Spreadsheet Ops

spreadsheet-ops — the spreadsheet as a programmable surface

A spreadsheet is a runtime, not a document. Your job is to emit a checkable artifact — a .xlsx file that opens, a script that compiles, a cell range you can re-read — never a hand-waved formula in prose. Pick the tool that matches the runtime (local file vs cloud sheet, one-shot vs event-driven), write the formula with comma arguments, and verify before you claim it works.

The trap that bites everyone first: openpyxl writes formulas but does not compute them. The string is stored; Excel evaluates it on open. If you read the cell back with Python it is None until a real Excel/LibreOffice session has saved it. Internalize that before you touch a workbook.

Pick the tool first (this branches, so decide before coding)

Two you will confuse: xlsxwriter cannot open an existing file — if you need to edit one in place, that is openpyxl. And gspread vs the raw Sheets API is convenience vs throughput: reach for raw batchUpdate only when gspread's per-call writes would blow the quota.

Versions seen on PyPI when this was written (2026-06-02): openpyxl 3.1.5, gspread 6.2.1 (Python 3.8+), gspread-formatting 1.2.1, pandas on the 3.x line, Sheets API v4, Apps Script on the V8 runtime. Treat these as a floor, re-check PyPI before pinning, and pin whatever you actually resolve — do not copy a point release from a doc as gospel.

Formula rules (each rule, one reason)

1. Arguments are comma-separated, always — never semicolons. openpyxl and the file format use commas regardless of your machine's locale; a semicolon is the single most common "my written formula is broken" cause. Bad: =SUM(A1;A2) → Good: =SUM(A1,A2).
2. A formula string must start with =. ws["A1"] = "SUM(1,1)" stores literal text; ws["A1"] = "=SUM(1,1)" stores a formula. No leading = means no calculation, ever.
3. Anchor references you intend to fill. A lookup table dragged down breaks unless absolute: Bad: =VLOOKUP(A2,Sheet2!A:B,2,0) → Good: =XLOOKUP(A2,Sheet2!$A:$A,Sheet2!$B:$B).
4. Prefer XLOOKUP over VLOOKUP — exact match by default, no magic column index to miscount, works leftward. VLOOKUP's 4th arg silently defaulting to approximate match is a classic wrong-result bug.
5. Prefer dynamic arrays over Ctrl+Shift+Enter array formulas — =FILTER(...), =SORT(...), =UNIQUE(...) spill automatically and are readable. A spill blocked by data below it raises #SPILL!; clear the range, do not array-enter.
6. Never deep-nest IFs. Past two levels use LET (name sub-expressions once) or a helper column. Bad: =IF(A1>90,"A",IF(A1>80,"B",IF(A1>70,"C","D"))) → Good: a lookup table + XLOOKUP, or =LET(g,A1, IF(g>90,"A", IF(g>80,"B","C"))) kept shallow.

When generating cross-sheet formulas, SHEET() returns a sheet's index and SHEETS() returns the sheet count — both have shipped in Excel for years (SHEET/SHEETS since Excel 2013) and exist in Google Sheets, so they are safe to emit. Full XLOOKUP/SUMIFS/LET patterns and the #VALUE!/#REF!/#N/A/#NAME? error decoder live in references/formula-cookbook.md.

Python → Excel

The no-compute trap, stated as code:

from openpyxl import load_workbook
wb = load_workbook("report.xlsx")
ws = wb.active
ws["C2"] = "=A2*B2"          # stores the FORMULA string, not a number
wb.save("report.xlsx")
# Re-reading C2 now returns "=A2*B2" (the formula), or with data_only=True
# returns None — because no Excel has opened+saved the file to cache a value.
back = load_workbook("report.xlsx", data_only=True)
assert back.active["C2"].value is None   # last cached value: none yet

So: if a downstream step needs the computed number, either compute it in Python and write the value, or open the file once in Excel/LibreOffice headless to populate the cache. Do not assume openpyxl evaluated it.

Append a sheet to an existing file (the only mode that does not silently truncate):

import pandas as pd
with pd.ExcelWriter("report.xlsx", engine="openpyxl", mode="a",
                    if_sheet_exists="replace") as xl:
    df.to_excel(xl, sheet_name="2026-Q2", index=False)

Charts and conditional formatting on a new file go through xlsxwriter (richer) — it is write-only, so never point it at a file you need to keep. Recipes (chart, conditional format, write_only/ constant_memory for big files) are in references/python-excel.md.

Google Sheets from a script

import gspread
gc = gspread.service_account(filename="bot-key.json")  # service account
sh = gc.open_by_key("SPREADSHEET_ID")
ws = sh.worksheet("Orders")
ws.append_rows([["2026-06-02", "INV-1001", 240.00]],
               value_input_option="USER_ENTERED")      # parses formulas/dates

The failure that wastes the most time: a service account has zero access until the sheet is shared with its email. Open the key JSON, copy client_email, and share the sheet with it (Editor) — a PermissionError/SpreadsheetNotFound here is almost always an unshared sheet, not bad code.

Quotas (as published 2026-06-02 — re-check Google's "Usage limits" page, these shift): 300 read req/min/project, 60 read req/min/user (writes mirror this), refilled each minute, no daily cap under the per-minute ceiling. A batchUpdate — with all its sub-requests inside — counts as one request. So batch: build one batchUpdate body instead of N update calls, and wrap calls in exponential backoff on HTTP 429. Batching is the difference between a nightly job that survives and one that 429s.

Creating the OAuth client or service account itself is google-workspace's job; this skill assumes the credential exists and owns the Sheets surface. batchUpdate request shapes and backoff code are in references/sheets-api-appsscript.md.