Agent skill

Abaqus Field

Define initial conditions and predefined fields. An agent skill from Cai-aa/CAE-Agent-Hub.

MITAuto-check passed

Install Abaqus Field

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a claude-code

Project install by default; add -g for ~/.claude/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-field --agent claude-code

Project scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .claude/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-field .claude/skills/abaqus-field && rm -rf skills-src

Use ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.

Claude Code skills documentation · loads skills from .claude/skills/

Paste into Claude Code

Install the "abaqus-field" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field into .claude/skills/abaqus-field/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-field", then confirm the skill loads.

Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

$skill-installer

$skill-installer install https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field

Type this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a codex

Project install goes to .agents/skills/; add -g for ~/.codex/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-field --agent codex

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .agents/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-field .agents/skills/abaqus-field && rm -rf skills-src

Use ~/.agents/skills/ instead of .agents/skills for a personal install.

Codex skills documentation · loads skills from .agents/skills/

Paste into Codex

Install the "abaqus-field" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field into .agents/skills/abaqus-field/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-field", then confirm the skill loads.

Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a cursor

Project install goes to .agents/skills/; add -g for ~/.cursor/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-field --agent cursor

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-field .cursor/skills/abaqus-field && rm -rf skills-src

Use ~/.cursor/skills/ instead of .cursor/skills for a personal install.

Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/

Paste into Cursor

Install the "abaqus-field" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field into .cursor/skills/abaqus-field/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-field", then confirm the skill loads.

Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

gemini skills install

$ gemini skills install https://github.com/Cai-aa/CAE-Agent-Hub.git --path Skill/abaqus/setup/abaqus-field

--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a gemini-cli

Project install goes to .agents/skills/; add -g for ~/.gemini/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-field --agent gemini-cli

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-field .gemini/skills/abaqus-field && rm -rf skills-src

Use ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.

Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/

Paste into Gemini CLI

Install the "abaqus-field" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field into .gemini/skills/abaqus-field/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-field", then confirm the skill loads.

Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-field

Installs for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a github-copilot

Project install goes to .agents/skills/; add -g for ~/.copilot/skills/.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .github/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-field .github/skills/abaqus-field && rm -rf skills-src

Use ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.

GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/

Paste into GitHub Copilot

Install the "abaqus-field" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field into .github/skills/abaqus-field/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-field", then confirm the skill loads.

GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

skills CLI

$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a opencode

OpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.

GitHub CLI

$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-field --agent opencode

Project scope by default (.agents/skills/); add --scope user for a personal install.

Manual copy

$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/Skill/abaqus/setup/abaqus-field .opencode/skills/abaqus-field && rm -rf skills-src

Use ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.

OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/

Paste into OpenCode

Install the "abaqus-field" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/setup/abaqus-field into .opencode/skills/abaqus-field/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-field", then confirm the skill loads.

OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.

Facts

Skill name: abaqus-field
GitHub stars: 1k
Token cost: ~1k tokens
SKILL.md length: 446 words
Files: 4
Skills in repo: 57
Repo updated: Sep 30, 2026
First seen: Oct 7, 2026
Licence: MIT

At a glance

Define initial conditions and predefined fields. An agent skill from Cai-aa/CAE-Agent-Hub.

Works in 4 steps: Identify Field Type → Define Region → Set Values or Import → …
User mentions initial temperature
SKILL.md covers When to Use This Skill, Key Decisions, What to Ask User and Workflow: Setting Up Fields, plus 5 more sections
Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md

What it does

Abaqus Field is an agent skill from Cai-aa/CAE-Agent-Hub. Define initial conditions and predefined fields. Use when user mentions initial temperature, pre-stress, residual stress, or import from previous analysis.

Its SKILL.md is about 1k tokens, which your agent loads only when the skill is triggered. The skill folder holds 3 other files (for example `UPSTREAM.md` and `metadata.json`).

The licence is MIT.

When your agent uses it

User mentions initial temperature
Residual stress
Import from previous analysis

Example prompts

“/abaqus-field”

Requirements

Pre-approved tools (allowed-tools): Read, Write, Edit, Glob, Grep, Bash(abaqus:*)

Workflow steps

4 steps, taken from the step headings in SKILL.md.

