Agent skill

Curing Temperature

Define temperature fields for composite curing simulation. An agent skill from Cai-aa/CAE-Agent-Hub.

MITAuto-check passed

Install Curing Temperature

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a claude-code

Project install by default; add -g for ~/.claude/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub curing-temperature --agent claude-code

Project scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .claude/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-temperature .claude/skills/curing-temperature && rm -rf skills-src

Use ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.

Claude Code skills documentation · loads skills from .claude/skills/

Paste into Claude Code

Install the "curing-temperature" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature into .claude/skills/curing-temperature/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-temperature", then confirm the skill loads.

Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

$skill-installer

$skill-installer install https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature

Type this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a codex

Project install goes to .agents/skills/; add -g for ~/.codex/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub curing-temperature --agent codex

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .agents/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-temperature .agents/skills/curing-temperature && rm -rf skills-src

Use ~/.agents/skills/ instead of .agents/skills for a personal install.

Codex skills documentation · loads skills from .agents/skills/

Paste into Codex

Install the "curing-temperature" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature into .agents/skills/curing-temperature/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-temperature", then confirm the skill loads.

Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a cursor

Project install goes to .agents/skills/; add -g for ~/.cursor/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub curing-temperature --agent cursor

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-temperature .cursor/skills/curing-temperature && rm -rf skills-src

Use ~/.cursor/skills/ instead of .cursor/skills for a personal install.

Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/

Paste into Cursor

Install the "curing-temperature" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature into .cursor/skills/curing-temperature/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-temperature", then confirm the skill loads.

Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

gemini skills install

$ gemini skills install https://github.com/Cai-aa/CAE-Agent-Hub.git --path Skill/abaqus/composite-curing-simulation/setup/curing-temperature

--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a gemini-cli

Project install goes to .agents/skills/; add -g for ~/.gemini/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub curing-temperature --agent gemini-cli

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-temperature .gemini/skills/curing-temperature && rm -rf skills-src

Use ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.

Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/

Paste into Gemini CLI

Install the "curing-temperature" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature into .gemini/skills/curing-temperature/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-temperature", then confirm the skill loads.

Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub curing-temperature

Installs for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a github-copilot

Project install goes to .agents/skills/; add -g for ~/.copilot/skills/.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .github/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-temperature .github/skills/curing-temperature && rm -rf skills-src

Use ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.

GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/

Paste into GitHub Copilot

Install the "curing-temperature" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature into .github/skills/curing-temperature/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-temperature", then confirm the skill loads.

GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a opencode

OpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub curing-temperature --agent opencode

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-temperature .opencode/skills/curing-temperature && rm -rf skills-src

Use ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.

OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/

Paste into OpenCode

Install the "curing-temperature" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-temperature into .opencode/skills/curing-temperature/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-temperature", then confirm the skill loads.

OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

Facts

Skill name: curing-temperature
GitHub stars: 998
Token cost: ~1.3k tokens
SKILL.md length: 624 words
Files: 1
Skills in repo: 57
Repo updated: Sep 30, 2026
First seen: Oct 7, 2026
Licence: MIT

At a glance

Define temperature fields for composite curing simulation. An agent skill from Cai-aa/CAE-Agent-Hub.

Works in 3 steps: Viscous state (high temperature,… → Rubbery state (intermediate temperature,… → Glassy state (low temperature, ~25°C):…
Needs temperature initialization
SKILL.md covers Description, Initial Conditions, Temperature in Each Step and Temperature Schedule Summary, plus 3 more sections
Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md

What it does

Curing Temperature is an agent skill from Cai-aa/CAE-Agent-Hub. Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps.

Its SKILL.md is about 1.3k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.

The licence is MIT.

When your agent uses it

Needs temperature initialization
Temperature changes
Thermal fields for curing steps

Example prompts

“/curing-temperature”

Workflow steps

3 steps, taken from the first numbered list in SKILL.md.

Viscous state (high temperature, ~150°C): Low resin viscosity, resin flow and compaction occur. The material is soft and deformable.
Rubbery state (intermediate temperature, ~180°C): Cure reaction advances, cross-linking increases. The material becomes rubbery and begins…
Glassy state (low temperature, ~25°C): Below Tg, the material is rigid and glassy. Residual stresses are locked in during this phase.

