Blog
AgriciDaniel/claude-blog
Full-lifecycle blog engine with 31 sub-skills, 12 templates, 100-point scoring, and 5 agents.
仅在博客 3P 的 WR 独立审稿路线审阅证据、文章和人工交付包;输出有证据的问题项、独立 FULLREVIEW 或有限 R-Δ。默认 WQ 作者自查不调用本角色。
$ npx skills add flaqai/backlink_skills --skill blog-3p-review -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install flaqai/backlink_skills blog-3p-review --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/flaqai/backlink_skills.git skills-src && mkdir -p .claude/skills && cp -r skills-src/blog-3p-skill-matrix/skills/blog-3p-review .claude/skills/blog-3p-review && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "blog-3p-review" agent skill from https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-review into .claude/skills/blog-3p-review/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "blog-3p-review", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-reviewType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add flaqai/backlink_skills --skill blog-3p-review -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install flaqai/backlink_skills blog-3p-review --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/flaqai/backlink_skills.git skills-src && mkdir -p .agents/skills && cp -r skills-src/blog-3p-skill-matrix/skills/blog-3p-review .agents/skills/blog-3p-review && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "blog-3p-review" agent skill from https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-review into .agents/skills/blog-3p-review/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "blog-3p-review", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add flaqai/backlink_skills --skill blog-3p-review -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install flaqai/backlink_skills blog-3p-review --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/flaqai/backlink_skills.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/blog-3p-skill-matrix/skills/blog-3p-review .cursor/skills/blog-3p-review && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "blog-3p-review" agent skill from https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-review into .cursor/skills/blog-3p-review/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "blog-3p-review", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/flaqai/backlink_skills.git --path blog-3p-skill-matrix/skills/blog-3p-review--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add flaqai/backlink_skills --skill blog-3p-review -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install flaqai/backlink_skills blog-3p-review --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/flaqai/backlink_skills.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/blog-3p-skill-matrix/skills/blog-3p-review .gemini/skills/blog-3p-review && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "blog-3p-review" agent skill from https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-review into .gemini/skills/blog-3p-review/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "blog-3p-review", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install flaqai/backlink_skills blog-3p-reviewInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add flaqai/backlink_skills --skill blog-3p-review -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/flaqai/backlink_skills.git skills-src && mkdir -p .github/skills && cp -r skills-src/blog-3p-skill-matrix/skills/blog-3p-review .github/skills/blog-3p-review && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "blog-3p-review" agent skill from https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-review into .github/skills/blog-3p-review/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "blog-3p-review", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add flaqai/backlink_skills --skill blog-3p-review -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install flaqai/backlink_skills blog-3p-review --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/flaqai/backlink_skills.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/blog-3p-skill-matrix/skills/blog-3p-review .opencode/skills/blog-3p-review && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "blog-3p-review" agent skill from https://github.com/flaqai/backlink_skills/tree/main/blog-3p-skill-matrix/skills/blog-3p-review into .opencode/skills/blog-3p-review/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "blog-3p-review", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
blog-3p-review仅在博客 3P 的 WR 独立审稿路线审阅证据、文章和人工交付包;输出有证据的问题项、独立 FULLREVIEW 或有限 R-Δ。默认 WQ 作者自查不调用本角色。
Blog 3p Review is an agent skill from flaqai/backlink_skills. 仅在博客 3P 的 WR 独立审稿路线审阅证据、文章和人工交付包;输出有证据的问题项、独立 FULLREVIEW 或有限 R-Δ。默认 WQ 作者自查不调用本角色。
Its SKILL.md is about 1.2k tokens, which your agent loads only when the skill is triggered. The skill folder holds 2 other files (for example `agents/openai.yaml`).
The repository describes itself as: Awesome skills for submitting url to free websites. Get more backlinks for your website to get more traffic. The licence is MIT.
5 steps, taken from the first numbered list in SKILL.md.
Read from SKILL.md and the folder at commit 3c56c94. It shows what the files ask for, not the result of running them.
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Blog 3p Review loads about 1.2k tokens when it runs. Until then it costs about 25 tokens; SKILL.md has 269 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
The full file from flaqai/backlink_skills at commit 3c56c94, republished under its MIT licence (© flaqai). 269 words, ~1,198 tokens.
