Finishing a Development Branch
obra/superpowers
Walks the last step of a branch: confirm tests pass, detect the git environment, ask how to integrate, carry out your choice and clean up the worktree.
Use ONLY when the user explicitly asks to create/use a worktree, isolated worktree, parallel feature branch, or avoid branch collision; immediately create an isolated OpenCode worktree for that task.
Install Treetopia
$ npx skills add fmflurry/settings-opencode --skill treetopia -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install fmflurry/settings-opencode treetopia --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/fmflurry/settings-opencode.git skills-src && mkdir -p .claude/skills && cp -r skills-src/skills/treetopia .claude/skills/treetopia && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "treetopia" agent skill from https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopia into .claude/skills/treetopia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "treetopia", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopiaType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add fmflurry/settings-opencode --skill treetopia -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install fmflurry/settings-opencode treetopia --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/fmflurry/settings-opencode.git skills-src && mkdir -p .agents/skills && cp -r skills-src/skills/treetopia .agents/skills/treetopia && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "treetopia" agent skill from https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopia into .agents/skills/treetopia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "treetopia", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add fmflurry/settings-opencode --skill treetopia -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install fmflurry/settings-opencode treetopia --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/fmflurry/settings-opencode.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/skills/treetopia .cursor/skills/treetopia && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "treetopia" agent skill from https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopia into .cursor/skills/treetopia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "treetopia", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/fmflurry/settings-opencode.git --path skills/treetopia--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add fmflurry/settings-opencode --skill treetopia -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install fmflurry/settings-opencode treetopia --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/fmflurry/settings-opencode.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/skills/treetopia .gemini/skills/treetopia && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "treetopia" agent skill from https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopia into .gemini/skills/treetopia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "treetopia", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install fmflurry/settings-opencode treetopiaInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add fmflurry/settings-opencode --skill treetopia -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/fmflurry/settings-opencode.git skills-src && mkdir -p .github/skills && cp -r skills-src/skills/treetopia .github/skills/treetopia && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "treetopia" agent skill from https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopia into .github/skills/treetopia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "treetopia", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add fmflurry/settings-opencode --skill treetopia -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install fmflurry/settings-opencode treetopia --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/fmflurry/settings-opencode.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/skills/treetopia .opencode/skills/treetopia && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "treetopia" agent skill from https://github.com/fmflurry/settings-opencode/tree/master/skills/treetopia into .opencode/skills/treetopia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "treetopia", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
treetopia- GitHub stars
- 171
- Token cost
- ~1.1k tokens
- SKILL.md length
- 534 words
- Files
- 1
- Skills in repo
- 20
- Repo updated
- First seen
- Licence
- MIT
At a glance
Use ONLY when the user explicitly asks to create/use a worktree, isolated worktree, parallel feature branch, or avoid branch collision; immediately create an isolated OpenCode worktree for that task.
- Works in 4 steps: Derive a concise branch name from the… → Determine the base branch. → Immediately call worktree_create. → …
- Explicitly asks to create/use a worktree
- SKILL.md covers Trigger Rules, Purpose, Start Workflow and Development Guidance Inside…, plus 4 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Treetopia is an agent skill from fmflurry/settings-opencode. Use ONLY when the user explicitly asks to create/use a worktree, isolated worktree, parallel feature branch, or avoid branch collision; immediately create an isolated OpenCode worktree for that task. Do not trigger for ordinary feature work.
Its SKILL.md is about 1.1k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
It sits in Development, covering Git worktrees. The repository describes itself as: Custom OpenCode settings. The licence is MIT.
When your agent uses it
- Explicitly asks to create/use a worktree
- Isolated worktree
- Parallel feature branch
- Avoid branch collision
Example prompts
- “/treetopia”
Workflow steps
4 steps, taken from the first numbered list in SKILL.md.
- Derive a concise branch name from the user's task.
- Determine the base branch.
- Immediately call worktree_create.
- Continue development inside the new worktree/session created by the tool.
What it can do on your machine
Read from SKILL.md and the folder at commit 0e6c33c. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Treetopia loads about 1.1k tokens when it runs. Until then it costs about 63 tokens; SKILL.md has 534 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from fmflurry/settings-opencode at commit 0e6c33c, republished under its MIT licence (© fmflurry). 534 words, ~1,118 tokens.
Download SKILL.mdSave it as
.claude/skills/treetopia/SKILL.md (or your agent's skills folder).- name
- treetopia
- description
- Use ONLY when the user explicitly asks to create/use a worktree, isolated worktree, parallel feature branch, or avoid branch collision; immediately create an isolated OpenCode worktree for that task. Do not trigger for ordinary feature work.