What it can do on your machine

Read from SKILL.md and the folder at commit 194ef49. It shows what the files ask for, not the result of running them.

Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.

Context cost

Curing Temperature loads about 1.3k tokens when it runs. Until then it costs about 46 tokens; SKILL.md has 624 words of instructions outside code blocks.

Always · name and description, kept in context so the agent knows when to use it: ~46
When it runs · the whole SKILL.md, loaded when a task matches: ~1.3k

Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.

Safety

Auto-check passed

The automated check found no risky patterns in SKILL.md.

Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.

SKILL.md

The full file from Cai-aa/CAE-Agent-Hub at commit 194ef49, republished under its MIT licence (© Cai-aa). 624 words, ~1,268 tokens.

Download SKILL.mdSave it as .claude/skills/curing-temperature/SKILL.md (or your agent's skills folder).

name: curing-temperature
description: Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps.

Curing Temperature Setup

Description

Define temperature fields for composite curing simulation. Invoke when user needs temperature initialization, temperature changes, or thermal fields for curing steps.

Initial Conditions

The initial temperature is set for all nodes in both instances (tool-1 and P8-1) at the start of the analysis:

*Initial Conditions, type=TEMPERATURE
_PickedSet333, 25.

_PickedSet333: Node set covering ALL nodes in both instances (tool-1 and P8-1).
Initial temperature: 25°C (room temperature).

_PickedSet333 Definition

The node set _PickedSet333 is defined using generated node ranges for both instances:

*Nset, nset=_PickedSet333, internal, instance=tool-1, generate
    1,  2691,     1
*Nset, nset=_PickedSet333, internal, instance=P8-1, generate
    1,  5445,     1    # (or 3025 for 4-ply model)

tool-1: Nodes 1 to 2691 (all tool nodes).
P8-1: Nodes 1 to 5445 (all composite nodes for 8-ply model) or 1 to 3025 (for 4-ply model).
The generate option creates a sequential node set from the start to end label with the given increment.

Temperature in Each Step

The temperature is updated in each step of the curing cycle using the *Temperature predefined field. The temperature drives the UMAT material response (curing kinetics and glass transition).

vis Step (Viscous State)

*Temperature
_PickedSet333, 150.

Temperature changes from 25°C to 150°C.
At 150°C, the resin is in a low-viscosity state, allowing flow and compaction.
The UMAT subroutine recognizes this as the viscous state.

rub Step (Rubbery State)

*Temperature
_PickedSet333, 180.

Temperature changes from 150°C to 180°C.
At 180°C, the cure reaction progresses and the material transitions to a rubbery state.
The UMAT subroutine recognizes this as the rubbery state.

glassy Step (Glassy State)

*Temperature
_PickedSet333, 25.

Temperature changes from 180°C to 25°C (cooling to room temperature).
As the material cools below its glass transition temperature (Tg), it transitions to a glassy state.
The UMAT subroutine recognizes this as the glassy state.

sp Step (Springback)

*Temperature
_PickedSet333, 25.

Temperature maintained at 25°C.
The tool is removed (via Model Change) and the composite undergoes springback at room temperature.

Temperature Schedule Summary

Step	Start Temp (°C)	End Temp (°C)	Material State
(initial)	25	25	-
vis	25	150	Viscous
rub	150	180	Rubbery
glassy	180	25	Glassy
sp	25	25	Glassy (springback)

Temperature as a Predefined Field

Temperature is a predefined field in Abaqus, applied to all nodes in the model:

The *Temperature keyword assigns a uniform temperature to all nodes in the specified set.
The temperature is ramped linearly from the previous step's value to the new value over the step time.
The UMAT subroutine receives the current temperature at each integration point and uses it to:
- Determine the material state (viscous, rubbery, or glassy).
- Compute the degree of cure (cure kinetics).
- Update the glass transition temperature (Tg).
- Calculate thermal strains and cure shrinkage strains.

