Dynamic Workflow Mode
affaan-m/ECC
Design task-local harnesses, eval gates, and reusable skill extraction for Claude dynamic workflow mode and other adaptive agent harnesses.
Complete workflow for dynamic analysis. An agent skill from Cai-aa/CAE-Agent-Hub.
MITAuto-check passed
Install Abaqus Dynamic Analysis
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a claude-codeProject install by default; add -g for ~/.claude/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-dynamic-analysis --agent claude-codeProject scope by default; add --scope user for a personal install. Needs GitHub CLI 2.90.0 or later (public preview).
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .claude/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-dynamic-analysis .claude/skills/abaqus-dynamic-analysis && rm -rf skills-srcUse ~/.claude/skills/ instead of .claude/skills for a personal install. The folder must contain SKILL.md.
Claude Code skills documentation · loads skills from .claude/skills/
Install the "abaqus-dynamic-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysis into .claude/skills/abaqus-dynamic-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-dynamic-analysis", then confirm the skill loads.Claude Code copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$skill-installer install https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysisType this inside Codex. $skill-installer <name> installs a curated skill from openai/skills. The installer writes to $CODEX_HOME/skills (default ~/.codex/skills). Restart Codex if the skill does not show up.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a codexProject install goes to .agents/skills/; add -g for ~/.codex/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-dynamic-analysis --agent codexProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .agents/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-dynamic-analysis .agents/skills/abaqus-dynamic-analysis && rm -rf skills-srcUse ~/.agents/skills/ instead of .agents/skills for a personal install.
Codex skills documentation · loads skills from .agents/skills/
Install the "abaqus-dynamic-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysis into .agents/skills/abaqus-dynamic-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-dynamic-analysis", then confirm the skill loads.Codex copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a cursorProject install goes to .agents/skills/; add -g for ~/.cursor/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-dynamic-analysis --agent cursorProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .cursor/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-dynamic-analysis .cursor/skills/abaqus-dynamic-analysis && rm -rf skills-srcUse ~/.cursor/skills/ instead of .cursor/skills for a personal install.
Cursor skills documentation · loads skills from .cursor/skills/, .agents/skills/, .claude/skills/, .codex/skills/
Install the "abaqus-dynamic-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysis into .cursor/skills/abaqus-dynamic-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-dynamic-analysis", then confirm the skill loads.Cursor copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gemini skills install https://github.com/Cai-aa/CAE-Agent-Hub.git --path Skill/abaqus/analysis/abaqus-dynamic-analysis--scope user (default) or --scope workspace; --path is the subfolder of the repo that holds the skill; --consent skips the security confirmation prompt.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a gemini-cliProject install goes to .agents/skills/; add -g for ~/.gemini/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-dynamic-analysis --agent gemini-cliProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .gemini/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-dynamic-analysis .gemini/skills/abaqus-dynamic-analysis && rm -rf skills-srcUse ~/.gemini/skills/ instead of .gemini/skills for a personal install, then run /skills reload.
Gemini CLI skills documentation · loads skills from .gemini/skills/, .agents/skills/
Install the "abaqus-dynamic-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysis into .gemini/skills/abaqus-dynamic-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-dynamic-analysis", then confirm the skill loads.Gemini CLI copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-dynamic-analysisInstalls for Copilot at project scope by default; add --scope user for a personal install. Preview a skill first with gh skill preview. Needs GitHub CLI 2.90.0 or later (public preview).
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a github-copilotProject install goes to .agents/skills/; add -g for ~/.copilot/skills/.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .github/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-dynamic-analysis .github/skills/abaqus-dynamic-analysis && rm -rf skills-srcUse ~/.copilot/skills/ instead of .github/skills for a personal install. Commit .github/skills so cloud agent and code review can use it.
GitHub Copilot skills documentation · loads skills from .github/skills/, .claude/skills/, .agents/skills/
Install the "abaqus-dynamic-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysis into .github/skills/abaqus-dynamic-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-dynamic-analysis", then confirm the skill loads.GitHub Copilot copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
$ npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a opencodeOpenCode documents no install command of its own. Project install goes to .agents/skills/; add -g for ~/.config/opencode/skills/.