Identify Field Type
Define Region
Set Values or Import
Verify Step

What it can do on your machine

Read from SKILL.md and the folder at commit 194ef49. It shows what the files ask for, not the result of running them.

Tool permissions
Pre-approves these tools, so the agent can use them without asking each time:
- Read
- Write
- Edit
- Glob
- Grep
- Bash(abaqus:*)
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.

Context cost

Abaqus Field loads about 1k tokens when it runs. Until then it costs about 42 tokens; SKILL.md has 446 words of instructions outside code blocks.

Always · name and description, kept in context so the agent knows when to use it: ~42
When it runs · the whole SKILL.md, loaded when a task matches: ~1k

Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.

Safety

Auto-check passed

The automated check found no risky patterns in SKILL.md.

Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.

SKILL.md

The full file from Cai-aa/CAE-Agent-Hub at commit 194ef49, republished under its MIT licence (© Cai-aa). 446 words, ~1,021 tokens.

Download SKILL.mdSave it as .claude/skills/abaqus-field/SKILL.md (or your agent's skills folder). This skill also uses 3 other files; get the full folder from GitHub.

name: abaqus-field
description: Define initial conditions and predefined fields. Use when user mentions initial temperature, pre-stress, residual stress, or import from previous analysis.
allowed-tools: Read, Write, Edit, Glob, Grep, Bash(abaqus:*)

Abaqus Field Skill

This skill defines initial conditions and predefined fields in Abaqus. Use it to set starting states or import results from previous analyses.

When to Use This Skill

Route here when user mentions:

"initial temperature", "starting temperature", "the part starts at..."
"pre-stress", "residual stress", "initial stress"
"initial velocity" (for impact/explicit dynamics)
"import temperature from thermal analysis"
"transfer results from previous analysis"
"bolt pre-tension", "bolt preload"

Route elsewhere:

Fixed temperature boundary conditions → /abaqus-bc
Heat flux, convection, radiation loads → /abaqus-load
Time-varying fields via amplitude → /abaqus-amplitude

Key Decisions

Field Type Selection

User Need	Field Type	Typical Use
Starting temperature	Temperature	Thermal stress from uniform T
Residual stress	Stress	Pre-stressed members
Impact velocity	Velocity	Explicit dynamics
From other analysis	Predefined Temperature	Sequential thermal-structural
Custom variable	Predefined Field	User-defined behaviors

Distribution Type

Type	When to Use
UNIFORM	Same value everywhere
FROM_FILE	Import from ODB or FIL
ANALYTICAL_FIELD	Expression-based (X, Y, Z)
USER_DEFINED	Via user subroutine

What to Ask User

If information is missing, ask:

What initial condition? Temperature, stress, velocity, or custom field?
Uniform or varying? Same value everywhere or position-dependent?
Import from ODB? If transferring, which file/step/frame?
Region? Entire model or specific region?
Value(s)? Magnitude, stress components, or velocity vector?

Workflow: Setting Up Fields

Step 1: Identify Field Type

Match user request to field type:

Temperature values → Temperature field
Stress state → Stress field
Moving parts → Velocity field
Previous analysis results → FROM_FILE distribution

Step 2: Define Region

Determine where the field applies:

Entire model (assembly set)
Specific part instance
Element set or node set

Show full SKILL.md (190 more words)Show less

Step 3: Set Values or Import

For uniform fields: specify single magnitude or component values. For imported fields: ODB path, step name, increment number.

Step 4: Verify Step

Initial conditions use createStepName='Initial'. Predefined fields in analysis steps use the step name.

