Contact Page
thedaviddias/Front-End-Checklist
A skill your agent uses when auditing metadata, crawlability, structured data, or indexability related to Create a comprehensive Contact page.
Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding.
MITAuto-check passed
Install Curing Bc
$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub curing-bc --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .claude/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-bc .claude/skills/curing-bc && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "curing-bc" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bc into .claude/skills/curing-bc/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-bc", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bcType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub curing-bc --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .agents/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-bc .agents/skills/curing-bc && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "curing-bc" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bc into .agents/skills/curing-bc/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-bc", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub curing-bc --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-bc .cursor/skills/curing-bc && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "curing-bc" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bc into .cursor/skills/curing-bc/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-bc", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/Cai-aa/CAE-Agent-Hub.git --path Skill/abaqus/composite-curing-simulation/setup/curing-bc--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub curing-bc --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-bc .gemini/skills/curing-bc && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "curing-bc" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bc into .gemini/skills/curing-bc/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-bc", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install Cai-aa/CAE-Agent-Hub curing-bcInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .github/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-bc .github/skills/curing-bc && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "curing-bc" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bc into .github/skills/curing-bc/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-bc", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub curing-bc --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/Skill/abaqus/composite-curing-simulation/setup/curing-bc .opencode/skills/curing-bc && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "curing-bc" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/composite-curing-simulation/setup/curing-bc into .opencode/skills/curing-bc/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "curing-bc", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
curing-bc- GitHub stars
- 998
- Token cost
- ~1.4k tokens
- SKILL.md length
- 600 words
- Files
- 1
- Skills in repo
- 57
- Repo updated
- First seen
- Licence
- MIT
At a glance
Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding.
- Works in 3 steps: No friction → no asymmetric resistance… → No demolding → no physical springback… → Full rotational fixity prevents any…
- SKILL.md covers When to Invoke, Critical: Two Constraint…, TOOL Boundary Conditions… and Set-2: Springback Constraint, plus 4 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Curing Bc is an agent skill from Cai-aa/CAE-Agent-Hub. Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding. Invoke when setting up BCs, constraints, or boundary conditions for curing models with mold.
Its SKILL.md is about 1.4k tokens, which your agent loads only when the skill is triggered. It is a single SKILL.md file with no bundled scripts.
The licence is MIT.
Example prompts
- “/curing-bc”
Workflow steps
3 steps, taken from the first numbered list in SKILL.md.
- No friction → no asymmetric resistance to thermal expansion
- No demolding → no physical springback mechanism
- Full rotational fixity prevents any angle change at the constraint
What it can do on your machine
Read from SKILL.md and the folder at commit 194ef49. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves nothing: there is no allowed-tools line, so your agent's usual permission prompts apply.
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Curing Bc loads about 1.4k tokens when it runs. Until then it costs about 66 tokens; SKILL.md has 600 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from Cai-aa/CAE-Agent-Hub at commit 194ef49, republished under its MIT licence (© Cai-aa). 600 words, ~1,391 tokens.
Download SKILL.mdSave it as
.claude/skills/curing-bc/SKILL.md (or your agent's skills folder).- name
- curing-bc
- description
- Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding. Invoke when setting up BCs, constraints, or boundary conditions for curing models with mold.
Curing Boundary Conditions
This skill defines all boundary conditions for the P8_mold curing model, including the critical distinction between mold-constrained (correct) and ENCASTRE-constrained (incorrect) approaches.
When to Invoke
- User asks to set up boundary conditions for a curing model
- User mentions "约束", "边界条件", "固支", "模具约束"
- User needs to define Set-2 for springback
- User encounters constraint-related issues (e.g., symmetric deformation)
Critical: Two Constraint Paradigms
Correct: Mold Contact Constraint (P8_mold)
The mold (TOOL-1) is fixed in space, and the composite is held only by friction contact with the mold. This allows the composite to slide and expand during curing, which is the real physical mechanism.
Curing steps (vis/rub/glassy):
*Boundary
_PickedSet328, 1, 1 # TOOL U1 = 0
_PickedSet327, 2, 2 # TOOL U2 = 0Springback step (sp):
*Boundary, op=NEW
Set-2, 1, 1 # Composite inner corner U1 = 0
Set-2, 2, 2 # Composite inner corner U2 = 0
Set-2, 3, 3 # Composite inner corner U3 = 0The op=NEW keyword removes all previous boundary conditions and applies only Set-2 constraints. This is critical — without op=NEW, the mold constraints would remain active during springback.
