Skill Creator

Skill Creator

A skill for creating new skills and iteratively improving them.

ENVIRONMENT: ScienceClaw — You are running in ScienceClaw. There are NO subagents, NO task tool, NO claude CLI. Do NOT attempt to spawn subagents or call task. For eval/testing, saving, and improving skills, follow the ScienceClaw-Specific Instructions section at the bottom of this file. The "Creating a skill" section below is universal and can be followed as-is. All other sections (Running and evaluating test cases, Improving the skill, Blind comparison, Description Optimization) are Claude Code-specific — SKIP them entirely and use the ScienceClaw equivalents instead.

Your job is to figure out where the user is in the skill creation process and help them progress. The high-level flow is: draft → test → review → improve → repeat.

• If the user wants to create a new skill, help narrow down what they mean, write a draft, then offer to test it
• If they already have a draft, go straight to the eval/iterate part
• If they just want a quick change, skip the full eval cycle
• Always be flexible — if the user says "just vibe with me", do that instead

Communicating with the user

The skill creator is liable to be used by people across a wide range of familiarity with coding jargon. If you haven't heard (and how could you, it's only very recently that it started), there's a trend now where the power of Claude is inspiring plumbers to open up their terminals, parents and grandparents to google "how to install npm". On the other hand, the bulk of users are probably fairly computer-literate.

So please pay attention to context cues to understand how to phrase your communication! In the default case, just to give you some idea:

• "evaluation" and "benchmark" are borderline, but OK
• for "JSON" and "assertion" you want to see serious cues from the user that they know what those things are before using them without explaining them

It's OK to briefly explain terms if you're in doubt, and feel free to clarify terms with a short definition if you're unsure if the user will get it.

Creating a skill

Capture Intent

Start by understanding the user's intent. The current conversation might already contain a workflow the user wants to capture (e.g., they say "turn this into a skill"). If so, extract answers from the conversation history first — the tools used, the sequence of steps, corrections the user made, input/output formats observed. The user may need to fill the gaps, and should confirm before proceeding to the next step.

1. What should this skill enable Claude to do?
2. When should this skill trigger? (what user phrases/contexts)
3. What's the expected output format?
4. Should we set up test cases to verify the skill works? Skills with objectively verifiable outputs (file transforms, data extraction, code generation, fixed workflow steps) benefit from test cases. Skills with subjective outputs (writing style, art) often don't need them. Suggest the appropriate default based on the skill type, but let the user decide.

Interview and Research

Proactively ask questions about edge cases, input/output formats, example files, success criteria, and dependencies. Wait to write test prompts until you've got this part ironed out.

Use web_search and web_crawl to research. When the skill involves external APIs, services, data sources, or technical workflows you're not 100% sure about, use seekr_sdk (from seekr_sdk import web_search, web_crawl) to verify current information before writing instructions. This includes:

• Confirming API endpoints, parameters, and response formats are still valid
• Looking up best practices, official documentation, or community patterns
• Finding similar skills or workflows for inspiration
• Verifying that libraries, tools, or services mentioned in the skill actually exist and work as described

Come prepared with context to reduce burden on the user.

Write the SKILL.md

YAML Frontmatter is MANDATORY. Every SKILL.md MUST start with YAML frontmatter wrapped in --- fences containing name and description. Without frontmatter, the skill will have an empty description in the "Available Skills" list, and the agent will never know what the skill does — it simply won't be triggered. This is the #1 cause of skills not working after creation.

The SKILL.md must follow this exact structure:

---
name: my-skill-name
description: "What this skill does and when to trigger it. Be specific and pushy."
---

# my-skill-name

(rest of the skill body — instructions, examples, etc.)

Frontmatter fields:

• name (required): Skill identifier, should match the directory name.
• description (required): This is the primary triggering mechanism — the agent reads this to decide whether to use the skill. Include both what the skill does AND specific contexts/phrases for when to use it. All "when to use" info goes here, not in the body. Make the description "pushy" — err on the side of triggering too often rather than too rarely. For instance, instead of "Build a dashboard.", write "Build dashboards for data visualization. Use this whenever the user mentions dashboards, charts, metrics display, data overview, reporting, or wants to visualize any kind of data, even if they don't explicitly ask for a 'dashboard.'" Include both Chinese and English trigger phrases if the skill may be used in bilingual contexts.
• compatibility (optional): Required tools, dependencies (rarely needed).

Then write the rest of the skill body (instructions, examples, output format, etc.).