$ gh skill install Cai-aa/CAE-Agent-Hub abaqus-dynamic-analysis --agent opencodeProject scope by default (.agents/skills/); add --scope user for a personal install.
$ git clone --depth 1 https://github.com/Cai-aa/CAE-Agent-Hub.git skills-src && mkdir -p .opencode/skills && cp -r skills-src/Skill/abaqus/analysis/abaqus-dynamic-analysis .opencode/skills/abaqus-dynamic-analysis && rm -rf skills-srcUse ~/.config/opencode/skills/ instead of .opencode/skills for a personal install.
OpenCode skills documentation · loads skills from .opencode/skills/, .claude/skills/, .agents/skills/
Install the "abaqus-dynamic-analysis" agent skill from https://github.com/Cai-aa/CAE-Agent-Hub/tree/main/Skill/abaqus/analysis/abaqus-dynamic-analysis into .opencode/skills/abaqus-dynamic-analysis/ in this project. Copy the whole folder (SKILL.md and every file beside it), keep the folder name "abaqus-dynamic-analysis", then confirm the skill loads.OpenCode copies the folder itself, the same result as the manual copy. Check what it changed before you commit it.
Facts
- Skill name
abaqus-dynamic-analysis- GitHub stars
- 998
- Used in
- 1 other repo
- Token cost
- ~1.2k tokens
- SKILL.md length
- 504 words
- Files
- 4
- Skills in repo
- 57
- Repo updated
- First seen
- Licence
- MIT
At a glance
Complete workflow for dynamic analysis. An agent skill from Cai-aa/CAE-Agent-Hub.
- Works in 7 steps: Gather Information from User → Choose Explicit vs Implicit → Set Time Period → …
- User mentions impact
- SKILL.md covers When to Use This Skill, Prerequisites, Workflow: Setting Up Dynamic… and Key Parameters, plus 4 more sections
- Instructions only: no scripts, shell commands, URLs or credentials in SKILL.md
What it does
Abaqus Dynamic Analysis is an agent skill from Cai-aa/CAE-Agent-Hub. Complete workflow for dynamic analysis. Use when user mentions impact, crash, drop test, transient, or time-varying response. Handles explicit and implicit dynamics.
Its SKILL.md is about 1.2k tokens, which your agent loads only when the skill is triggered. The skill folder holds 3 other files (for example `UPSTREAM.md` and `metadata.json`).
The licence is MIT.
When your agent uses it
- User mentions impact
- Time-varying response
Example prompts
- “/abaqus-dynamic-analysis”
Requirements
- Pre-approved tools (allowed-tools): Read, Write, Edit, Glob, Grep, Bash(abaqus:*), Skill
Workflow steps
7 steps, taken from the step headings in SKILL.md.
What it can do on your machine
Read from SKILL.md and the folder at commit 194ef49. It shows what the files ask for, not the result of running them.
Tool permissions
Pre-approves these tools, so the agent can use them without asking each time:
ReadWriteEditGlobGrepBash(abaqus:*)Skill
From allowed-tools in the SKILL.md frontmatter.
Runs code
No scripts in the folder and no shell commands in SKILL.md.
From the folder's file list and the shell code blocks in SKILL.md.
Network
No URLs in SKILL.md.
From URLs in SKILL.md, links to its own repository left out.
Credentials
Names no API keys, tokens, secrets or passwords.
From names ending in _API_KEY, _TOKEN, _SECRET, _KEY or _PASSWORD in SKILL.md.
Context cost
Abaqus Dynamic Analysis loads about 1.2k tokens when it runs. Until then it costs about 47 tokens; SKILL.md has 504 words of instructions outside code blocks.
Estimates: characters ÷ 4, the usual rule of thumb; real counts depend on the model's tokenizer. Scripts and assets cost tokens only if the agent reads them.
Safety
Auto-check passed
The automated check found no risky patterns in SKILL.md.
Automated static check — not a guarantee. Review scripts before installing. It scans the text of SKILL.md for risky patterns (piping downloads into a shell, reading credential files, hidden Unicode, destructive commands); files beside SKILL.md are not scanned.
SKILL.md
The full file from Cai-aa/CAE-Agent-Hub at commit 194ef49, republished under its MIT licence (© Cai-aa). 504 words, ~1,211 tokens.