Show full SKILL.md (217 more words)Show less

UMAT and Temperature Interaction

The UMAT subroutine uses temperature as the primary driver for material state transitions:

Viscous state (high temperature, ~150°C): Low resin viscosity, resin flow and compaction occur. The material is soft and deformable.
Rubbery state (intermediate temperature, ~180°C): Cure reaction advances, cross-linking increases. The material becomes rubbery and begins to develop stiffness.
Glassy state (low temperature, ~25°C): Below Tg, the material is rigid and glassy. Residual stresses are locked in during this phase.

The state variables (SDV1-SDV4) are updated based on the temperature history, tracking:

Degree of cure progression
Glass transition temperature evolution
Current material state
Accumulated cure strain

Notes

The temperature values (25, 150, 180, 25°C) represent a typical three-step curing cycle. Adjust based on the specific resin system and cure schedule.
The temperature is applied uniformly to all nodes. For spatially varying temperature fields, use a field variable or mapped temperature data.
The _PickedSet333 node set must include all nodes in both instances to ensure uniform temperature application.
When changing the mesh (e.g., from 8-ply to 4-ply), update the node range for P8-1 in _PickedSet333 accordingly (5445 for 8-ply, 3025 for 4-ply).
The temperature ramp rate is controlled by the step time. Ensure the step time is sufficient for the cure reaction to complete (especially in the rub step).

Files

Just SKILL.md in Skill/abaqus/composite-curing-simulation/setup/curing-temperature of Cai-aa/CAE-Agent-Hub.

Open the folder on GitHubat commit 194ef49

Compare with similar skills

Curing Temperature next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.

Curing Temperature compared with similar skills
Skill	Stars	Used in	Tokens	Auto-check	Licence	Repo updated
Curing Temperature this skillCai-aa/CAE-Agent-Hub	998	—	~1.3k	Automated safety check: Pass	MIT	7 days ago
Esign Field Placementaffaan-m/ECC	275k	—	~2.6k	Automated safety check: Pass	MIT	3 days ago
Composition Patternssickn33/agentic-awesome-skills	47k	1 repos	~742	Automated safety check: Pass	MIT	today
Eas Simulatorsickn33/agentic-awesome-skills	47k	1 repos	~6k	Automated safety check: Notes	MIT	today
Fieldsparcadei/Continuous-Claude-v3	3.9k	1 repos	~693	Automated safety check: Notes	MIT	8 mo ago
Vercel Composition Patternssupabase/supabase	111k	59 repos	~726	Automated safety check: Pass	MIT	today

Similar skills

Esign Field Placement
affaan-m/ECC
Deterministic method for placing signature, date, and text fields in a web e-signature composer through a browser automation session, using a fixed signature page, numeric Location panel coordinates…
275k GitHub stars~2.6k tokensUpdated 3 days ago
Productivity & AutomationAuto-check passed
Composition Patterns
sickn33/agentic-awesome-skills
A skill your agent uses when working with composition-patterns tasks or workflows
47k GitHub starsUsed in 1 repo~742 tokens
DevelopmentAuto-check passed
Eas Simulator
sickn33/agentic-awesome-skills
Curated upstream guidance for Eas Simulator; use when the workflow matches the user goal.
47k GitHub starsUsed in 1 repo~6k tokens
MobileAuto-check: notes
Fields
parcadei/Continuous-Claude-v3
Problem-solving strategies for fields in abstract algebra. An agent skill from parcadei/Continuous-Claude-v3.
3.9k GitHub starsUsed in 1 repo~693 tokens
Research & ScienceAuto-check: notes
Vercel Composition Patterns
supabase/supabase
Official
React composition patterns that scale. An agent skill from supabase/supabase.
111k GitHub starsUsed in 59 repos~726 tokens
DevelopmentAuto-check passed
Password Field Security
thedaviddias/Front-End-Checklist
A skill your agent uses when reviewing headers, forms, cookies, or third-party integrations related to Secure password input fields.
74k GitHub stars~458 tokensUpdated yesterday
Auto-check passed