Treetopia
Create an isolated OpenCode worktree whenever the user explicitly wants branch isolation, parallel feature work, or protection from branch collisions.
Trigger Rules
Use this skill only when the user explicitly says one of these intents:
- Create a worktree.
- Use a worktree.
- Use an isolated worktree.
- Create a parallel feature branch.
- Avoid branch collision.
- Keep two agents or two features from sharing one branch.
Do not use this skill merely because the user asks for normal implementation, refactor, testing, or feature work. Ordinary feature work stays in the current checkout unless the user explicitly requests isolation.
Purpose
Prevent two primary agents or two active features from sharing the same branch and overwriting or colliding with each other's changes.
Start Workflow
When triggered:
- Derive a concise branch name from the user's task.
- Use lowercase words separated by hyphens.
- Prefer a short prefix such as
feature/,fix/, orchore/when obvious. - Keep the name specific enough to identify the task.
- Determine the base branch.
- If the user names a base branch, use that branch.
- Otherwise, default to the current branch.
- Immediately call
worktree_create.- Pass the derived branch name.
- Pass the base branch only when the user named one or the tool requires it.
- Continue development inside the new worktree/session created by the tool.
Example tool intent:
worktree_create(branch: "feature/customer-import", baseBranch: "main")If no base branch was named:
worktree_create(branch: "fix/login-timeout")Development Guidance Inside Worktree
- Treat the worktree as the isolated task workspace.
- Follow normal project instructions, architecture rules, and verification gates.
- Do not assume the original checkout has your worktree changes.
- Avoid cross-worktree edits unless the user explicitly asks.
- Preserve the verification gate before proposing teardown, merge, or cleanup.
Tool-Use Guidance
- Use
worktree_createfor worktree creation. - Use
git-specialistfor git-only operations when available, including merge, branch creation, branch deletion, status checks, and cleanup. - Ask before any destructive or shared-state action, including branch deletion, worktree deletion, force push, merge into shared branches, or overwriting files.
- Do not auto-delete a worktree.
- Do not auto-merge a branch.
- Do not bypass hooks or verification.
Show full SKILL.md (200 more words)Show less
Teardown Workflow
When development in the worktree is finished:
- Run required verification first.
- Build/typecheck/lint as appropriate for the project.
- Run tests when behavior changed.
- Fix failures caused by the worktree changes before offering teardown.
- Offer a cleanup/merge path.
- Merge back into the original branch, or
- Merge into another user-named target branch.
- If the user names a target branch that does not exist, offer to create it.
- Ask for explicit confirmation before performing merge, branch creation, branch deletion, or worktree deletion.
- After confirmation, use
git-specialistfor git-only operations when available. - After merge or cleanup, report what changed and what remains.
Suggested teardown prompt:
Worktree verification passed. Merge/cleanup options:
1. Merge this branch back into the original branch.
2. Merge into another target branch. If it does not exist, I can create it first.
3. Keep worktree and branch for later.
Which path should I take?Safety Rules
- Never delete the worktree without explicit user confirmation.
- Never merge without explicit user confirmation.
- Never create a named target branch without explicit user confirmation.
- Never force-push unless the user explicitly asks in the same turn.
- Never skip verification before teardown unless the user explicitly waives it.
- If a merge conflict occurs, stop and report the conflict status before resolving unless the user already authorized conflict resolution.
Activation Note
After this skill is installed and OpenCode is restarted, it becomes active. Running OpenCode sessions keep using the skills loaded at startup.
© fmflurry, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in skills/treetopia of fmflurry/settings-opencode.
Open the folder on GitHubat commit 0e6c33c
Compare with similar skills
Treetopia next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Treetopia this skillfmflurry/settings-opencode | 171 | — | ~1.1k | Automated safety check: Pass | MIT | |
| Finishing a Development Branchobra/superpowers | 296k | 5 repos | ~1.9k | Automated safety check: Pass | MIT | |
| Migrate Core Code to Submodulestinyhumansai/openhuman | 42k | — | ~2.6k | Automated safety check: Pass | GPL-3.0 | |
| Finishing A Development Branchfarm-fe/farm | 5.6k | 34 repos | ~1.8k | Automated safety check: Pass | MIT | |
| Git Worktree Cleanuplobehub/lobehub | 83k | — | ~2.8k | Automated safety check: Pass | Custom licence | |
| Keep Codex Fastvibeforge1111/keep-codex-fast | 1.6k | — | ~3.1k | Automated safety check: Pass | MIT |
Similar skills
Migrate Core Code to Submodules
tinyhumansai/openhuman
Plans and carries out moving non-host-specific code and its tests from the OpenHuman core into vendored tiny submodule libraries, then releases the submodule and re-pins the host.