Download SKILL.mdSave it as
.claude/skills/abaqus-dynamic-analysis/SKILL.md (or your agent's skills folder). This skill also uses 3 other files; get the full folder from GitHub.- name
- abaqus-dynamic-analysis
- description
- Complete workflow for dynamic analysis. Use when user mentions impact, crash, drop test, transient, or time-varying response. Handles explicit and implicit dynamics.
- allowed-tools
- Read, Write, Edit, Glob, Grep, Bash(abaqus:*), Skill
Abaqus Dynamic Analysis Skill
This skill handles explicit and implicit dynamics for impact, crash, drop test, and transient response analysis.
When to Use This Skill
Route here when user mentions:
- Impact, crash, collision, drop test
- Transient response, time-varying response
- Shock loading, blast loading, explosive loading
- High-speed events, wave propagation
- "What happens when it hits..."
Route elsewhere:
- Natural frequency extraction →
/abaqus-modal-analysis - Static/constant loads →
/abaqus-static-analysis - Harmonic/sinusoidal response → modal + steady-state dynamics
- Very long transients (minutes+) → consider implicit or quasi-static
Prerequisites
Before dynamic analysis:
- Geometry and mesh ready
- Material MUST have density defined (required for mass matrix)
- Understand event duration and loading type
Workflow: Setting Up Dynamic Analysis
Step 1: Gather Information from User
Ask if unclear:
- What's the event duration? Milliseconds, seconds, or longer?
- Initial velocity? For drop tests or impact
- Is contact involved? Parts colliding or touching
- What output needed? Stress, velocity, acceleration, energy?
Step 2: Choose Explicit vs Implicit
| Factor | Explicit | Implicit |
|---|---|---|
| Time scale | Short (us to ms) | Longer (ms to s) |
| Step size | Automatic (very small) | User-controlled |
| Nonlinearity | Handles well | May need iterations |
| Memory | Lower | Higher |
| Contact | Natural handling | Needs care |
| Best for | Impact, crash | Vibration, long transient |
Decision rule:
- Event < 10ms with impact/contact → Explicit
- Event > 100ms without severe nonlinearity → Implicit
- In between → Either can work, explicit often easier
Step 3: Set Time Period
| Event Type | Typical Duration |
|---|---|
| High-speed impact | 0.1-10 ms |
| Drop test | 1-100 ms |
| Blast loading | 1-50 ms |
| Seismic/vibration | 1-100 s |
Step 4: Define Initial Conditions
For drop tests and impact:
- Set initial velocity on the impacting part/region
- Velocity is applied in the Initial step
Step 5: Configure Output
Field outputs: S (stress), U (displacement), V (velocity), A (acceleration), PEEQ (plastic strain)
History outputs for energy balance (explicit): ALLKE, ALLIE, ALLWK, ETOTAL
Show full SKILL.md (217 more words)Show less
Step 6: Consider Mass Scaling (Explicit Only)
| Option | Effect | When |
|---|---|---|
| None | True inertia | Very short events, accuracy critical |
| At beginning | Scale once | Quasi-static explicit |
| Throughout | Continuous scaling | When inertia less important |
Warning: Mass scaling speeds up analysis but affects inertial response.
Step 7: Run and Validate
Use /abaqus-job to submit, then check:
- Energy balance (ETOTAL approximately constant)
- Stable time increment (explicit)
- Results physically reasonable
Key Parameters
| Parameter | Explicit | Implicit |
|---|---|---|
| Time period | Event duration | Event duration |
| Time increment | Automatic | Specify initial, min, max |
| Element library | EXPLICIT | STANDARD |
| Element type | C3D8R recommended | C3D8R or C3D8 |
| Hourglass control | ENHANCED | Default |
Validation Checklist
- Density defined in material
- Time period appropriate for event
- Initial conditions applied (velocity, position)
- Output frequency captures behavior (100+ frames typical)
- Energy balance acceptable (ETOTAL constant for explicit)
- Results physically reasonable
Troubleshooting
| Problem | Likely Cause | Solution |
|---|---|---|
| "Time increment too small" | Small/distorted elements | Use mass scaling or coarsen mesh |
| Energy balance error | Hourglass or instability | Check hourglass energy, add control |
| Analysis takes forever (explicit) | Long time period | Consider implicit instead |
| Convergence failure (implicit) | Severe nonlinearity | Use explicit or smaller increments |
Related Skills
/abaqus-material- Define density (required)/abaqus-amplitude- Time-varying loads/abaqus-field- Initial velocity and predefined fields/abaqus-interaction- Contact for impact problems/abaqus-odb- Results extraction
Code Patterns
For API syntax and code examples, see:
© Cai-aa, MIT. Rendered from Markdown: HTML in the file is shown as text, images as links, and headings moved down two levels. Raw file
Files
SKILL.md and 3 other files in Skill/abaqus/analysis/abaqus-dynamic-analysis of Cai-aa/CAE-Agent-Hub.