Sequential Thermal-Structural Workflow

Run thermal analysis, save ODB
Import temperature as predefined field in structural model
Temperature causes thermal strain (requires expansion coefficient)

Key Parameters

Parameter	Notes
`createStepName`	'Initial' for initial conditions, step name for predefined
`distributionType`	UNIFORM, FROM_FILE, ANALYTICAL_FIELD
`fileName`	ODB path for FROM_FILE distribution
`beginStep/endStep`	Frame selection for ODB import

Validation Checklist

Correct field type for the physics
Region covers intended elements/nodes
Step name is correct (Initial vs analysis step)
For FROM_FILE: ODB exists and contains required data
For thermal stress: material has expansion coefficient

Troubleshooting

Problem	Likely Cause	Solution
Field not applied	Wrong region or step	Verify region covers elements
Cannot read from ODB	ODB locked or wrong path	Close other sessions, check path
Temperature mismatch	Mesh incompatibility	Use mapping tolerance options
Stress equilibrium error	Stress not self-equilibrating	Review stress field consistency

Code Patterns

For API syntax and code examples, see references/ folder.

Files

SKILL.md and 3 other files in Skill/abaqus/setup/abaqus-field of Cai-aa/CAE-Agent-Hub.

SKILL.md
UPSTREAM.md
UPSTREAM_LICENSE
metadata.json

Open the folder on GitHubat commit 194ef49

Compare with similar skills

Abaqus Field next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.

Abaqus Field compared with similar skills
Skill	Stars	Used in	Tokens	Auto-check	Licence	Repo updated
Abaqus Field this skillCai-aa/CAE-Agent-Hub	1k	—	~1k	Automated safety check: Pass	MIT	9 days ago
Esign Field Placementaffaan-m/ECC	276k	—	~2.6k	Automated safety check: Pass	MIT	today
Initiate SetupNousResearch/hermes-agent	252k	—	~2.3k	Automated safety check: Pass	MIT	today
Fieldsparcadei/Continuous-Claude-v3	3.9k	1 repos	~693	Automated safety check: Notes	MIT	8 mo ago
Password Field Securitythedaviddias/Front-End-Checklist	74k	—	~458	Automated safety check: Pass	MIT	3 days ago
Field Notes Editorial Templatenexu-io/open-design	100k	—	~574	Automated safety check: Pass	Apache-2.0	today

Similar skills

Esign Field Placement
affaan-m/ECC
Deterministic method for placing signature, date, and text fields in a web e-signature composer through a browser automation session, using a fixed signature page, numeric Location panel coordinates…
276k GitHub stars~2.6k tokensUpdated today
Productivity & AutomationAuto-check passed
Initiate Setup
NousResearch/hermes-agent
Run the first-run setup chat in the Hermes desktop app. An agent skill from NousResearch/hermes-agent.
252k GitHub stars~2.3k tokensUpdated today
Auto-check passed
Fields
parcadei/Continuous-Claude-v3
Problem-solving strategies for fields in abstract algebra. An agent skill from parcadei/Continuous-Claude-v3.
3.9k GitHub starsUsed in 1 repo~693 tokens
Research & ScienceAuto-check: notes
Password Field Security
thedaviddias/Front-End-Checklist
A skill your agent uses when reviewing headers, forms, cookies, or third-party integrations related to Secure password input fields.
74k GitHub stars~458 tokensUpdated 3 days ago
Auto-check passed
Field Notes Editorial Template
nexu-io/open-design
Editorial "Field Notes" report template with soft paper background, serif hero typography, rounded pastel insight cards, and a retention chart panel.
100k GitHub stars~574 tokensUpdated today
Frontend & DesignAuto-check passed
Hunt Exceptional Conditions
sickn33/agentic-awesome-skills
Hunt mishandling of exceptional conditions. An agent skill from sickn33/agentic-awesome-skills.
47k GitHub starsUsed in 1 repo~1.3k tokens
Auto-check passed