Incorrect: ENCASTRE Constraint (P8_only)
The composite inner surface is fully fixed (all 6 DOFs) throughout the entire simulation. There is no mold, no contact, no demolding.
*Boundary
_PickedSet246, 1, 6 # ENCASTRE: U1=U2=U3=UR1=UR2=UR3=0This produces center-symmetric deformation because:
- No friction → no asymmetric resistance to thermal expansion
- No demolding → no physical springback mechanism
- Full rotational fixity prevents any angle change at the constraint
TOOL Boundary Conditions (P8_mold Only)
The TOOL part has two constraint sets:
| Set Name | DOF | Value | Purpose |
|---|---|---|---|
_PickedSet328 | U1 | 0 | Prevent mold sliding in X |
_PickedSet327 | U2 | 0 | Prevent mold sliding in Y |
Why only U1 and U2?
- The mold is a rigid body; fixing U1 and U2 prevents translation
- U3 (vertical) is constrained by the contact algorithm
- Rotations are implicitly constrained by the rigid body definition
- This allows the mold to "press down" on the composite via contact pressure
Set-2: Springback Constraint
Set-2 is a node set on the composite part at the inner corner of the L-bracket. It is activated only in the sp (springback) step.
Purpose: Prevent rigid body motion after the mold is removed. Without Set-2, the composite would float freely after demolding.
How Set-2 is defined:
- Nodes at the inner corner of the L-bracket (near origin)
- Selected by coordinate proximity: X ≈ 0 AND Y ≈ 0
- Typically 9-25 nodes (the corner mesh region)
When mesh changes: Set-2 must be redefined by matching node coordinates, not node IDs, because renumbering occurs with mesh changes.
Show full SKILL.md (230 more words)Show less
Model Change: Demolding Process
The sp step includes *Model Change to remove the TOOL elements and contact pair:
*Step, name=sp
*Model Change, remove
TOOL-1.EL # Remove all TOOL elements
*Model Change, remove
TOOL-1, com-surface # Remove contact surface
*Model Change, remove
TOOL-1, tool-surface # Remove contact surface
*Boundary, op=NEW
Set-2, 1, 3 # Apply springback constraintSequence in sp step:
- Remove TOOL elements (mold disappears)
- Remove contact surfaces (no more contact)
- Remove old boundary conditions (TOOL constraints gone)
- Apply Set-2 constraints (new BC for springback)
- Allow residual stresses to relax → springback deformation
Pressure Boundary Condition
Pressure (0.6 MPa) is applied on S2 (inner surface) during curing and removed in sp step:
** Curing steps (vis/rub/glassy):
*Dsload
P8-1.S2, P, 0.6 # 0.6 MPa on inner surface
** Springback step (sp):
** (no *Dsload — pressure removed)Why S2 (inner surface)?
- The pressure represents autoclave pressure pressing the composite against the mold
- S2 is the surface facing the mold (inner surface)
- S1 is the outer surface (contact surface with mold)
Boundary Condition Summary Table
| Step | TOOL-1 BC | Composite BC | Contact | Pressure |
|---|---|---|---|---|
| vis | U1=0, U2=0 | None (friction-held) | Active | 0.6 MPa (S2) |
| rub | U1=0, U2=0 | None (friction-held) | Active | 0.6 MPa (S2) |
| glassy | U1=0, U2=0 | None (friction-held) | Active | None |
| sp | Removed (Model Change) | Set-2: U1=U2=U3=0 (op=NEW) | Removed | None |
Common Errors
| Error | Cause | Fix |
|---|---|---|
| Center-symmetric deformation | Using ENCASTRE instead of mold contact | Use P8_mold_V2.inp template |
| Composite floats away in sp step | Missing Set-2 constraint | Add *Boundary, op=NEW with Set-2 |
| Mold still visible in sp step | Missing *Model Change, remove | Add Model Change for TOOL elements |
| Over-constraint in sp step | TOOL BCs not removed | Use op=NEW keyword to clear old BCs |
| No springback deformation | Pressure not removed in sp | Remove *Dsload in sp step |
© Cai-aa, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
Just SKILL.md in Skill/abaqus/composite-curing-simulation/setup/curing-bc of Cai-aa/CAE-Agent-Hub.
