Semgrep
vigolium/piolium
Run Semgrep static analysis scan on a codebase using parallel subagents.
Complete workflow for static structural analysis. An agent skill from Cai-aa/CAE-Agent-Hub.
Install Abaqus Static Analysis
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-static-analysis --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .claude/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-static-analysis .claude/skills/abaqus-static-analysis && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "abaqus-static-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysis into .claude/skills/abaqus-static-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-static-analysis", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysisType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-static-analysis --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .agents/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-static-analysis .agents/skills/abaqus-static-analysis && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "abaqus-static-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysis into .agents/skills/abaqus-static-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-static-analysis", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-static-analysis --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-static-analysis .cursor/skills/abaqus-static-analysis && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "abaqus-static-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysis into .cursor/skills/abaqus-static-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-static-analysis", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/Cai-aa/CAE-Agent-Hub.git --path Skill/abaqus/analysis/abaqus-static-analysis--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-static-analysis --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-static-analysis .gemini/skills/abaqus-static-analysis && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "abaqus-static-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysis into .gemini/skills/abaqus-static-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-static-analysis", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-static-analysisInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .github/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-static-analysis .github/skills/abaqus-static-analysis && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "abaqus-static-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysis into .github/skills/abaqus-static-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-static-analysis", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-static-analysis --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-static-analysis .opencode/skills/abaqus-static-analysis && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "abaqus-static-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-static-analysis into .opencode/skills/abaqus-static-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-static-analysis", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
abaqus-static-analysis- GitHub stars
- 1k
- Token cost
- ~1.2k tokens
- SKILL.md length
- 477 words
- Files
- 4
- Skills in repo
- 57
- Repo updated
- First seen
- Licence
- MIT
At a glance
Complete workflow for static structural analysis. An agent skill from Cai-aa/CAE-Agent-Hub.
- Analyzing stress
- SKILL.md covers When to Use This Skill, Workflow Steps, What to Ask User and Key Decisions, plus 4 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
- Reaction forces under constant loads
What it does
Abaqus Static Analysis is an agent skill from Cai-aa/CAE-Agent-Hub. Complete workflow for static structural analysis. Use when analyzing stress, displacement, or reaction forces under constant loads. For strength and stiffness evaluation.
Its SKILL.md is about 1.2k tokens, which your agent loads only when the skill is triggered. The skill folder holds 3 other files (for example `UPSTREAM.md` and `metadata.json`).
It sits in Security, covering Static analysis and SAST. The licence is MIT.
When your agent uses it
- Analyzing stress
- Reaction forces under constant loads
Example prompts
- “/abaqus-static-analysis”
Requirements
- Pre-approved tools (allowed-tools): Read, Write, Edit, Glob, Grep, Bash(abaqus:*), Skill
What it can do on your machine
Read from SKILL.md and the folder at commit 194ef49. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves these tools, so the agent can use them without asking each time:
ReadWriteEditGlobGrepBash(abaqus:*)Skill
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Abaqus Static Analysis loads about 1.2k tokens when it runs. Until then it costs about 48 tokens; SKILL.md has 477 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from Cai-aa/CAE-Agent-Hub at commit 194ef49, republished under its MIT licence (© Cai-aa). 477 words, ~1,169 tokens.
Download SKILL.mdSave it as
.claude/skills/abaqus-static-analysis/SKILL.md (or your agent's skills folder). This skill also uses 3 other files; get the full folder from GitHub.- name
- abaqus-static-analysis
- description
- Complete workflow for static structural analysis. Use when analyzing stress, displacement, or reaction forces under constant loads. For strength and stiffness evaluation.
- allowed-tools
- Read, Write, Edit, Glob, Grep, Bash(abaqus:*), Skill
Abaqus Static Analysis Workflow
Complete workflow for static structural analysis - stress, displacement, and reaction forces under constant loads.
