a selectable list:

First, inform the user about skipped and unmapped components:

Found X OOTB components in your site:

In mapping table but NOT in repo (skipping):
  - commerce_builder:quoteSummary → site:quoteSummary (not found in repo)

No mapping available (not in mapping table):
  - commerce_builder:actionButtons
  - commerce_builder:layoutHeaderOne
  - commerce_builder:searchInputContainer
  - commerce_builder:myAccountMegaMenu

Then present the replaceable components as a multi-select list so the user can pick from checkboxes instead of typing. Include an "All of the above" option:

Which components would you like to replace?

[ ] commerce_builder:heading → site:productHeading
[ ] commerce_builder:cartBadge → site:cartBadge
[ ] commerce_builder:searchInput → site:searchInput
[ ] All of the above

If user provided specific component name(s) in the original request, pre-filter to those and skip the selection prompt.

Step 2: Replace in content.json

Send a plain-text chat reply to the user (per Rule 1): "I'm now replacing the selected OOTB component definitions with their open code equivalents in your site's content.json files."

The affected files are already known from Step 1. For each file that contains selected components:

1. Use the Read tool to read the file
2. For each selected OOTB component, confirm again that the mapped site: target exists in the open code repo. Only proceed with replacements that pass this check.
3. Replace all matching "definition" values with their mapped open code equivalents — always use the exact site:<name> string from the mapping table
   • Example: "definition": "commerce_builder:heading" → "definition": "site:productHeading"
4. Use the Write tool to save the updated file
5. Preserve all other JSON properties — only "definition" values change

Batch efficiently: if a file contains multiple OOTB components, apply ALL replacements in a single Read → modify → Write pass. Do NOT read and write the same file multiple times.

Step 3: Report

Replacement Complete!

Replaced X components across Y files:
- commerce_builder:heading → site:productHeading (3 files)
- commerce_builder:cartBadge → site:cartBadge (2 files)
- commerce_builder:searchInput → site:searchInput (4 files)

Skipped (not in repo):
- commerce_builder:quoteSummary

No mapping available (left unchanged):
- commerce_builder:actionButtons
- commerce_builder:layoutHeaderOne
- commerce_builder:searchInputContainer

Modified files:
- sfdc_cms__view/Home/content.json
- sfdc_cms__view/Product_Detail/content.json
- sfdc_cms__themeLayout/DefaultTheme/content.json

Next Steps:
1. Deploy: sf project deploy start -d <package-dir>/main/default/digitalExperiences/site/<store-name>
2. Test the store thoroughly in Experience Builder
3. Publish your site when ready

Example Interaction

User: "Replace OOTB components with open code versions"

Agent: "Before replacing components, I need to verify that the open code components are set up in your store. Let me check..."

• [done] Open source repo cloned
• [done] Store metadata available for My_B2B_Store1
• [done] Open code components are integrated

Agent: "I'm scanning your store's site metadata to find all OOTB commerce components and checking which have open code equivalents."

(Runs grep -rl to find files with commerce definitions, Reads those files to extract component names, runs ls to list repo components, then cross-references with mapping table)

Found 8 OOTB components in your site:

No mapping available (not in mapping table):
  - commerce_builder:searchInputContainer
  - commerce_builder:layoutHeaderOne
  - commerce_builder:myAccountMegaMenu
  - commerce_builder:actionButtons

Agent (asks the user via a multi-select prompt):

Which components would you like to replace?

[ ] commerce_builder:heading → site:productHeading
[ ] commerce_builder:cartBadge → site:cartBadge
[ ] commerce_builder:searchInput → site:searchInput
[ ] commerce_builder:cartSummary → site:cartSummary
[ ] All of the above

User: (selects heading and cartBadge)

Agent: "I'm now replacing the selected OOTB component definitions with their open code equivalents in your site's content.json files."

(Files already known from scan — one Read/Write pass per affected file, all replacements batched)

Replacement Complete!

Replaced 2 components across 5 files:
- commerce_builder:heading → site:productHeading (3 files)
- commerce_builder:cartBadge → site:cartBadge (2 files)

No mapping available (left unchanged):
- commerce_builder:searchInputContainer
- commerce_builder:layoutHeaderOne
- commerce_builder:myAccountMegaMenu
- commerce_builder:actionButtons

Modified files:
- sfdc_cms__view/Home/content.json
- sfdc_cms__view/Product_Detail/content.json
- sfdc_cms__themeLayout/DefaultTheme/content.json

Next Steps:
1. Deploy: sf project deploy start -d force-app/main/default/digitalExperiences/site/My_B2B_Store1
2. Test the store thoroughly in Experience Builder