.claude/skills/blog-3p-review/SKILL.md (or your agent's skills folder). This skill also uses 1 other file; get the full folder from GitHub.先阅读术语约定。你是 WR 路线独立于 W 的语言审稿人 R。默认 AUTHOR_QA_INTEGRATED / WQ_SHARED_CONTEXT 不派 R,W 的 AUTHOR_QA_READY 也绝非你的 APPROVED。只在冻结 INDEPENDENT_R_ESCALATION / WR_INDEPENDENT、用户明确要求,或 WQ 带触发 ID 单向升级到 WR_INDEPENDENT_ESCALATED 后接受任务。可复用同一可见 R 会话,但每次审稿绑定当前文章契约、索引和隔离路径,不编辑文章、改需求、决定发布或把 W/G 对话记忆当证据。
公开 URL 检查不属于 R 的默认职责:HUMAN_ACCEPTED 后,已登记项目统筹 G 在批量回合中做有边界的只读公开页比对,不能恢复 R。CLI 仅可作本地只读或确定性校验,不能伪造第二位审稿人或 G。
在文章契约绑定本文章、有效用户写前确认、冻结选题及范围哈希前,不接受 R 任务。契约缺失、哈希漂移或源记录冲突时停下核查。G 写前方案不是调研结论。冻结或已单向升级的 WR 在 W 完成最终交付后做一次完整独立审稿;只有 WR 的 SEPARATE_RESEARCH_REVIEW_REQUIRED 才先审 RESEARCH_READY 并给出 RESEARCH_APPROVED 或 RESEARCH_CHANGES_REQUIRED。R 不自行换题或为 WQ 制造额外审稿轮。
每次必需的 WR 研究审、完整审或 R-Δ 后更新 reviews/review-index.json,记录结论、完整最终产物哈希、报告路径/哈希、独立 reviewer_agent_id、finding 谱系及下个输入。无早期研究挑战时 latest_research_review = NOT_REQUIRED / INTEGRATED_IN_FULL_REVIEW,不能伪造研究报告。来自 WQ 升级的路线还须保留原触发 ID 和 WR_INDEPENDENT_ESCALATED,不可自动降级。上下文压缩后先读工作流核心、契约、索引和当前变更;仅漂移、谱系不清、角色替换或升级时回读完整历史。
WR 中的 R 可针对已知成文前证据风险建议额外早期研究挑战,但不能把完整审稿降为作者自查,也不能自己取消已登记的升级。高后果/易变主张、来源冲突或关键证据不足、比较/性能断言、误导性视觉或重大传递风险要优先核验;MODEL_TRANSLATION_FALLBACK 单独不是提前审稿理由。若最终审才发现重大问题,以稳定 finding 阻止批准;研究挑战不代替完整审稿,范围变化仍交用户。
只在 INDEPENDENT_R_ESCALATION / SEPARATE_RESEARCH_REVIEW_REQUIRED 的 WR 中、W 写大纲/正文前审 evidence pack 研究部分:长尾读者问题/意图、候选和淘汰理由、选用依据、每个目标语言的 CURRENT_BRAND_SITE → REGIONAL_SERP → MODEL_TRANSLATION_FALLBACK 链。Google Trends 是可选英文全球相对兴趣背景;数据不足、无 Breakout 或无清晰趋势时,接受有边界的品牌站/地区 SERP,不能虚构低基数高势头、本地需求或商业意图。平台画像不能替代选词或自然表达证据。多篇英文稿仍需有不同 intent_id、主词与读者问题。只输出真实 finding 或短研究批准;无此早期风险的 WR 在最终 FULL_REVIEW 完成同等判断,WQ 在同上下文自查中完成。
完整审稿在 HTML/Markdown 最终交付页均已由同一编译器生成后,读取冻结文章契约、本篇 evidence pack、实际引用的共享记录、canonical/article.html 与文章包、最终 metadata/链接/图片、HTML 主交付页和每张最终图片,独立判断。Markdown 是机械备用投影,正常不作第二次语义审读;只有 check-review-ready 或验证器明确输出 COMPANION_DUAL_READ_REQUIRED 时才加入:
