Rtl Specification Consistency Checker

RTL-Specification Consistency Checker

Overview

This skill enables systematic checking of behavioral consistency between high-level hardware specifications and RTL implementations. It extracts requirements from specifications, maps them to RTL logic, and classifies each requirement as satisfied, violated, underspecified, or uncheckable.

Consistency Checking Workflow

Follow this sequential process to check RTL-specification consistency:

1. Parse and Understand Inputs

Read and analyze both the specification and RTL code:

Specification Analysis:

• Identify the format (natural language, tables, timing diagrams, protocol rules)
• Extract all behavioral requirements
• Note any assumptions or constraints
• Identify ambiguous or incomplete sections

RTL Analysis:

• Identify the HDL language (Verilog, VHDL, SystemVerilog)
• Locate key modules and their interfaces
• Identify state machines, registers, and control logic
• Note clock domains and reset strategies

2. Extract Behavioral Requirements

Formalize each requirement from the specification:

Requirement Types:

Functional Requirements:

• Input-output relationships
• State transitions
• Data transformations
• Protocol sequences

Timing Requirements:

• Setup/hold times
• Latency constraints
• Throughput requirements
• Clock cycle counts

Safety Properties:

• Invariants that must always hold
• Forbidden states or transitions
• Mutual exclusion constraints
• Data integrity conditions

Liveness Properties:

• Progress guarantees
• Eventual responses
• Fairness conditions

For each requirement, document:

• Requirement ID
• Description in natural language
• Formalized property (if possible)
• Source location in specification
• Priority/criticality

3. Map Requirements to RTL

Identify RTL constructs corresponding to each requirement:

Signal Mapping:

• Map specification signals to RTL signals
• Identify relevant registers and wires
• Note signal widths and types

Logic Mapping:

• Identify modules implementing each requirement
• Locate state machines and control logic
• Find combinational and sequential logic blocks
• Note line numbers and code locations

State Mapping:

• Map specification states to RTL state encodings
• Identify state registers and transition logic
• Document state machine structure

4. Check Consistency

For each requirement, verify RTL behavior:

Verification Methods:

Static Analysis:

• Check signal connectivity
• Verify state machine completeness
• Analyze control flow paths
• Check for missing cases or conditions

Trace Analysis:

• Construct example execution traces
• Check if traces satisfy requirements
• Look for counterexamples
• Verify timing constraints

Pattern Matching:

• Compare RTL patterns against specification patterns
• Check for common implementation errors
• Verify protocol compliance

5. Classify Requirements

Assign each requirement to one of four categories:

✅ Satisfied:

• RTL correctly implements the requirement
• All test cases pass
• No violations found

❌ Violated:

• RTL behavior contradicts the requirement
• Counterexample exists
• Clear mismatch identified

⚠️ Underspecified:

• Specification is ambiguous or incomplete
• Multiple valid interpretations exist
• Missing details prevent verification

❓ Uncheckable:

• Missing environmental assumptions
• Depends on external components
• Requires information not provided

6. Document Violations

For each violated requirement, provide detailed analysis:

Violation Report Structure:

Requirement ID: REQ-XXX
Status: ❌ VIOLATED

Description:
[What the requirement specifies]

RTL Location:
Module: [module_name]
File: [file_path]
Lines: [line_numbers]

Mismatch Explanation:
[Clear explanation of how RTL differs from spec]

Example Trace:
Cycle | Signal1 | Signal2 | State | Expected | Actual
------|---------|---------|-------|----------|-------
  0   |    0    |    1    | IDLE  |   IDLE   |  IDLE
  1   |    1    |    1    | IDLE  |   BUSY   |  IDLE  <- Violation
  2   |    1    |    0    | IDLE  |   DONE   |  IDLE

Root Cause:
[Analysis of why the violation occurs]

Suggested Fix:
[Proposed correction to RTL]

7. Generate Consistency Report

Produce a structured report with all findings:

Report Structure

Executive Summary

Total Requirements: X
✅ Satisfied: Y (Z%)
❌ Violated: A (B%)
⚠️ Underspecified: C (D%)
❓ Uncheckable: E (F%)

Critical Violations: G

Detailed Findings

For each requirement, include:

REQ-001: [Requirement Name]

Status: [✅/❌/⚠️/❓] Priority: [High/Medium/Low] Category: [Functional/Timing/Safety/Liveness]

Specification: [Requirement description from spec]

RTL Mapping:

• Module: [module_name]
• Signals: [signal_list]
• Lines: [line_numbers]

Analysis: [Detailed consistency check results]

[If violated] Violation Details: [Explanation, trace, root cause, suggested fix]

[If underspecified] Clarification Needed: [What information is missing or ambiguous]

[If uncheckable] Missing Assumptions: [What additional information is required]