Open the folder on GitHubat commit 194ef49
Compare with similar skills
Curing Bc next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Curing Bc this skillCai-aa/CAE-Agent-Hub | 998 | — | ~1.4k | Automated safety check: Pass | MIT | |
| Contact Pagethedaviddias/Front-End-Checklist | 74k | — | ~424 | Automated safety check: Pass | MIT | |
| Psychrev Boundary Conditionsbrycewang-stanford/Awesome-Journal-Skills | 1.2k | — | ~1.1k | Automated safety check: Pass | MIT | |
| Soctheory Boundary Conditionsbrycewang-stanford/Awesome-Journal-Skills | 1.2k | — | ~1.2k | Automated safety check: Pass | MIT | |
| Composition Patternssickn33/agentic-awesome-skills | 47k | 1 repos | ~742 | Automated safety check: Pass | MIT | |
| Eas Simulatorsickn33/agentic-awesome-skills | 47k | 1 repos | ~6k | Automated safety check: Notes | MIT |
Similar skills
Psychrev Boundary Conditions
brycewang-stanford/Awesome-Journal-Skills
A skill your agent uses when setting the scope of a Psychological Review theory — what it explains, what it does NOT, and (for formal models) whether its parameters are identifiable.
Soctheory Boundary Conditions
brycewang-stanford/Awesome-Journal-Skills
A skill your agent uses when specifying the scope, domain, and limits of a Sociological Theory (ST) manuscript's theory — stating where it holds, where it does not, and what it does NOT claim.
Composition Patterns
sickn33/agentic-awesome-skills
A skill your agent uses when working with composition-patterns tasks or workflows
Eas Simulator
sickn33/agentic-awesome-skills
Curated upstream guidance for Eas Simulator; use when the workflow matches the user goal.
Unit Test Boundary Conditions
giuseppe-trisciuoglio/developer-kit
Provides edge case, corner case, boundary condition, and limit testing patterns for Java unit tests.
More from Cai-aa/CAE-Agent-Hub
All 57 skills in this repoAnsys Structural Workbench
Cai-aa/CAE-Agent-Hub
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and…
Cylinder O Grid
Cai-aa/CAE-Agent-Hub
Plan, create, adapt, and quality-audit coin-style five-block O-grid hexahedral meshes for cylindrical CAE models.
Comsol Motor Nvh Evidence
Cai-aa/CAE-Agent-Hub
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH.
Aedt Evidence Electromagnetics
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Electronics Desktop and PyAEDT automation for Maxwell, HFSS, Q3D, Icepak, and related electromagnetic workflows.
Ansys Mechanical Evidence Structural
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Mechanical structural automation through Workbench RunWB2 journals, Mechanical Scripting/ACT ExtAPI, or PyMechanical gRPC.
Run Fluent Autoclave
Cai-aa/CAE-Agent-Hub
Run, diagnose, reproduce, and validate ANSYS Fluent CFD simulations of forced-convection autoclaves using Fluent MCP or PyFluent.
Questions about Curing Bc
What does Curing Bc do?
Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding. Curing Bc is an agent skill from Cai-aa/CAE-Agent-Hub. Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding.
How do I install Curing Bc in Claude Code?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a claude-code`. Or copy the skill folder (Skill/abaqus/composite-curing-simulation/setup/curing-bc in Cai-aa/CAE-Agent-Hub) into .claude/skills/curing-bc in your project. Claude Code loads it when a task matches its description.
How do I install Curing Bc in Codex?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a codex`. Or copy the skill folder (Skill/abaqus/composite-curing-simulation/setup/curing-bc in Cai-aa/CAE-Agent-Hub) into .agents/skills/curing-bc in your project. Codex loads it when a task matches its description.
Can I use Curing Bc in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Cai-aa/CAE-Agent-Hub --skill curing-bc -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/curing-bc, .gemini/skills/curing-bc, .github/skills/curing-bc and .opencode/skills/curing-bc in your project.
What does Curing Bc need to run?
SKILL.md names no scripts, command-line tools or credentials: Curing Bc is instructions for the agent only.
Does Curing Bc access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Curing Bc safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Curing Bc use?
Curing Bc is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Curing Bc use?
About 1.4k tokens (SKILL.md is roughly 5.6k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Curing Bc?
Skills that share tags, products or a category with Curing Bc: Contact Page (thedaviddias/Front-End-Checklist, 74k stars), Psychrev Boundary Conditions (brycewang-stanford/Awesome-Journal-Skills, 1.2k stars), Soctheory Boundary Conditions (brycewang-stanford/Awesome-Journal-Skills, 1.2k stars) and Composition Patterns (sickn33/agentic-awesome-skills, 47k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Curing Bc?
Cai-aa (a GitHub user) maintains it in Cai-aa/CAE-Agent-Hub, which has 998 GitHub stars. The repository holds 57 skills in this directory. The repository was last updated on September 30, 2026.
Source: Cai-aa/CAE-Agent-Hub on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.