Skill Writing Guide

Anatomy of a Skill

skill-name/
├── SKILL.md (required)
│   ├── YAML frontmatter (--- name + description ---, MANDATORY or skill won't trigger)
│   └── Markdown body (instructions, examples, output format)
└── Bundled Resources (optional)
    ├── scripts/    - Executable code for deterministic/repetitive tasks
    ├── references/ - Docs loaded into context as needed
    └── assets/     - Files used in output (templates, icons, fonts)

Progressive Disclosure

Skills use a three-level loading system:

1. Metadata (name + description) - Always in context (~100 words)
2. SKILL.md body - In context whenever skill triggers (<500 lines ideal)
3. Bundled resources - As needed (unlimited, scripts can execute without loading)

These word counts are approximate and you can feel free to go longer if needed.

Key patterns:

• Keep SKILL.md under 500 lines; if you're approaching this limit, add an additional layer of hierarchy along with clear pointers about where the model using the skill should go next to follow up.
• Reference files clearly from SKILL.md with guidance on when to read them
• For large reference files (>300 lines), include a table of contents

Domain organization: When a skill supports multiple domains/frameworks, organize by variant:

cloud-deploy/
├── SKILL.md (workflow + selection)
└── references/
    ├── aws.md
    ├── gcp.md
    └── azure.md

Claude reads only the relevant reference file.

Principle of Lack of Surprise

This goes without saying, but skills must not contain malware, exploit code, or any content that could compromise system security. A skill's contents should not surprise the user in their intent if described. Don't go along with requests to create misleading skills or skills designed to facilitate unauthorized access, data exfiltration, or other malicious activities. Things like a "roleplay as an XYZ" are OK though.

Writing Patterns

Prefer using the imperative form in instructions.

Defining output formats - You can do it like this:

## Report structure
ALWAYS use this exact template:
# [Title]
## Executive summary
## Key findings
## Recommendations

Examples pattern - It's useful to include examples. You can format them like this (but if "Input" and "Output" are in the examples you might want to deviate a little):

## Commit message format
**Example 1:**
Input: Added user authentication with JWT tokens
Output: feat(auth): implement JWT-based authentication

Writing Style

Try to explain to the model why things are important in lieu of heavy-handed musty MUSTs. Use theory of mind and try to make the skill general and not super-narrow to specific examples. Start by writing a draft and then look at it with fresh eyes and improve it.

Test Cases

After writing the skill draft, come up with 2-3 realistic test prompts — the kind of thing a real user would actually say. Share them with the user: [you don't have to use this exact language] "Here are a few test cases I'd like to try. Do these look right, or do you want to add more?" Then run them.

Save test cases to evals/evals.json. Don't write assertions yet — just the prompts. You'll draft assertions in the next step while the runs are in progress.

{
  "skill_name": "example-skill",
  "evals": [
    {
      "id": 1,
      "prompt": "User's task prompt",
      "expected_output": "Description of expected result",
      "files": []
    }
  ]
}

See references/schemas.md for the full schema (including the assertions field, which you'll add later).

Running and evaluating test cases

⚠️ SCIENCECLAW: SKIP THIS ENTIRE SECTION. This section requires subagents and task tool which are NOT available. Go to ScienceClaw-Specific Instructions → Eval / Improve Cycle instead.

<!-- Original Claude Code instructions preserved for reference -->

This section is one continuous sequence — don't stop partway through. Do NOT use /skill-test or any other testing skill.

Put results in <skill-name>-workspace/ as a sibling to the skill directory. Within the workspace, organize results by iteration (iteration-1/, iteration-2/, etc.) and within that, each test case gets a directory (eval-0/, eval-1/, etc.). Don't create all of this upfront — just create directories as you go.

Step 1: Spawn all runs (with-skill AND baseline) in the same turn

For each test case, spawn two subagents in the same turn — one with the skill, one without. This is important: don't spawn the with-skill runs first and then come back for baselines later. Launch everything at once so it all finishes around the same time.

With-skill run:

Execute this task:
- Skill path: <path-to-skill>
- Task: <eval prompt>
- Input files: <eval files if any, or "none">
- Save outputs to: <workspace>/iteration-<N>/eval-<ID>/with_skill/outputs/
- Outputs to save: <what the user cares about — e.g., "the .docx file", "the final CSV">

Baseline run (same prompt, but the baseline depends on context):

• Creating a new skill: no skill at all. Same prompt, no skill path, save to without_skill/outputs/.
• Improving an existing skill: the old version. Before editing, snapshot the skill (cp -r <skill-path> <workspace>/skill-snapshot/), then point the baseline subagent at the snapshot. Save to old_skill/outputs/.