- SKILL.md
- UPSTREAM.md
- UPSTREAM_LICENSE
- metadata.json
Open the folder on GitHubat commit 194ef49
Used in 1 other repository
We found 1 copy of this SKILL.md (exact, near-identical or edited) in other folders, from 1 other GitHub owner. This page covers the copy in Cai-aa/CAE-Agent-Hub, which our catalogue first saw on October 7, 2026.
Compare with similar skills
Abaqus Dynamic Analysis next to the 5 skills that share the most tags, products or categories with it. Stars are the repository's; “used in” counts other GitHub owners with a copy.
| Skill | Stars | Used in | Tokens | Auto-check | Licence | Repo updated |
|---|---|---|---|---|---|---|
| Abaqus Dynamic Analysis this skillCai-aa/CAE-Agent-Hub | 998 | 1 repos | ~1.2k | Automated safety check: Pass | MIT | |
| Dynamic Workflow Modeaffaan-m/ECC | 275k | 1 repos | ~1.3k | Automated safety check: Pass | MIT | |
| Molecular DynamicsK-Dense-AI/scientific-agent-skills | 48k | 1 repos | ~4.7k | Automated safety check: Pass | MIT | |
| Dynamic WorkflowNousResearch/hermes-agent | 252k | — | ~2.8k | Automated safety check: Pass | MIT | |
| Dynamic Workflowszai-org/ZCode | 7.5k | — | ~23k | Automated safety check: Pass | Apache-2.0 | |
| Performing Dynamic Analysis With Any Runmukul975/Anthropic-Cybersecurity-Skills | 34k | — | ~2.8k | Automated safety check: Pass | Apache-2.0 |
Similar skills
Molecular Dynamics
K-Dense-AI/scientific-agent-skills
Runs and analyzes molecular dynamics simulations with OpenMM and MDAnalysis.
Dynamic Workflow
NousResearch/hermes-agent
Plan-in-code fan-outs, adversarial verification, waves. An agent skill from NousResearch/hermes-agent.
Dynamic Workflows
zai-org/ZCode
A skill your agent uses when writing, debugging, or resubmitting a dynamic-workflow script for the CreateWorkflow tool: choosing subagent topology, typing subagent results, fanning out over files or…
Performing Dynamic Analysis With Any Run
mukul975/Anthropic-Cybersecurity-Skills
Perform interactive dynamic malware analysis using the ANY.RUN cloud sandbox to detonate samples, observe real-time execution behavior, interact with malware prompts such as dialogs and CAPTCHAs…
Performing Privacy Impact Assessment
mukul975/Anthropic-Cybersecurity-Skills
Automates the Privacy Impact Assessment (PIA) workflow including data flow mapping, privacy risk scoring matrices, GDPR Article 35 DPIA and CCPA/CPRA alignment checks, data inventory cataloging, and…
More from Cai-aa/CAE-Agent-Hub
All 57 skills in this repoAnsys Structural Workbench
Cai-aa/CAE-Agent-Hub
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and…
Cylinder O Grid
Cai-aa/CAE-Agent-Hub
Plan, create, adapt, and quality-audit coin-style five-block O-grid hexahedral meshes for cylindrical CAE models.
Comsol Motor Nvh Evidence
Cai-aa/CAE-Agent-Hub
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH.
Aedt Evidence Electromagnetics
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Electronics Desktop and PyAEDT automation for Maxwell, HFSS, Q3D, Icepak, and related electromagnetic workflows.