When to Use This Skill
Route here when user mentions:
- "stress analysis", "structural analysis"
- "how much will it deflect", "displacement"
- "is this strong enough", "strength check"
- "factor of safety", "safety factor"
- "reaction forces", "support loads"
- "simulate a load on this part"
Route elsewhere:
- Time-varying loads, impact, vibration →
/abaqus-dynamic-analysis - Natural frequencies, resonance →
/abaqus-modal-analysis - Temperature effects, thermal stress →
/abaqus-coupled-analysis - Heat transfer only →
/abaqus-thermal-analysis - Parts touching, friction →
/abaqus-contact-analysis
Workflow Steps
Execute these skills in order:
| Step | Skill | Purpose |
|---|---|---|
| 1 | /abaqus-geometry | Create part and assembly |
| 2 | /abaqus-material | Define material properties |
| 3 | /abaqus-mesh | Generate finite element mesh |
| 4 | /abaqus-bc | Apply supports and constraints |
| 5 | /abaqus-load | Apply forces and pressures |
| 6 | /abaqus-step | Configure analysis step (optional - default is fine) |
| 7 | /abaqus-job | Run the analysis |
| 8 | /abaqus-odb | Extract results |
What to Ask User
Required Information
| Input | What to Ask |
|---|---|
| Geometry | "What are the dimensions? (e.g., 100x50x20 mm)" |
| Material | "What material? (Steel, Aluminum, or custom E/v)" |
| Supports | "How is it supported? (fixed face, pinned points, rollers)" |
| Loads | "What loads? (force magnitude, location, direction)" |
Optional (Has Defaults)
| Input | Default | Ask If |
|---|---|---|
| Mesh size | Auto-calculated | Stress concentrations present |
| Element type | C3D8R | Complex curved geometry |
| Nonlinear | OFF | Large deformation expected |
Key Decisions
Linear vs Nonlinear Analysis
| Condition | Setting | When |
|---|---|---|
| Small deformation, linear material | nlgeom=OFF | Displacements < 1% of part size |
| Large deformation or rotation | nlgeom=ON | Thin structures, rubber, cables |
| Yielding expected | nlgeom=ON + Plasticity | Stress > yield strength |
Default: Start with linear. Switch to nonlinear if convergence issues or large deformation.
What Results to Extract
| User Goal | Output Variables | Acceptance Criteria |
|---|---|---|
| Strength assessment | S (stress), MISES | MISES < yield stress |
| Stiffness check | U (displacement) | Max deflection acceptable |
| Support sizing | RF (reaction force) | Reactions match applied loads |
Show full SKILL.md (188 more words)Show less
Validation Checkpoints
After Each Step
| Step | What to Verify |
|---|---|
| Geometry | Part has cells, no error messages |
| Material | Section assigned to all cells |
| Mesh | Node count OK (Learning Edition: <=1000) |
| BCs | At least one fixed constraint exists |
| Loads | Applied to correct surface/point |
| Job | Completes without errors in .sta file |
Results Sanity Checks
| Check | Expected |
|---|---|
| Reaction force sum | Approximately equals applied loads |
| Displacement magnitude | Physically reasonable |
| Stress pattern | Follows logical load path |
| Max stress location | At expected concentration points |
Troubleshooting
| Error | Cause | Solution |
|---|---|---|
| "Zero pivot" | Rigid body motion | Add more BCs to constrain all 6 DOFs |
| "Negative eigenvalue" | Buckling or instability | Check BCs, may need stabilization |
| "Too many increments" | Load too large | Reduce load or use more increments |
| "Equilibrium not achieved" | Convergence failure | Try smaller initial increment |
| "Memory exceeded" | Mesh too fine | Increase element size |
Feedback Loops
- Mesh fails: Return to geometry, add partitions or simplify
- Zero pivot error: Return to BCs, ensure all rigid body modes constrained
- Unreasonable results: Verify material properties, check load direction/sign
- Stress too high: Either design issue (expected) or incorrect BC/load setup
Code Patterns
For API syntax and code examples, see:
© Cai-aa, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
SKILL.md and 3 other files in Skill/abaqus/analysis/abaqus-static-analysis of Cai-aa/CAE-Agent-Hub.
- SKILL.md
- UPSTREAM.md
- UPSTREAM_LICENSE
- metadata.json
Open the folder on GitHubat commit 194ef49
Compare with similar skills
Abaqus Static Analysis next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Abaqus Static Analysis this skillCai-aa/CAE-Agent-Hub | 1k | — | ~1.2k | Automated safety check: Pass | MIT | |
| Semgrepvigolium/piolium | 140 | 1 repos | ~2.4k | Automated safety check: Notes | MIT | |
| C To AstNarwhal-Lab/MagicSkills | 316 | — | ~1.1k | Automated safety check: Pass | MIT | |
| Semgrep Security Scantrailofbits/skills | 7.5k | — | ~3.7k | Automated safety check: Notes | CC-BY-SA-4.0 | |
| LLM Sast ScannerSunWeb3Sec/llm-sast-scanner | 288 | — | ~6.2k | Automated safety check: Pass | None | |
| Sast SemgrepAgentSecOps/SecOpsAgentKit | 220 | 2 repos | ~2.4k | Automated safety check: Pass | Custom licence |
Similar skills
C To Ast
Narwhal-Lab/MagicSkills
Parse C source code into an Abstract Syntax Tree (AST). An agent skill from Narwhal-Lab/MagicSkills.