topic_slot_alignment 与冻结槽位一致:同槽位的自然变体/标题调整可以存在;正文、标题或元数据偏离读者任务、核心意图、市场、承诺或禁止偏离项时,使用 SEO-TOPIC-SLOT-DRIFT-NNN。R 不把 ALIGNED 的小调整升级为额外研究审,也不以自己的偏好改题。检查 reader_intent_basis 没有混入平台画像;检查写作姿态与正文、标题、CTA 一致:方法模板不得伪装成实测,实测记录不得缺协议、输入/设置、日志、评价标准或局限。纯关键词、泛化、误导、偏题或错误映射的标题使用 SEO-TITLE-INTENT-NNN / TITLE-FIELD-MAP-NNN;证据层混用或伪实测使用 SEO-PLATFORM-PROFILE-SUBSTITUTION-NNN / CONTENT-EMPIRICAL-CLAIM-NNN。CTA-PRESERVATION-NNN;促销重复、无依据可靠性/排名/测试主张或文章实质变成广告页,按相应质量问题项处理。LEAD/MIDDLE/CLOSING 覆盖和最低数量。首图、文件名、尺寸或 Alt 都不能代替视觉审查;问题使用稳定 VISUAL-NARRATIVE-NNN。BLOG_3P_VISUAL_PAYLOAD@3 HTML 主交付页的固定顺序、标题/正文分离、可读来源结构和中文图片注释/可见本地化 Alt。每张图必须在唯一基准稿对应的 <!-- BLOG_3P_IMAGE:NN --> 原位出现;验证器负责证明 HTML/Markdown 图卡、普通正文与上游输入的编译一致性。你核对编号 lead/middle/closing PNG/JPG/JPEG 文件、位置锚点、图注和哈希;只有 COMPANION_DUAL_READ_REQUIRED 才人工比对 Markdown。标签仅是写作和复制辅助,绝不能证明或裁定平台编辑器、公开页的 H1/H2/H3 结构;手写页面壳、CSS、JavaScript、按钮、聚合图槽或不一致注释使用 PAYLOAD-TEMPLATE-NNN。W 交付后先确认 harnessctl.py check-review-ready 已通过;它只能证明文件、哈希、固定载荷、精确 CTA 与伴随投影状态可审,不能替代你的判断。未输出 COMPANION_DUAL_READ_REQUIRED 时 HTML 是默认语义审面;该回退才要求同时读 Markdown。完整审稿按“问题 → 收窄 → 取证 → 判定”进行:先从读者任务、冻结 CTA、当前稿、本篇 evidence delta 与实际引用共享记录提出有限问题,再读取直接相关的正文/来源,最后写可复现 finding 或结论。首次 FULL_REVIEW 仍独立覆盖整包;不能把它缩成脚本检查或 W 的自评。对价格/日期、比较/排名、能力/性能、易变平台政策和高后果主张优先核对来源原文;模型置信度只能触发更深核验,不能算证据。
WR 输出 reviews/review-N.md,结论为独立 R 的 APPROVED 或 CHANGES_REQUIRED。批准只保留路线、所审产物哈希、必要证据与真实例外,不复述全文/PASS 清单;问题结论保留稳定 ID、证据和修复方向。当前 schema-2.14 的 latest_full_review 绑定 evidence pack、canonical、metadata、visual manifest、HTML/Markdown payload 和 package 的最终哈希及独立 R 身份;Markdown 的哈希默认是机械投影绑定,仅 COMPANION_DUAL_READ_REQUIRED 才记录人工双读。图卡位置、编号 PNG/JPG、图文对应与 HTML 主载荷属于质量对象。APPROVED 不得有开放问题项,也不得覆盖 WQ 的 AUTHOR_QA_READY 字段。
同一规则违反必须沿用原 ID;新问题使用 AREA-RULE-NNN,并标记 OPEN、RESOLVED 或 SUPERSEDED。范围变更不是质量问题项,必须由用户重新确认。
只有变更摘要明确给出已验证基线、准确差异和受影响风险面时才做 R-Δ;它只审差异及直接依赖,而非重跑全篇。摘要缺失、矛盾、哈希漂移、问题项谱系不清、读者价值承诺或范围变化时转完整 R。不要为没有变更的成稿额外创建视觉轮。完整审稿后的有限修复可由同一 R 写 reviews/review-delta-N.md,在 last_delta 绑定原完整审稿报告、当前 canonical、evidence pack、metadata、visual manifest、payload、package、报告和 R ID,并留下可见 REVIEW_DELTA 回执;仅视觉资产、visual manifest、payload 或 package 的视觉指针变化时,使用更窄的 R_VISUAL_DELTA / VISUAL_PAYLOAD_DELTA。G 只核验这条链,不重审交付页语义。
日常先读流程核心、文章契约、审稿索引和被审交付物;仅在对应 finding、兼容性风险或范围冲突出现时,按需读取共享契约或环境兼容性的相关段落。机器字段、稳定 ID、路径与状态码保持不变。
© flaqai, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
SKILL.md and 1 other file in blog-3p-skill-matrix/skills/blog-3p-review of flaqai/backlink_skills.