Finishing A Development Branch
farm-fe/farm
A skill your agent uses when implementation is complete, all tests pass, and you need to decide how to integrate the work - guides completion of development work by presenting structured options for…
Git Worktree Cleanup
lobehub/lobehub
Audits stale Git worktrees and branches with a bundled script, classifies each one, and deletes only after you approve the exact candidates.
Keep Codex Fast
vibeforge1111/keep-codex-fast
A skill your agent uses when Codex feels slow or bloated, when local sessions/logs/worktrees/config have grown over time, or when a user wants safe maintenance for Codex Desktop/CLI state.
Pre-Release PR Triage
jamiepine/voicebox
Sorts a backlog of open pull requests into must-merge, candidate, superseded and deferred, writes a triage doc and works the merge loop before a release.
More from fmflurry/settings-opencode
All 20 skills in this repoShow Your Work
fmflurry/settings-opencode
Keep a reviewable decision trail for long-running or unattended work: a TSV log with one row per decision (what, why, evidence, result).
Playwright E2E Authoring
fmflurry/settings-opencode
Scaffold and extend Playwright E2E tests for the gc.platform suite (tests/playwright), wiring every artifact to the real frontend (localhost:4200) + real .NET backend — never mocks.
Why
fmflurry/settings-opencode
A skill your agent uses for 'why does X work this way', 'why we picked Y', design rationale, regressions, postmortems, or data-backed thresholds.
Angular Accessibility
fmflurry/settings-opencode
Audit and fix common accessibility issues in Angular templates and Angular Material components.
Angular Clean Architecture
fmflurry/settings-opencode
Scaffolds and extends Angular standalone feature MODULES under src/app/modules/{name} using Clean Architecture layering (presentation/application/core/infrastructure), a self-registering module…
Angular Cop
fmflurry/settings-opencode
Pre-merge code review for Angular + TypeScript pull requests.
Related
Categories
Questions about Treetopia
What does Treetopia do?
Use ONLY when the user explicitly asks to create/use a worktree, isolated worktree, parallel feature branch, or avoid branch collision; immediately create an isolated OpenCode worktree for that task. Treetopia is an agent skill from fmflurry/settings-opencode. Use ONLY when the user explicitly asks to create/use a worktree, isolated worktree, parallel feature branch, or avoid branch collision; immediately create an isolated OpenCode worktree for that task.
When should I use Treetopia?
Treetopia fits situations like: explicitly asks to create/use a worktree; isolated worktree; parallel feature branch; avoid branch collision.
How do I install Treetopia in Claude Code?
Run `npx skills add fmflurry/settings-opencode --skill treetopia -a claude-code`. Or copy the skill folder (skills/treetopia in fmflurry/settings-opencode) into .claude/skills/treetopia in your project. Claude Code loads it when a task matches its description.
How do I install Treetopia in Codex?
Run `npx skills add fmflurry/settings-opencode --skill treetopia -a codex`. Or copy the skill folder (skills/treetopia in fmflurry/settings-opencode) into .agents/skills/treetopia in your project. Codex loads it when a task matches its description.
Can I use Treetopia in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add fmflurry/settings-opencode --skill treetopia -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/treetopia, .gemini/skills/treetopia, .github/skills/treetopia and .opencode/skills/treetopia in your project.
What does Treetopia need to run?
SKILL.md names no scripts, command-line tools or credentials: Treetopia is instructions for the agent only.
Does Treetopia access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Treetopia safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Treetopia use?
Treetopia is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Treetopia use?
About 1.1k tokens (SKILL.md is roughly 4.5k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Treetopia?
Skills that share tags, products or a category with Treetopia: Finishing a Development Branch (obra/superpowers, 296k stars), Migrate Core Code to Submodules (tinyhumansai/openhuman, 42k stars), Finishing A Development Branch (farm-fe/farm, 5.6k stars) and Git Worktree Cleanup (lobehub/lobehub, 83k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Treetopia?
fmflurry (a GitHub user) maintains it in fmflurry/settings-opencode, which has 171 GitHub stars. The repository holds 20 skills in this directory. The repository was last updated on October 7, 2026.
Source: fmflurry/settings-opencode on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.