Taibu Divination
hhszzzz/taibu
太卜（TaiBu）占术排盘工具集：八字、紫微斗数、六爻、梅花易数、奇门遁甲、大六壬、小六壬、 太乙、塔罗、西方占星、黄历等 15 种本地计算引擎。凡涉及算命、排盘、起卦、占卜、运势、命理、 择日、宜忌、流年大运、星盘的请求（fortune-telling, divination, birth chart, BaZi, ZiWei, tarot, qimen…
奇门遁甲排盘、解盘、择时、方位判断与理论教学技能。用户明确提到奇门遁甲、时家奇门、 奇门排盘、奇门解盘、奇门择吉、方位选择、趋吉避凶，或要求“用奇门”分析一件具体事情时， 必须使用本技能。正式排盘前先做结构化访谈，再调用脚本完成固定计算，最后再做解读与建议。
No licenceAuto-check passed
Install Qimen Dunjia
$ npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install FANzR-arch/Numerologist_skills qimen-dunjia --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/FANzR-arch/Numerologist_skills.git skills-src && mkdir -p .claude/skills && cp -r skills-src/qimen-dunjia .claude/skills/qimen-dunjia && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "qimen-dunjia" agent skill from https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjia into .claude/skills/qimen-dunjia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "qimen-dunjia", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjiaType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install FANzR-arch/Numerologist_skills qimen-dunjia --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/FANzR-arch/Numerologist_skills.git skills-src && mkdir -p .agents/skills && cp -r skills-src/qimen-dunjia .agents/skills/qimen-dunjia && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "qimen-dunjia" agent skill from https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjia into .agents/skills/qimen-dunjia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "qimen-dunjia", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install FANzR-arch/Numerologist_skills qimen-dunjia --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/FANzR-arch/Numerologist_skills.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/qimen-dunjia .cursor/skills/qimen-dunjia && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "qimen-dunjia" agent skill from https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjia into .cursor/skills/qimen-dunjia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "qimen-dunjia", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/FANzR-arch/Numerologist_skills.git --path qimen-dunjia--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install FANzR-arch/Numerologist_skills qimen-dunjia --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/FANzR-arch/Numerologist_skills.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/qimen-dunjia .gemini/skills/qimen-dunjia && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "qimen-dunjia" agent skill from https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjia into .gemini/skills/qimen-dunjia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "qimen-dunjia", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install FANzR-arch/Numerologist_skills qimen-dunjiaInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/FANzR-arch/Numerologist_skills.git skills-src && mkdir -p .github/skills && cp -r skills-src/qimen-dunjia .github/skills/qimen-dunjia && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "qimen-dunjia" agent skill from https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjia into .github/skills/qimen-dunjia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "qimen-dunjia", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install FANzR-arch/Numerologist_skills qimen-dunjia --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/FANzR-arch/Numerologist_skills.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/qimen-dunjia .opencode/skills/qimen-dunjia && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "qimen-dunjia" agent skill from https://github.com/FANzR-arch/Numerologist_skills/tree/main/qimen-dunjia into .opencode/skills/qimen-dunjia/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "qimen-dunjia", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
qimen-dunjia- GitHub stars
- 1.4k
- Used in
- 1 other repo
- Token cost
- ~1.5k tokens
- SKILL.md length
- 365 words
- Files
- 10 (incl. scripts, references)
- Skills in repo
- 3
- Repo updated
- First seen
- Licence
- None found
At a glance
奇门遁甲排盘、解盘、择时、方位判断与理论教学技能。用户明确提到奇门遁甲、时家奇门、 奇门排盘、奇门解盘、奇门择吉、方位选择、趋吉避凶，或要求“用奇门”分析一件具体事情时， 必须使用本技能。正式排盘前先做结构化访谈，再调用脚本完成固定计算，最后再做解读与建议。
- Works in 3 steps: 先访谈，确认用户到底要看什么、看哪一刻、想判断什么。 → 再用脚本做固定计算，不靠心算排盘。 → 最后再用奇门规则做解读、建议和风险提醒。
- SKILL.md covers 触发范围, 总原则, 默认规则 and 工作流, plus 4 more sections
- Runs Python scripts from its folder; calls pip and python
What it does
Qimen Dunjia is an agent skill from FANzR-arch/Numerologist_skills. 奇门遁甲排盘、解盘、择时、方位判断与理论教学技能。用户明确提到奇门遁甲、时家奇门、 奇门排盘、奇门解盘、奇门择吉、方位选择、趋吉避凶，或要求“用奇门”分析一件具体事情时， 必须使用本技能。正式排盘前先做结构化访谈，再调用脚本完成固定计算，最后再做解读与建议。
Its SKILL.md is about 1.5k tokens, which your agent loads only when the skill is triggered. The skill folder holds 12 other files, including scripts and reference files (for example `references/examples.md`, `references/geju.md` and `references/interview.md`). Compatibility notes: Requires Python 3.11+, lunarpython, and tzdata; run scripts/qimencli.py for all fixed calculations.
The repository describes itself as: 🔮 An engineering framework to stop LLM hallucinations in Chinese astrology. / 给“赛博半仙”戴上紧箍咒：减少幻觉、固定排盘步骤的奇门遁甲与紫微斗数 AI skills。
Example prompts
- “/qimen-dunjia”
Requirements
- Python 3
- Compatibility (from SKILL.md): Requires Python 3.11+, lunar_python, and tzdata; run scripts/qimen_cli.py for all fixed calculations.
Workflow steps
3 steps, taken from the first numbered list in SKILL.md.