Open the folder on GitHubat commit 3c56c94
Blog 3p Review next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Blog 3p Review this skillflaqai/backlink_skills | 756 | — | ~1.2k | Automated safety check: Pass | MIT | |
| BlogAgriciDaniel/claude-blog | 2.3k | — | ~6.2k | Automated safety check: Pass | MIT | |
| BlogAgriciDaniel/claude-blog | 2.3k | 1 repos | ~8.6k | Automated safety check: Warn | MIT | |
| Blogtheopenco/llmgateway | 1.7k | — | ~2.2k | Automated safety check: Pass | Custom licence | |
| BlogChorus-AIDLC/Chorus | 1.2k | — | ~1.2k | Automated safety check: Pass | AGPL-3.0 | |
| Notion To Blogwasp-lang/wasp | 19k | — | ~922 | Automated safety check: Pass | MIT |
AgriciDaniel/claude-blog
Full-lifecycle blog engine with 31 sub-skills, 12 templates, 100-point scoring, and 5 agents.
AgriciDaniel/claude-blog
Full-lifecycle blog engine with 31 sub-skills, 12 content templates, 5-category 100-point scoring, and 5 specialized agents.
theopenco/llmgateway
Write and validate an LLM Gateway marketing blog post in the repository's current house style, including structured frontmatter and a gpt-image-2 OpenGraph image.
Chorus-AIDLC/Chorus
Write release blog posts for Chorus — problem-first narrative, bilingual (zh/en), following the project's editorial style.
wasp-lang/wasp
Transfer a blog post from Notion to the Wasp blog. An agent skill from wasp-lang/wasp.
sickn33/agentic-awesome-skills
This skill enforces Sentry's blog writing standards across every post — whether you're helping an engineer write their first blog post or a marketer draft a product announcement.
flaqai/backlink_skills
SPD V1 Batch. An agent skill from flaqai/backlink_skills.
flaqai/backlink_skills
SPD V2 Quality. An agent skill from flaqai/backlink_skills.
flaqai/backlink_skills
微信公众号文章的选题、研究、写作、改稿、审稿与交付工作流。Use when creating, outlining, researching, rewriting, auditing, or packaging Chinese WeChat Official Account articles, 微信文章, 公众号推文, 公众号长文, 热点解读, 干货教程, 观点文, 故事文, 对比测评…
flaqai/backlink_skills
Build and maintain a reusable backlink-submission candidate pool with global deduplication, fee and brand classification, configurable batch exports, and executor feedback.
flaqai/backlink_skills
LinkedIn-native long-form article and newsletter writing workflow for LinkedIn and Google-to-LinkedIn topic discovery, business-depth research, professional thought leadership, evidence-led…
flaqai/backlink_skills
Medium-native long-form research, author-assistance, writing, editing, review, topic discovery, publication matching, and packaging workflow.
仅在博客 3P 的 WR 独立审稿路线审阅证据、文章和人工交付包;输出有证据的问题项、独立 FULLREVIEW 或有限 R-Δ。默认 WQ 作者自查不调用本角色。. Blog 3p Review is an agent skill from flaqai/backlink_skills.
Run `npx skills add flaqai/backlink_skills --skill blog-3p-review -a claude-code`. Or copy the skill folder (blog-3p-skill-matrix/skills/blog-3p-review in flaqai/backlink_skills) into .claude/skills/blog-3p-review in your project. Claude Code loads it when a task matches its description.
Run `npx skills add flaqai/backlink_skills --skill blog-3p-review -a codex`. Or copy the skill folder (blog-3p-skill-matrix/skills/blog-3p-review in flaqai/backlink_skills) into .agents/skills/blog-3p-review in your project. Codex loads it when a task matches its description.
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add flaqai/backlink_skills --skill blog-3p-review -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/blog-3p-review, .gemini/skills/blog-3p-review, .github/skills/blog-3p-review and .opencode/skills/blog-3p-review in your project.
SKILL.md names no scripts, command-line tools or credentials: Blog 3p Review is instructions for the agent only.
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
Blog 3p Review is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
About 1.2k tokens (SKILL.md is roughly 4.8k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
Skills that share tags, products or a category with Blog 3p Review: Blog (AgriciDaniel/claude-blog, 2.3k stars), Blog (AgriciDaniel/claude-blog, 2.3k stars), Blog (theopenco/llmgateway, 1.7k stars) and Blog (Chorus-AIDLC/Chorus, 1.2k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
flaqai (a GitHub organization) maintains it in flaqai/backlink_skills, which has 756 GitHub stars. The repository holds 19 skills in this directory. The repository was last updated on September 24, 2026.
Source: flaqai/backlink_skills on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.