- Official
Semgrep Security Scan
trailofbits/skills
Detects languages, proposes rulesets for approval, then runs the approved Semgrep scan across a codebase and merges the output into one SARIF file.
LLM Sast Scanner
SunWeb3Sec/llm-sast-scanner
General-purpose Static Application Security Testing (SAST) skill for code vulnerability analysis.
Sast Semgrep
AgentSecOps/SecOpsAgentKit
Static application security testing (SAST) using Semgrep for vulnerability detection, security code review, and secure coding guidance with OWASP and CWE framework mapping.
Wp Phpstan
Automattic/agent-skills
A skill your agent uses when configuring, running, or fixing PHPStan static analysis in WordPress projects (plugins/themes/sites): phpstan.neon setup, baselines, WordPress-specific typing, and…
More from Cai-aa/CAE-Agent-Hub
All 57 skills in this repoAnsys Structural Workbench
Cai-aa/CAE-Agent-Hub
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and…
Cylinder O Grid
Cai-aa/CAE-Agent-Hub
Plan, create, adapt, and quality-audit coin-style five-block O-grid hexahedral meshes for cylindrical CAE models.
Comsol Motor Nvh Evidence
Cai-aa/CAE-Agent-Hub
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH.
Aedt Evidence Electromagnetics
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Electronics Desktop and PyAEDT automation for Maxwell, HFSS, Q3D, Icepak, and related electromagnetic workflows.
Ansys Mechanical Evidence Structural
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Mechanical structural automation through Workbench RunWB2 journals, Mechanical Scripting/ACT ExtAPI, or PyMechanical gRPC.
Run Fluent Autoclave
Cai-aa/CAE-Agent-Hub
Run, diagnose, reproduce, and validate ANSYS Fluent CFD simulations of forced-convection autoclaves using Fluent MCP or PyFluent.
Related
Categories
Questions about Abaqus Static Analysis
What does Abaqus Static Analysis do?
Complete workflow for static structural analysis. An agent skill from Cai-aa/CAE-Agent-Hub. Abaqus Static Analysis is an agent skill from Cai-aa/CAE-Agent-Hub. Complete workflow for static structural analysis.
When should I use Abaqus Static Analysis?
Abaqus Static Analysis fits situations like: analyzing stress; reaction forces under constant loads.
How do I install Abaqus Static Analysis in Claude Code?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a claude-code`. Or copy the skill folder (Skill/abaqus/analysis/abaqus-static-analysis in Cai-aa/CAE-Agent-Hub) into .claude/skills/abaqus-static-analysis in your project. Claude Code loads it when a task matches its description.
How do I install Abaqus Static Analysis in Codex?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a codex`. Or copy the skill folder (Skill/abaqus/analysis/abaqus-static-analysis in Cai-aa/CAE-Agent-Hub) into .agents/skills/abaqus-static-analysis in your project. Codex loads it when a task matches its description.
Can I use Abaqus Static Analysis in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-static-analysis -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/abaqus-static-analysis, .gemini/skills/abaqus-static-analysis, .github/skills/abaqus-static-analysis and .opencode/skills/abaqus-static-analysis in your project.
What does Abaqus Static Analysis need to run?
SKILL.md names no scripts, command-line tools or credentials: Abaqus Static Analysis is instructions for the agent only. Its frontmatter pre-approves these tools: Read, Write, Edit, Glob, Grep, Bash(abaqus:*), Skill.
Does Abaqus Static Analysis access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Abaqus Static Analysis safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Abaqus Static Analysis use?
Abaqus Static Analysis is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Abaqus Static Analysis use?
About 1.2k tokens (SKILL.md is roughly 4.7k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Abaqus Static Analysis?
Skills that share tags, products or a category with Abaqus Static Analysis: Semgrep (vigolium/piolium, 140 stars), C To Ast (Narwhal-Lab/MagicSkills, 316 stars), Semgrep Security Scan (trailofbits/skills, 7.5k stars) and LLM Sast Scanner (SunWeb3Sec/llm-sast-scanner, 288 stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Abaqus Static Analysis?
Cai-aa (a GitHub user) maintains it in Cai-aa/CAE-Agent-Hub, which has 1,015 GitHub stars. The repository holds 57 skills in this directory. The repository was last updated on September 30, 2026.
Source: Cai-aa/CAE-Agent-Hub on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.