Write an eval_metadata.json for each test case (assertions can be empty for now). Give each eval a descriptive name based on what it's testing — not just "eval-0". Use this name for the directory too. If this iteration uses new or modified eval prompts, create these files for each new eval directory — don't assume they carry over from previous iterations.

{
  "eval_id": 0,
  "eval_name": "descriptive-name-here",
  "prompt": "The user's task prompt",
  "assertions": []
}

Step 2: While runs are in progress, draft assertions

Don't just wait for the runs to finish — you can use this time productively. Draft quantitative assertions for each test case and explain them to the user. If assertions already exist in evals/evals.json, review them and explain what they check.

Good assertions are objectively verifiable and have descriptive names — they should read clearly in the benchmark viewer so someone glancing at the results immediately understands what each one checks. Subjective skills (writing style, design quality) are better evaluated qualitatively — don't force assertions onto things that need human judgment.

Update the eval_metadata.json files and evals/evals.json with the assertions once drafted. Also explain to the user what they'll see in the viewer — both the qualitative outputs and the quantitative benchmark.

Step 3: As runs complete, capture timing data

When each subagent task completes, you receive a notification containing total_tokens and duration_ms. Save this data immediately to timing.json in the run directory:

{
  "total_tokens": 84852,
  "duration_ms": 23332,
  "total_duration_seconds": 23.3
}

This is the only opportunity to capture this data — it comes through the task notification and isn't persisted elsewhere. Process each notification as it arrives rather than trying to batch them.

Step 4: Grade, aggregate, and launch the viewer

Once all runs are done:

1. Grade each run — spawn a grader subagent (or grade inline) that reads agents/grader.md and evaluates each assertion against the outputs. Save results to grading.json in each run directory. The grading.json expectations array must use the fields text, passed, and evidence (not name/met/details or other variants) — the viewer depends on these exact field names. For assertions that can be checked programmatically, write and run a script rather than eyeballing it — scripts are faster, more reliable, and can be reused across iterations.

2. Aggregate into benchmark — run the aggregation script from the skill-creator directory:

   python -m scripts.aggregate_benchmark <workspace>/iteration-N --skill-name <name>

   This produces benchmark.json and benchmark.md with pass_rate, time, and tokens for each configuration, with mean ± stddev and the delta. If generating benchmark.json manually, see references/schemas.md for the exact schema the viewer expects. Put each with_skill version before its baseline counterpart.

3. Do an analyst pass — read the benchmark data and surface patterns the aggregate stats might hide. See agents/analyzer.md (the "Analyzing Benchmark Results" section) for what to look for — things like assertions that always pass regardless of skill (non-discriminating), high-variance evals (possibly flaky), and time/token tradeoffs.

4. Launch the viewer with both qualitative outputs and quantitative data:

   nohup python <skill-creator-path>/eval-viewer/generate_review.py \
     <workspace>/iteration-N \
     --skill-name "my-skill" \
     --benchmark <workspace>/iteration-N/benchmark.json \
     > /dev/null 2>&1 &
   VIEWER_PID=$!

   For iteration 2+, also pass --previous-workspace <workspace>/iteration-<N-1>.

   Cowork / headless environments: If webbrowser.open() is not available or the environment has no display, use --static <output_path> to write a standalone HTML file instead of starting a server. Feedback will be downloaded as a feedback.json file when the user clicks "Submit All Reviews". After download, copy feedback.json into the workspace directory for the next iteration to pick up.

Note: please use generate_review.py to create the viewer; there's no need to write custom HTML.

5. Tell the user something like: "I've opened the results in your browser. There are two tabs — 'Outputs' lets you click through each test case and leave feedback, 'Benchmark' shows the quantitative comparison. When you're done, come back here and let me know."

What the user sees in the viewer

The "Outputs" tab shows one test case at a time:

• Prompt: the task that was given
• Output: the files the skill produced, rendered inline where possible
• Previous Output (iteration 2+): collapsed section showing last iteration's output
• Formal Grades (if grading was run): collapsed section showing assertion pass/fail
• Feedback: a textbox that auto-saves as they type
• Previous Feedback (iteration 2+): their comments from last time, shown below the textbox

The "Benchmark" tab shows the stats summary: pass rates, timing, and token usage for each configuration, with per-eval breakdowns and analyst observations.

Navigation is via prev/next buttons or arrow keys. When done, they click "Submit All Reviews" which saves all feedback to feedback.json.