More from Cai-aa/CAE-Agent-Hub

All 57 skills in this repo

Ansys Structural Workbench
Cai-aa/CAE-Agent-Hub
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and…
1k GitHub stars~2.2k tokensUpdated 9 days ago
Auto-check passed
Cylinder O Grid
Cai-aa/CAE-Agent-Hub
Plan, create, adapt, and quality-audit coin-style five-block O-grid hexahedral meshes for cylindrical CAE models.
1k GitHub stars~1.6k tokensUpdated 9 days ago
Auto-check passed
Comsol Motor Nvh Evidence
Cai-aa/CAE-Agent-Hub
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH.
1k GitHub stars~1.3k tokensUpdated 9 days ago
Auto-check passed
Aedt Evidence Electromagnetics
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Electronics Desktop and PyAEDT automation for Maxwell, HFSS, Q3D, Icepak, and related electromagnetic workflows.
1k GitHub stars~591 tokensUpdated 9 days ago
Auto-check passed
Ansys Mechanical Evidence Structural
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Mechanical structural automation through Workbench RunWB2 journals, Mechanical Scripting/ACT ExtAPI, or PyMechanical gRPC.
1k GitHub stars~554 tokensUpdated 9 days ago
Auto-check passed
Run Fluent Autoclave
Cai-aa/CAE-Agent-Hub
Run, diagnose, reproduce, and validate ANSYS Fluent CFD simulations of forced-convection autoclaves using Fluent MCP or PyFluent.
1k GitHub stars~984 tokensUpdated 9 days ago
Auto-check passed

Questions about Abaqus Field

What does Abaqus Field do?

Define initial conditions and predefined fields. An agent skill from Cai-aa/CAE-Agent-Hub. Abaqus Field is an agent skill from Cai-aa/CAE-Agent-Hub. Define initial conditions and predefined fields.

When should I use Abaqus Field?

Abaqus Field fits situations like: user mentions initial temperature; residual stress; import from previous analysis.

How do I install Abaqus Field in Claude Code?

Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a claude-code`. Or copy the skill folder (Skill/abaqus/setup/abaqus-field in Cai-aa/CAE-Agent-Hub) into .claude/skills/abaqus-field in your project. Claude Code loads it when a task matches its description.

How do I install Abaqus Field in Codex?

Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a codex`. Or copy the skill folder (Skill/abaqus/setup/abaqus-field in Cai-aa/CAE-Agent-Hub) into .agents/skills/abaqus-field in your project. Codex loads it when a task matches its description.

Can I use Abaqus Field in Cursor, Gemini CLI or GitHub Copilot?

Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-field -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/abaqus-field, .gemini/skills/abaqus-field, .github/skills/abaqus-field and .opencode/skills/abaqus-field in your project.

What does Abaqus Field need to run?

SKILL.md names no scripts, command-line tools or credentials: Abaqus Field is instructions for the agent only. Its frontmatter pre-approves these tools: Read, Write, Edit, Glob, Grep, Bash(abaqus:*).

Does Abaqus Field access the network?

SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.

Is Abaqus Field safe to install?

Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.

What licence does Abaqus Field use?

Abaqus Field is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.

How many tokens does Abaqus Field use?

About 1k tokens (SKILL.md is roughly 4.1k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.

What are the alternatives to Abaqus Field?

Skills that share tags, products or a category with Abaqus Field: Esign Field Placement (affaan-m/ECC, 276k stars), Initiate Setup (NousResearch/hermes-agent, 252k stars), Fields (parcadei/Continuous-Claude-v3, 3.9k stars) and Password Field Security (thedaviddias/Front-End-Checklist, 74k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.

Who maintains Abaqus Field?

Cai-aa (a GitHub user) maintains it in Cai-aa/CAE-Agent-Hub, which has 1,015 GitHub stars. The repository holds 57 skills in this directory. The repository was last updated on September 30, 2026.

Source: Cai-aa/CAE-Agent-Hub on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.

Install Abaqus Field

Facts

At a glance

What it does

When your agent uses it

Example prompts

Requirements

Workflow steps

What it can do on your machine

Tool permissions

Runs code

Network

Credentials

Context cost

Safety

SKILL.md

Abaqus Field Skill

When to Use This Skill

Key Decisions

Field Type Selection

Distribution Type

What to Ask User

Workflow: Setting Up Fields

Step 1: Identify Field Type

Step 2: Define Region

Step 3: Set Values or Import

Step 4: Verify Step

Sequential Thermal-Structural Workflow

Key Parameters

Validation Checklist

Troubleshooting

Code Patterns

Files

Compare with similar skills

Similar skills

More from Cai-aa/CAE-Agent-Hub

Questions about Abaqus Field