More from Cai-aa/CAE-Agent-Hub

All 57 skills in this repo

Ansys Structural Workbench
Cai-aa/CAE-Agent-Hub
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and…
998 GitHub stars~2.2k tokensUpdated 7 days ago
Auto-check passed
Cylinder O Grid
Cai-aa/CAE-Agent-Hub
Plan, create, adapt, and quality-audit coin-style five-block O-grid hexahedral meshes for cylindrical CAE models.
998 GitHub stars~1.6k tokensUpdated 7 days ago
Auto-check passed
Comsol Motor Nvh Evidence
Cai-aa/CAE-Agent-Hub
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH.
998 GitHub stars~1.3k tokensUpdated 7 days ago
Auto-check passed
Aedt Evidence Electromagnetics
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Electronics Desktop and PyAEDT automation for Maxwell, HFSS, Q3D, Icepak, and related electromagnetic workflows.
998 GitHub stars~591 tokensUpdated 7 days ago
Auto-check passed
Ansys Mechanical Evidence Structural
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Mechanical structural automation through Workbench RunWB2 journals, Mechanical Scripting/ACT ExtAPI, or PyMechanical gRPC.
998 GitHub stars~554 tokensUpdated 7 days ago
Auto-check passed
Run Fluent Autoclave
Cai-aa/CAE-Agent-Hub
Run, diagnose, reproduce, and validate ANSYS Fluent CFD simulations of forced-convection autoclaves using Fluent MCP or PyFluent.
998 GitHub stars~984 tokensUpdated 7 days ago
Auto-check passed

Questions about Curing Temperature

What does Curing Temperature do?

Define temperature fields for composite curing simulation. An agent skill from Cai-aa/CAE-Agent-Hub. Curing Temperature is an agent skill from Cai-aa/CAE-Agent-Hub. Define temperature fields for composite curing simulation.

When should I use Curing Temperature?

Curing Temperature fits situations like: needs temperature initialization; temperature changes; thermal fields for curing steps.

How do I install Curing Temperature in Claude Code?

Run `npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a claude-code`. Or copy the skill folder (Skill/abaqus/composite-curing-simulation/setup/curing-temperature in Cai-aa/CAE-Agent-Hub) into .claude/skills/curing-temperature in your project. Claude Code loads it when a task matches its description.

How do I install Curing Temperature in Codex?

Run `npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a codex`. Or copy the skill folder (Skill/abaqus/composite-curing-simulation/setup/curing-temperature in Cai-aa/CAE-Agent-Hub) into .agents/skills/curing-temperature in your project. Codex loads it when a task matches its description.

Can I use Curing Temperature in Cursor, Gemini CLI or GitHub Copilot?

Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Cai-aa/CAE-Agent-Hub --skill curing-temperature -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/curing-temperature, .gemini/skills/curing-temperature, .github/skills/curing-temperature and .opencode/skills/curing-temperature in your project.

What does Curing Temperature need to run?

SKILL.md names no scripts, command-line tools or credentials: Curing Temperature is instructions for the agent only.

Does Curing Temperature access the network?

SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.

Is Curing Temperature safe to install?

Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.

What licence does Curing Temperature use?

Curing Temperature is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.

How many tokens does Curing Temperature use?

About 1.3k tokens (SKILL.md is roughly 5.1k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.

What are the alternatives to Curing Temperature?

Skills that share tags, products or a category with Curing Temperature: Esign Field Placement (affaan-m/ECC, 275k stars), Composition Patterns (sickn33/agentic-awesome-skills, 47k stars), Eas Simulator (sickn33/agentic-awesome-skills, 47k stars) and Fields (parcadei/Continuous-Claude-v3, 3.9k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.

Who maintains Curing Temperature?

Cai-aa (a GitHub user) maintains it in Cai-aa/CAE-Agent-Hub, which has 998 GitHub stars. The repository holds 57 skills in this directory. The repository was last updated on September 30, 2026.

Source: Cai-aa/CAE-Agent-Hub on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.

Install Curing Temperature

Facts

At a glance

What it does

When your agent uses it

Example prompts

Workflow steps

What it can do on your machine

Tool permissions

Runs code

Network

Credentials

Context cost

Safety

SKILL.md

Curing Temperature Setup

Description

Initial Conditions

_PickedSet333 Definition

Temperature in Each Step

vis Step (Viscous State)

rub Step (Rubbery State)

glassy Step (Glassy State)

sp Step (Springback)

Temperature Schedule Summary

Temperature as a Predefined Field

UMAT and Temperature Interaction

Notes

Files

Compare with similar skills

Similar skills

More from Cai-aa/CAE-Agent-Hub

Questions about Curing Temperature