Step 5: Read the feedback

When the user tells you they're done, read feedback.json:

{
  "reviews": [
    {"run_id": "eval-0-with_skill", "feedback": "the chart is missing axis labels", "timestamp": "..."},
    {"run_id": "eval-1-with_skill", "feedback": "", "timestamp": "..."},
    {"run_id": "eval-2-with_skill", "feedback": "perfect, love this", "timestamp": "..."}
  ],
  "status": "complete"
}

Empty feedback means the user thought it was fine. Focus your improvements on the test cases where the user had specific complaints.

Kill the viewer server when you're done with it:

kill $VIEWER_PID 2>/dev/null

Improving the skill

⚠️ SCIENCECLAW: SKIP THIS SECTION. Go to ScienceClaw-Specific Instructions → Eval / Improve Cycle → Step 5 instead.

This is the heart of the loop. You've run the test cases, the user has reviewed the results, and now you need to make the skill better based on their feedback.

How to think about improvements

1. Generalize from the feedback. The big picture thing that's happening here is that we're trying to create skills that can be used a million times (maybe literally, maybe even more who knows) across many different prompts. Here you and the user are iterating on only a few examples over and over again because it helps move faster. The user knows these examples in and out and it's quick for them to assess new outputs. But if the skill you and the user are codeveloping works only for those examples, it's useless. Rather than put in fiddly overfitty changes, or oppressively constrictive MUSTs, if there's some stubborn issue, you might try branching out and using different metaphors, or recommending different patterns of working. It's relatively cheap to try and maybe you'll land on something great.

2. Keep the prompt lean. Remove things that aren't pulling their weight. Make sure to read the transcripts, not just the final outputs — if it looks like the skill is making the model waste a bunch of time doing things that are unproductive, you can try getting rid of the parts of the skill that are making it do that and seeing what happens.

3. Explain the why. Try hard to explain the why behind everything you're asking the model to do. Today's LLMs are smart. They have good theory of mind and when given a good harness can go beyond rote instructions and really make things happen. Even if the feedback from the user is terse or frustrated, try to actually understand the task and why the user is writing what they wrote, and what they actually wrote, and then transmit this understanding into the instructions. If you find yourself writing ALWAYS or NEVER in all caps, or using super rigid structures, that's a yellow flag — if possible, reframe and explain the reasoning so that the model understands why the thing you're asking for is important. That's a more humane, powerful, and effective approach.

4. Look for repeated work across test cases. Read the transcripts from the test runs and notice if the subagents all independently wrote similar helper scripts or took the same multi-step approach to something. If all 3 test cases resulted in the subagent writing a create_docx.py or a build_chart.py, that's a strong signal the skill should bundle that script. Write it once, put it in scripts/, and tell the skill to use it. This saves every future invocation from reinventing the wheel.

This task is pretty important (we are trying to create billions a year in economic value here!) and your thinking time is not the blocker; take your time and really mull things over. I'd suggest writing a draft revision and then looking at it anew and making improvements. Really do your best to get into the head of the user and understand what they want and need.

The iteration loop

After improving the skill:

1. Apply your improvements to the skill
2. Rerun all test cases into a new iteration-<N+1>/ directory, including baseline runs. If you're creating a new skill, the baseline is always without_skill (no skill) — that stays the same across iterations. If you're improving an existing skill, use your judgment on what makes sense as the baseline: the original version the user came in with, or the previous iteration.
3. Launch the reviewer with --previous-workspace pointing at the previous iteration
4. Wait for the user to review and tell you they're done
5. Read the new feedback, improve again, repeat

Keep going until:

• The user says they're happy
• The feedback is all empty (everything looks good)
• You're not making meaningful progress

Advanced: Blind comparison

⚠️ SCIENCECLAW: SKIP. Blind comparison requires subagents which are not available.

For situations where you want a more rigorous comparison between two versions of a skill (e.g., the user asks "is the new version actually better?"), there's a blind comparison system. Read agents/comparator.md and agents/analyzer.md for the details. The basic idea is: give two outputs to an independent agent without telling it which is which, and let it judge quality. Then analyze why the winner won.

This is optional, requires subagents, and most users won't need it. The human review loop is usually sufficient.

Description Optimization

⚠️ SCIENCECLAW: SKIP THIS SECTION. The automated run_loop.py / claude -p approach is not available. Go to ScienceClaw-Specific Instructions → Description Optimization for manual optimization guidance.

The description field in SKILL.md frontmatter is the primary mechanism that determines whether Claude invokes a skill. After creating or improving a skill, offer to optimize the description for better triggering accuracy.