Querying AWS Redshift

Query AWS Redshift System Tables

Overview

Works best with the AWS MCP server for sandboxed execution and audit logging. All commands below use the AWS CLI and work in any environment with configured AWS credentials. Use IAM roles or temporary credentials; avoid long-lived access keys.

Redshift can publish system tables — the SYS_* monitoring data such as sys_query_history, sys_query_detail, and sys_connection_log — to S3 Tables as continuously-updated Apache Iceberg tables.

Terminology used throughout: system table refers to a SYS_* dataset generally, and each one maps 1:1 to a published Iceberg table. Where this skill says SYS_ view, it means specifically the live in-cluster object you query on the cluster itself — that is a view, and it is a different thing from the published S3 Tables copy. This applies to both Provisioned clusters and Serverless namespaces. It is an opt-in extension of the existing logging APIs. Published tables are read-only, stored in the AWS-managed aws-redshift table bucket, and queryable via any Iceberg-compatible engine including Amazon Athena and Amazon Redshift itself.

Querying the S3 Tables copy is preferred over the live in-cluster SYS_ views when analyzing historical or high-volume system-table data because:

• The in-cluster SYS_ views have a limited retention window; S3 Tables retains history well beyond it.
• Querying S3 Tables adds no load to the running Redshift cluster.
• The logs are Iceberg tables, so they can be queried at scale from any Iceberg-compatible engine and joined with other lake data.

Decision Tree

Supported Data Sources

Both compute types publish into the same AWS-managed aws-redshift table bucket and are queried identically once published. They differ only in the enable/disable API surface and in the casing of the status response — see the flag and field tables in Common Tasks.

Not covered by this skill: Redshift audit logs delivered to S3 or CloudWatch (useractivitylog, userlog, connectionlog), which use the separate --log-exports mechanism on Serverless and are not SYS_* system tables.

Common Tasks

1. Check If Configured

Before querying, confirm the cluster or namespace is publishing to S3 Tables.

# Provisioned
aws redshift describe-logging-status --region <REGION> --cluster-identifier <CLUSTER_ID>
# Serverless
aws redshift-serverless get-namespace --region <REGION> --namespace-name <NAMESPACE_NAME>

Interpret the response. The two compute types return the same information under different field names and casing — Provisioned uses PascalCase under S3Tables, Serverless uses camelCase under namespace.s3TablePublishStatus:

Notes:

• LogDestinationType is a comma-joined list when more than one destination is active — e.g. "cloudwatch,s3table". Test with a substring/contains check, not equality against s3table.
• An empty LastIngestionTimes / lastIngestionTimes map, or a table listed as published but absent from the map, means data for that table may still be in flight. Compare successive values to confirm new data is landing.
• On Serverless, do not read the top-level logExports field for this feature — that field carries the CloudWatch/S3 audit logs (useractivitylog, userlog, connectionlog) and is unrelated to SYS_* S3 Tables publishing.

2. Enable (if not configured)

# Provisioned
aws redshift enable-logging --region <REGION> --cluster-identifier <CLUSTER_ID> --log-destination-type s3table --log-exports <SYS_TABLE>... --s3-table-granularity <cluster|account> --s3-table-kms-key-id <KMS_KEY_ARN>
# Serverless
aws redshift-serverless update-namespace --region <REGION> --namespace-name <NAMESPACE_NAME> --log-destination-type s3table --s3-table-names <SYS_TABLE>... --s3-table-action Enable --s3-table-granularity <namespace|account> --s3-table-kms-key-id <KMS_KEY_ARN>

--s3-table-kms-key-id is part of both commands deliberately, not an optional add-on. Omitting it does not fail — the tables fall back to an AWS-owned key you cannot audit, restrict by policy, or revoke. Because SYS_* tables carry query_text, user_name, and remote_host, treat the customer-managed key as the default and drop the flag only for throwaway environments.

Enable from AWS console Amazon Redshift Console > Clusters > select your cluster > Tabs > Integrations / System table integration

The two compute types take different flags for the same feature. Do not carry Provisioned flag names over to Serverless:

Notes:

• Granularity: Provisioned supports cluster (default) or account; Serverless supports namespace (default) or account.
• cluster/namespace granularity → one S3 table per cluster/namespace; account → one shared table for all clusters/namespaces per account per region.
• Use all to publish all available SYS_* tables — --log-exports all on Provisioned, --s3-table-names all on Serverless.
• Encryption at rest is strongly recommended for production. Without --s3-table-kms-key-id the published tables are encrypted with an AWS-owned key, which you cannot audit, restrict by policy, or revoke. SYS_* tables carry query_text, user_name, and remote_host (see Security Considerations), so pass a customer-managed key. Grant key access using the complete key policy in ${SKILL_DIR}/references/security.md rather than an abbreviated action list — it needs two service principals (systemtables.redshift.amazonaws.com for publishing and maintenance.s3tables.amazonaws.com for table maintenance/compaction). Provisioning only the publishing principal lets writes succeed while compaction silently fails.
• Both operations accept --dry-run to validate the request without changing anything. Provisioned returns a DryRunOperation error on success ("Request would have succeeded, but DryRun flag is set"); Serverless returns an empty body and exit code 0. Note that the Serverless dry-run validates request shape only, not parameter values, so a successful dry-run there does not guarantee the values are accepted.

Disable selectively:

# Provisioned
aws redshift disable-logging --region <REGION> --cluster-identifier <CLUSTER_ID> --log-destination-type s3table --log-exports <SYS_TABLE>...
# Serverless
aws redshift-serverless update-namespace --region <REGION> --namespace-name <NAMESPACE_NAME> --log-destination-type s3table --s3-table-names <SYS_TABLE>... --s3-table-action Disable

3. Verify Permissions

Full setup commands for both paths: ${SKILL_DIR}/references/permissions-setup.md. Load it before creating roles or registering resources.

Athena path — needs the s3tablescatalog/aws-redshift catalog registered in Glue, a workgroup with an output location, and S3 Tables read permissions. Confirm the catalog is queryable:

aws glue get-databases --region <REGION> \
  --catalog-id "<ACCOUNT>:s3tablescatalog/aws-redshift"

Namespaces returned → registered and queryable. EntityNotFoundException / CATALOG_NOT_FOUND → the S3 Tables integration is not enabled (S3 console > Table buckets > Enable integration). Encrypt the workgroup output location — Athena writes full result sets, including query_text and user_name, to S3.

Redshift auto-mount path — needs a Provisioned RA3 cluster and a four-step setup: create the query_s3_tables role (trust policy must name both redshift.amazonaws.com and lakeformation.amazonaws.com, the latter with all four of sts:AssumeRole, sts:SetContext, sts:SetSourceIdentity, sts:TagSession), attach it to the cluster, register the table bucket with Lake Formation, and add the Redshift service-linked roles to ReadOnlyAdmins. Constraints that cause most failures:

• Condition both trust statements on aws:SourceAccount — a bare service principal is a confused-deputy risk.
• Do not attach AWSLakeFormationDataAdmin to the cluster's query role. It is needed only by the principal performing setup, and only during setup. The cluster's role needs read access alone.
• Auto-mount is a poll, not a callback — the catalog can take up to 300 seconds to appear in pg_database. A cluster reboot forces immediate discovery.

4. Identify the Target Table

Namespace — resolve it from the API, do not construct it:

• Read S3Tables.S3TableNamespace from describe-logging-status (Provisioned) or s3TablePublishStatus.s3TableNamespace from get-namespace (Serverless) and use it verbatim.
• Optional sanity check only: the API value typically follows <namespace_arn_id>_sys for cluster/namespace granularity and <account>_sys for account granularity. Use this only to verify the value looks right — never to generate the namespace when the API response is unavailable.

Table — each publishable system table maps 1:1 to a table in the aws-redshift table bucket. Do not work from a memorized list — resolve it at runtime, in this order:

1. The published set for this cluster/namespace — S3Tables.S3Tables (Provisioned) or s3TablePublishStatus.s3Tables (Serverless) from the status call above, e.g. sys_query_history. This is the only authoritative answer to "what can I query right now".
2. The set this API accepts — aws redshift enable-logging help (accepted --log-exports values) or aws redshift-serverless update-namespace help (accepted --s3-table-names values).
3. What each table contains — the public Redshift SYS monitoring views reference, which documents every SYS_* view and its columns. AWS adds views over time, so treat the docs as the current list rather than hardcoding one.

Column names and types come from the same public reference, or from the live table:

aws glue get-table --region <REGION> \
  --catalog-id "<ACCOUNT>:s3tablescatalog/aws-redshift" \
  --database-name "<NAMESPACE>" --name "<SYS_TABLE>"

Two caveats when reading the public docs against a published table: enum-valued columns (query_type, status, event) gain values over time, so confirm with SELECT DISTINCT rather than filtering on an assumed set; and the published Iceberg table prepends warehouse-identity columns (warehouse_name, warehouse_namespace_arn, and peers) that the in-cluster SYS_ view does not have — they are how you tell apart multiple clusters publishing at account granularity.