Ansys Mechanical Evidence Structural
Cai-aa/CAE-Agent-Hub
Evidence-first Ansys Mechanical structural automation through Workbench RunWB2 journals, Mechanical Scripting/ACT ExtAPI, or PyMechanical gRPC.
Run Fluent Autoclave
Cai-aa/CAE-Agent-Hub
Run, diagnose, reproduce, and validate ANSYS Fluent CFD simulations of forced-convection autoclaves using Fluent MCP or PyFluent.
Questions about Abaqus Dynamic Analysis
What does Abaqus Dynamic Analysis do?
Complete workflow for dynamic analysis. An agent skill from Cai-aa/CAE-Agent-Hub. Abaqus Dynamic Analysis is an agent skill from Cai-aa/CAE-Agent-Hub. Complete workflow for dynamic analysis.
When should I use Abaqus Dynamic Analysis?
Abaqus Dynamic Analysis fits situations like: user mentions impact; time-varying response.
How do I install Abaqus Dynamic Analysis in Claude Code?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a claude-code`. Or copy the skill folder (Skill/abaqus/analysis/abaqus-dynamic-analysis in Cai-aa/CAE-Agent-Hub) into .claude/skills/abaqus-dynamic-analysis in your project. Claude Code loads it when a task matches its description.
How do I install Abaqus Dynamic Analysis in Codex?
Run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a codex`. Or copy the skill folder (Skill/abaqus/analysis/abaqus-dynamic-analysis in Cai-aa/CAE-Agent-Hub) into .agents/skills/abaqus-dynamic-analysis in your project. Codex loads it when a task matches its description.
Can I use Abaqus Dynamic Analysis in Cursor, Gemini CLI or GitHub Copilot?
Cursor, Gemini CLI, GitHub Copilot and OpenCode also load SKILL.md folders. With the skills CLI, run `npx skills add Cai-aa/CAE-Agent-Hub --skill abaqus-dynamic-analysis -a cursor` (or -a gemini-cli, github-copilot or opencode for the others). To copy it by hand, put the folder in .cursor/skills/abaqus-dynamic-analysis, .gemini/skills/abaqus-dynamic-analysis, .github/skills/abaqus-dynamic-analysis and .opencode/skills/abaqus-dynamic-analysis in your project.
What does Abaqus Dynamic Analysis need to run?
SKILL.md names no scripts, command-line tools or credentials: Abaqus Dynamic Analysis is instructions for the agent only. Its frontmatter pre-approves these tools: Read, Write, Edit, Glob, Grep, Bash(abaqus:*), Skill.
Does Abaqus Dynamic Analysis access the network?
SKILL.md contains no URLs. Any network use would come from the scripts or tools the agent runs. This is read from the text; nothing was executed.
Is Abaqus Dynamic Analysis safe to install?
Our automated static check of SKILL.md found no risky patterns, such as piping downloads into a shell, reading credential files or hidden Unicode. It is not a guarantee. Review the folder before installing.
What licence does Abaqus Dynamic Analysis use?
Abaqus Dynamic Analysis is published under the MIT licence (the repository's licence). It allows redistribution, so the full SKILL.md is shown on this page.
How many tokens does Abaqus Dynamic Analysis use?
About 1.2k tokens (SKILL.md is roughly 4.8k characters). Agents keep only the skill's name and description in context until a task matches; then they load SKILL.md in full.
What are the alternatives to Abaqus Dynamic Analysis?
Skills that share tags, products or a category with Abaqus Dynamic Analysis: Dynamic Workflow Mode (affaan-m/ECC, 275k stars), Molecular Dynamics (K-Dense-AI/scientific-agent-skills, 48k stars), Dynamic Workflow (NousResearch/hermes-agent, 252k stars) and Dynamic Workflows (zai-org/ZCode, 7.5k stars). The comparison table on this page puts their stars, adoption, token cost, safety result and licence side by side.
Who maintains Abaqus Dynamic Analysis?
Cai-aa (a GitHub user) maintains it in Cai-aa/CAE-Agent-Hub, which has 998 GitHub stars. The repository holds 57 skills in this directory. The repository was last updated on September 30, 2026.
Source: Cai-aa/CAE-Agent-Hub on GitHub. Facts on this page come from the repository at the commit we read; the author's words are quoted as theirs.