- 先访谈，确认用户到底要看什么、看哪一刻、想判断什么。
- 再用脚本做固定计算，不靠心算排盘。
- 最后再用奇门规则做解读、建议和风险提醒。
What it can do on your machine
Read from SKILL.md and the folder at commit ea28c3f. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
Ships 4 files in scripts/ (Python), which the agent can run.
Shell commands in SKILL.md call:
pippython
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md. Its commands use pip, which can reach the network depending on how they are called.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Compatibility
Requires Python 3.11+, lunar_python, and tzdata; run scripts/qimen_cli.py for all fixed calculations.
From compatibility in the SKILL.md frontmatter.
Context cost
Qimen Dunjia loads about 1.5k tokens when it runs, and up to ~5.1k if it reads all its reference files. Until then it costs about 36 tokens; SKILL.md has 365 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); the scripts in this folder are not scanned.
SKILL.md
Without a licence we can't republish the file, so here is its outline and opening line. It has 365 words (~1,474 tokens).
- name
- qimen-dunjia
- compatibility
- Requires Python 3.11+, lunar_python, and tzdata; run scripts/qimen_cli.py for all fixed calculations.
Files
SKILL.md and 9 other files (scripts, references) in qimen-dunjia of FANzR-arch/Numerologist_skills.
- SKILL.md
- references/examples.md
- references/geju.md
- references/interview.md
- references/ruleset-mainline.md
- references/yongshen.md
- scripts/qimen_cli.py
- scripts/requirements.txt
- scripts/tests/__init__.py
- scripts/tests/test_qimen_cli.py
Open the folder on GitHubat commit ea28c3f
Used in 1 other repository
We found 1 copy of this SKILL.md (exact, near-identical or edited) in other folders, from 1 other GitHub owner. This page covers the copy in FANzR-arch/Numerologist_skills, which our catalogue first saw on October 7, 2026.
Similar skills
More from FANzR-arch/Numerologist_skills
Ziwei Doushu
FANzR-arch/Numerologist_skills
紫微斗数专业排盘与解盘技能。当用户提到紫微斗数、紫微排盘、紫微命盘、命宫、 十二宫、主星、四化、大限、流年、斗数格局、飞星、三方四正、紫微星、天机星、 太阳星、武曲星、天同星、廉贞星、天府星、太阴星、贪狼星、巨门星、天相星、 天梁星、七杀星、破军星等相关内容时触发此技能。也适用于用户想了解自己的命运、 性格、事业、婚姻、财运等，且明确要求或暗示使用紫微斗数体系的场景。包含完整的…
Bazi
FANzR-arch/Numerologist_skills
四柱八字专业排盘与解盘技能。当用户提到八字、四柱、天干地支、日主、十神、 大运流年、喜用神、格局、伤官配印、食神生财、五行旺衰、命局分析等相关内容时 触发此技能。也适用于用户想了解自己的命运、性格、事业、婚姻、财运等， 且明确要求或暗示使用八字体系的场景。包含完整的排盘、格局判断、十神分析、 大运流年推演等能力。
Questions about Qimen Dunjia
What does Qimen Dunjia do?
奇门遁甲排盘、解盘、择时、方位判断与理论教学技能。用户明确提到奇门遁甲、时家奇门、 奇门排盘、奇门解盘、奇门择吉、方位选择、趋吉避凶，或要求“用奇门”分析一件具体事情时， 必须使用本技能。正式排盘前先做结构化访谈，再调用脚本完成固定计算，最后再做解读与建议。. Qimen Dunjia is an agent skill from FANzR-arch/Numerologist_skills.
How do I install Qimen Dunjia in Claude Code?
Run `npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a claude-code`. Or copy the skill folder (qimen-dunjia in FANzR-arch/Numerologist_skills) into .claude/skills/qimen-dunjia in your project. Claude Code loads it when a task matches its description.
How do I install Qimen Dunjia in Codex?
Run `npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a codex`. Or copy the skill folder (qimen-dunjia in FANzR-arch/Numerologist_skills) into .agents/skills/qimen-dunjia in your project. Codex loads it when a task matches its description.
Can I use Qimen Dunjia in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add FANzR-arch/Numerologist_skills --skill qimen-dunjia -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/qimen-dunjia, .gemini/skills/qimen-dunjia, .github/skills/qimen-dunjia and .opencode/skills/qimen-dunjia in your project.
What does Qimen Dunjia need to run?
Going by SKILL.md and its folder, Qimen Dunjia needs Python for the scripts in its folder and the command-line tools its instructions call (pip and python). Our summary lists: Python 3. Compatibility (from SKILL.md): Requires Python 3.11+, lunar_python, and tzdata; run scripts/qimen_cli.py for all fixed calculations..
Does Qimen Dunjia access the network?
SKILL.md contains no URLs. Its commands use pip, which can reach the network depending on how they are called. This is read from the text; nothing was executed.
Is Qimen Dunjia safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. The check reads SKILL.md only: the scripts in the folder are not scanned, so read them before running anything.
What licence does Qimen Dunjia use?
No licence was found for Qimen Dunjia or its repository. Without one, default copyright applies: ask the author before reusing or redistributing it.
How many tokens does Qimen Dunjia use?
About 1.5k tokens (SKILL.md is roughly 5.9k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full. Its references folder adds about 3.6k tokens, read only when the agent opens those files.
What are the alternatives to Qimen Dunjia?
Skills that share tags, products or a category with Qimen Dunjia: Taibu Divination (hhszzzz/taibu, 621 stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Qimen Dunjia?
FANzR-arch (a GitHub user) maintains it in FANzR-arch/Numerologist_skills, which has 1,408 GitHub stars. The repository holds 3 skills in this directory. The repository was last updated on August 3, 2026.
Source: FANzR-arch/Numerologist_skills on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.